Electrical Transverse Conveyor EQ 1/TE
- This Item: €4,030.49Excl. 19% VAT , excl. Shipping Cost
- Bosch Rexroth 3842998101. Positioning unit PE 1/P for WT 1/S WT 1/K €1,328.58Excl. 19% VAT , excl. Shipping Cost
- Bosch Rexroth 3842532814. Switching element €5.39Excl. 19% VAT , excl. Shipping Cost
Electrical Transverse Conveyor EQ 1/TE
- Section load up to 30 kg
- Lift cylinder – D = 25 mm
- Total stroke: 13 mm
- Motor mounting right (MA = R) or left (MA = L), with b = 160 mm also center (MA = M)
- Conveyor medium: Toothed belt with mesh top, suitable for use in an EPA
- Pneumatic equipment for 2 (top, center) or 3 (top, center, bottom) lift positions
- Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K)
- Special models on request
ESD | yes |
Length max [L max] [mm] | 5000 |
Length min [L min] [mm] | 320 |
Pneumatic straight connection [] [mm] | 4 |
Scope of delivery | HQ lift transverse unit, completely assembled,Belt section BS 1,Protective housing,Mounting kit for the drive of the lift transverse unit,Fastening material for attachment to an ST 1 section |
Preferred values [mm] | 80,120,160 |
Section load in accumulation operation [kg] | 30 |
Dry room [rF] | lt1 |
required compressed air connection [pmax] [bar] | 6 |
required compressed air connection [pmin] [bar] | 4 |
Recommended accessories | Depending on the installation situation, additional accessories may be required for transportation control:,Damper DA 1,Switch Bracket,M12x1 Sensor with Rated Sensing Range of SN 4 mm, Cannot be Installed Flush, but Rather with 0.5 mm |
Required accessories | Two throttle non-Return valves M5 for air intake throttling,Stop rail |
Weight [kg] | 0 |
Execution | TEC |
---|---|
Manufacturer Nr. | 3842998014 |
Manufacturer | Bosch Rexroth |
Country of Manufacture | Germany |
Weight | 0.009900 |
HS-Code | 84313900 |