ESD personal grounding set 5 pcs
- This Item: €83.71Excl. 19% VAT , excl. Shipping Cost
- Bernstein 6900. ESD tool case EPA 33 pcs €786.85Excl. 19% VAT , excl. Shipping Cost
- Bernstein 6-618. ESD socket wrench 4.5 mm €6.96Excl. 19% VAT , excl. Shipping Cost
- content: article listing see below
- ESD safe protection and workplace support for SMD / THT assembly
- resistance 10^6 to 10^7 ohm (back side 10^3 to 10^4 ohm)
- top and back side black electrostatically synthetic rubber
- with 2 press buttons 10 mm for ground connection
- solder-resistant work place pad with professional equipment for personal grounding
- heat-resistant, abrasion-resistant, halogen-free
- extremely wear-resistant, permanently elastic
- measures 900 x 610 x 1,5 mm
- weight 1072 g
Area of application
Wrist grounding, as a safe method to derive electrostatic charge from people, consists of an adjustable wrist strap with woven silver-plated plastic fibers (close skin contact necessary) and a spiral cable, which connects the wristband with the earthing point via press buttons, electrically dissipative. The coiled cable has a safety resistance of 1 MOhm on each connection side and is approved for workplaces with a rated voltage up to 250 VAC.
Technical description
Products meet the requirements of DIN EN 61340-5-1. Specifications of the mat: Abrasion (load: 5N) 130 mm³, hardness 80 Shore A, impression test 0.1 mm, temperature range of application up to + 60°C. Adjustable elastic wristband with woven in silver-plated synthetic fibers, allergy-free. Meets the safety requirements for wrist grounding according to BGFE. To ensure adequate insulation, the bracelet may only be stored in a dry place. Washing instructions for the bracelet: machine wash up to 30 ° C with soft washing powder, drying at low temperature (warm not hot), do not bleach! Avoid contact with acidic / alkaline solvents. ESD protection is retained for about 30 washing process.
General information
EPA suitable. For working in electrostatically protected areas (ESD workplace / ESD protection zone).
Content
ESD handling set consists of:
- 9-360-0 ESD grounding mat black 900x610x1.5mm
- 9-341-1 ESD contact bracelet yellow
- 9-341-2 ESD spiral cord for bracelet highly elastic 2400mm yellow
- 9-344-1 ESD earthing cable 1 MOhm, 1800mm 1DK 10mm and eyelet 4mm
- 9-359-2 ESD grounding plug 2x10mm and M5 connection
Manufacturer Nr. | 9-360-A |
---|---|
Manufacturer | Bernstein |
EAN | 4250838528900 |
Weight | 0.009900 |
HS-Code | 39269097 |