Bernstein 9-354-A. ESD personal gro withing set 5 pcs

Area of application

Wrist grounding, as a safe method to derive electrostatic charge from people, consists of an adjustable wrist strap with woven silver-plated plastic fibers (close skin contact necessary) and a spiral cable, which connects the wristband with the earthing point via press buttons, electrically dissipative. The coiled cable has a safety resistance of 1 MOhm on each connection side and is approved for workplaces with a rated voltage up to 250 VAC. To ensure adequate insulation, the bracelet may only be stored in a dry place. Washing instructions for the bracelet: machine wash up to 30 ° C with soft washing powder, drying at low temperature (warm not hot), do not bleach! Avoid contact with acidic / alkaline solvents. ESD protection is retained for about 30 washing process.

Technical description

Antistatic mat surface resistance <1 x 10^8 ohm (DIN 54345-1, DIN 53482), extremely tear-resistant, cold resistance -10 ° C (DIN EN 1876-1), heat resistance +70 ° C, flammability hardly inflammable (according to LOBA regulation , NFP 92507: M2), abrasion resistant, antimicrobial

General information

EPA suitable. For working in electrostatically protected areas (ESD workplace / ESD protection zone).

Content

ESD Handling Set consisting of:

• 9-354-100 ESD table mat 500x400x0.5mm
• 9-341-1 ESD contact bracelet yellow
• 9-341-2 ESD spiral cord for bracelet highly elastic 2.4m yellow
• 9-344-1 ESD earthing cable 1 MOhm, 1800mm 1DK 10mm and eyelet 4mm
• 9-359-2 ESD grounding plug 2x10mm and M5 connection
• #