Bosch Rexroth 3842998102. Positioning unit PE 1/P for WT 1/P

Positioning unit PE 1/P for WT 1/P

• Can be used with workpiece pallets WT 1/S, WT 1/K and WT 1/P
• Positioning via dowel pin and floating supported shaft on the side of the workpiece pallet
• Permissible vertical process force up to 100 N incl. workpiece pallet
• Repeat accuracy in X- and Y-direction: ± 0.015 mm
• One stop gate VE 1 or VE 1/D each must be used for pre-positioning the arriving Workpiece pallet and pre-separation.
• The PE 1/P can be mounted directly under the conveying section or on the table top on an automated station without interrupting the section profile.
• The PE 1/P also enables the Workpiece pallet to be accessed from below.