- HEPA filter (High Efficiency Particulate Air Filter)
- Filters out 99.97% of particles greater than 0.3μm
- Recommended for quiet laboratory and office
- This Item: €895.76Excl. 19% VAT , excl. Shipping Cost
- Hakko A1572. Pre-filter (qty 10) €12.54Excl. 19% VAT , excl. Shipping Cost
- Hakko A1573. Main filter €161.79Excl. 19% VAT , excl. Shipping Cost
Employing HEPA* filter! (High Efficiency Particulate Air filter)
Suitable for soldering in laboratory or office environment
HEPA filter captures 99.97% of particles greater than 0.3μm
FA-430 provides excellent filtering efficiency, 99.97% of particles greater than 0.3μm, by HEPA filter.
Filter replacement notification function ensures excellent trapping efficiency can be maintained at all times
No matter how sophisticated a fume extractor is, if the filter is not replaced at the right time, it will not be able to give maximum performance. The HAKKO FA-430 detects the number of fan rotation and notifies the operator of the appropriate time to replace the filter, guaranteeing a comfortable working environment.
- Pre-filter
When the pre-filter is 80% clogged or has been used for 200 hours, the orange indicator flashes on and off.
- Main filter
When the 10th pre-filter needs replacing, the orange and red lamps flash on and off.
Quiet operation and powerful suction.
Exhaust noise has been reduced without sacrificing suction performance by the addition of a silencer unit to the exhaust outlet to ensure smooth air outflow. A high-performance motor with 1,500 Pa of static pressure provides powerful suction and quiet operation.
Noise level dB (A) | Air volume m3/min | |
---|---|---|
HIGH | 53 | 4.7 |
MEDIUM | 50 | 3.7 |
LOW | 44 | 2.8 |
*Values measured when the unit was used with a 60 Hz power supply.
Catch harmful smoke with freestanding ducts and adjustable air volume to suit your working environment
Is your smoke absorber affected by air conditioning? Are you fed up with having to re-adjust ducts after every line change? The HAKKO FA-430 fume extractor is the answer to your problems.
Airflow adjustment
Three airflow modes are available: High, Medium, and Low. Significantly improve your working environment by using an airflow volume that suits the worksite and the job.
- Low mode: Not easily affected by the surrounding environment. For use in small, quiet locations. (For when low-noise operation is a priority.)
- Medium mode: For normal use.
- High mode: For use in locations that are significantly affected by the surrounding environment. (For when suction performance is a priority.)
What do you mean by "surrounding environment"?
Smoke flows in unexpected directions due to a variety of factors; not just because of the influence of air conditioning. High mode is recommended if your worksite is situated near a doorway, in a spot where people continuously pass by, near the exhaust outlet of a large machine, or in a similar location. It is possible to use low mode in laboratories and other places where these kinds of influences are limited.
Freestanding ducts
Ducts can be bent or lengthened as desired and maintain their shape after adjustment, letting you place them exactly where suction is needed. Say goodbye forever to ducts that are long, heavy, and hard-to-handle.
Length | Weight | |
---|---|---|
Duct for HAKKO FA-430 | 1.2m | 0.6kg |
Photo above: |
If the duct is mounted at an angle above the workpiece, it is easily affected by air conditioning | If the duct is mounted directly above, it can be difficult to see the workpiece | Duct is mounted on the worktable to provide excellent suction performance |
- Proper installation
Install the pre-filter inside the frame of the main filter as shown in image 1.
Be sure to check that there are no gaps at the corners as shown in image 2.
- Improper installation
If the pre-filter is not installed properly as shown in images 3 and 4, the main filter will degrade its original performance quickly.
Model No. | Packing List |
---|---|
FA-430 | Main unit, Power cord, Cap, Main filter, Pre-filters (x10), Instruction manual |
Duct set (C1571/C1572) is not included in FA-430 unit. Please purchase Duct set(s) when you order FA-430 unit.
Model No. | Packing List |
---|---|
Duct Set C1571 (With rectangular nozzle) | Duct, Adapter, Rectangular nozzle, Net, Instruction manual |
Duct Set C1572 (With round nozzle) | Duct, Adapter, Round nozzle, Net, Instruction manual |
Model No. | FA-430 |
---|---|
Power consumption | 110W |
Noise level | 50dB (MEDIUM mode) |
Maximum suction capacity | with single duct : MAX. 4.1m3/min. (145cfm) with two ducts : MAX. 4.7m3/min. (167cfm) |
Filtering efficiency | 99.97% 0.3µm (LOW, MEDIUM mode) 99.96% 0.3µm (HIGH mode) |
Static pressure | 1,500Pa |
Duct set (sold separately) | Length of duct : Φ55mm×1.2m (ESD SAFE) |
Dimensions | 330(W)×366(H)×343(D)mm |
Weight | 7.5kg |
* Filtering efficiency is an initial value of collection efficiency based on counting method for airborne dust collected by a single plate of filter (unfolded).
* Noise level is measured at a distance of 1 m from the face of unit in an anechoic room.
* Net in duct sets are not protected against electrostatic discharge.
Part No. | Name | Specifications | |
---|---|---|---|
A1573 | Main filter | ||
A1572 | Pre-filter (qty 10) | ||
B3619 | Cap |
Part No. | Name | Specifications | |
---|---|---|---|
C1571 | Duct set | with rectangular type nozzle | |
C1572 | Duct set | with round type nozzle | |
B3642 | Duct | Φ55mm×1.2m | |
B3620 | Adapter | ||
B3621 | Adapter | 3 inch | |
B3622 | Nozzle/rectangular type | ||
B3623 | Nozzle/round type | ||
B3625 | Net (qty 5) | ||
B2410 | Duct/2m | Φ75mm×2m | |
B2416 | Duct band (qty 2) | ||
B2418 | Bench top plenum/clear |
Part No. | Part Name | Notes |
---|---|---|
B3642 | Duct | ø55 x 1.2 m |
B3620 | Adapter | For attaching duct to main unit. |
-Choose from one of 2 types of nozzles for the independent duct.
Part No. | Part Name | Notes |
---|---|---|
B3622 | Nozzle, rectangular | For absorbing smoke from the side. |
B3623 | Nozzle, round | For absorbing smoke from above. |
B3625 | Net (5 per pack) | For preventing contaminants from being absorbed. (Mesh dimensions: Approx. 10 mm × 10 mm) |
-When using a bench top hood
The benchtop hood detailed below requires the separate purchase of a different sized duct, duct band, and 3-inch adapter.
Part No. | Part Name | Notes |
---|---|---|
B2418 | Benchtop hood | For stopping smoke from escaping upwards without being affected by air conditioning. *Requires ø75 duct, duct band (B2416), and 3-inch adapter (B3621). |
B2410 | Duct | Required when using benchtop hood. *ø75 x 2 m. Not freestanding. |
B2416 | Duct band | Required when using benchtop hood. |
B3621 | Adapter (for 3-inch duct) | Required when using benchtop hood and ø75 duct. |
Category | Title |
---|---|
How to use | How to mount a pre-filter |
Maintenance | How to extend filter life |
Preview | Title |
---|---|
Free-standing Duct |
Execution | TEC |
---|---|
Manufacturer Nr. | FA 430-12 |
Manufacturer | Hakko |
EAN | 4962615035913 |
Weight | 0.009900 |
Note | Es gibt keine Lieferung von Hakko Produkten in die Schweiz |
HS-Code | 84213925 |