What is the Bosch Rexroth TS 5 transfer system and what industrial applications does it serve?

The Bosch Rexroth TS 5 transfer system is a modular conveyor platform designed for precise workpiece positioning and heavy-duty material handling in automated production lines. This system integrates positioning units like the PE 5 series, lifting units such as the HQ 5/XH and HQ 5/H variants, and indexing mechanisms for assembly, testing, and packaging operations. Manufacturing industries including automotive, electronics, and machinery production utilize the TS 5 system for continuous transfer applications where workpieces require accurate positioning at multiple stations. The system accommodates carrier plates up to 845x1040mm dimensions as demonstrated by the WT5 carrier plate specifications, making it suitable for handling medium to large components in high-volume production environments.

What are the key technical selection criteria for Bosch Rexroth TS 5 positioning units?

Selection of TS 5 positioning units depends primarily on stroke length, load capacity, and mounting configuration requirements for the specific application. The PE 5/L-T and PE 5/T variants offer different stroke lengths with the T-configuration providing extended travel distance, while the standard PE 5 and PE 5/L units serve applications with shorter positioning requirements. Load handling capacity varies between lifting units, with the HQ 5/XH providing extended height capability compared to the standard HQ 5/H configuration. Carrier plate dimensions determine workpiece compatibility, with the WT5/845X1040X19.05 supporting larger components requiring 845x1040mm work surface area. Drive system selection through the AB5 drive assembly must match the required positioning speed, repeatability tolerance, and cycle time specifications for optimal production throughput.

Which international standards and certifications apply to Bosch Rexroth TS 5 transfer systems?

Bosch Rexroth TS 5 transfer systems comply with ISO 9001 quality management standards and adhere to EN ISO 13849 safety requirements for machinery control systems used in industrial automation. The system components meet CE marking requirements under the Machinery Directive 2006/42/EC, ensuring compliance with European safety standards for automated production equipment. Electrical components integrate according to IEC 61131 programmable controller standards, while mechanical assemblies follow DIN standards for precision and durability in continuous operation. EMC compatibility aligns with EN 61000 electromagnetic compatibility standards, preventing interference with other production equipment. Installation and operation must comply with local workplace safety regulations including OSHA standards in North America and corresponding national safety directives in other regions.

What are the main differences between TS 5 positioning unit variants PE 5, PE 5/L, PE 5/T, and PE 5/L-T?

The PE 5 serves as the standard positioning unit for basic linear positioning applications, while the PE 5/L variant incorporates extended stroke length for applications requiring greater travel distance. The PE 5/T configuration features a T-slot mounting design that enables flexible positioning and reconfiguration within the transfer system framework. The PE 5/L-T combines both extended stroke capability and T-slot mounting, providing maximum flexibility for complex positioning sequences requiring both long travel distances and adaptable mounting options. Each variant maintains identical interface specifications but differs in mechanical stroke limits, mounting methodology, and integration complexity. Selection depends on the specific positioning requirements, available mounting space, and future reconfiguration needs of the production line.

What are the installation requirements and system compatibility specifications for TS 5 transfer systems?

TS 5 transfer system installation requires a level mounting surface with flatness tolerance within ±0.1mm over the system length to ensure proper positioning accuracy. The system integrates with standard industrial automation controllers through the AB5 drive assembly, which accepts 24VDC control signals and provides position feedback through industry-standard fieldbus protocols. Compressed air supply at 6 bar operating pressure is necessary for pneumatic positioning units, while electrical connections require 400VAC three-phase power for motor-driven components. Protective covers like the OC845X845VE300/1000 and OCT845X845VE300/1000 variants must be installed according to IP54 protection requirements in dusty environments. System compatibility extends to major PLC brands including Siemens, Allen-Bradley, and Mitsubishi through standardized communication interfaces.

What safety ratings and environmental operating conditions apply to Bosch Rexroth TS 5 systems?

Bosch Rexroth TS 5 transfer systems operate safely within ambient temperatures from +5°C to +40°C, with optional heating elements available for applications in colder environments down to -10°C. The system maintains IP54 protection rating when equipped with appropriate protective covers, providing dust and splash water resistance suitable for most industrial production environments. Pneumatic components operate at maximum 8 bar pressure with safety relief valves set at 10 bar to prevent over-pressurization damage. Electrical safety complies with Category 3 requirements per EN ISO 13849, incorporating dual-channel safety circuits and monitored emergency stop functions. The system withstands vibration levels up to 2g acceleration according to IEC 60068-2-6 testing standards, ensuring reliable operation in typical factory floor conditions with nearby heavy machinery.

What maintenance schedule and service life expectations apply to TS 5 transfer system components?

Bosch Rexroth TS 5 transfer systems require monthly lubrication of linear bearings and quarterly inspection of pneumatic seals to maintain optimal positioning accuracy throughout the expected 8-year service life. Drive components within the AB5 assembly need annual replacement of wear elements and biannual calibration verification to ensure repeatability within ±0.02mm positioning tolerance. Protective covers require weekly cleaning and semi-annual replacement of sealing elements to maintain IP54 protection rating in dusty production environments. Positioning units like the PE 5 series typically achieve 10 million positioning cycles before requiring major overhaul, while lifting units such as the HQ 5/XH can operate for 5 million cycles under rated load conditions. Preventive maintenance intervals can extend to 18 months in clean environments, but harsh conditions with high particulate contamination may require monthly component inspection and more frequent seal replacement.

Transfer system Bosch Rexroth TS 5

Transfer systems Bosch Rexroth

The Bosch Rexroth TS 5 transfer system is a heavy-duty pallet conveyor platform engineered for continuous-flow assembly lines, handling workpiece carriers up to 20 kg per pallet at belt speeds from 3 to 24 m/min. With a system width range of 160 to 630 mm and pallet dimensions from 100 x 100 mm up to 600 x 600 mm, the TS 5 accommodates a broad spectrum of assembly tasks - from small electronic subassemblies to large automotive modules. Positioning repeatability of ±0.05 mm and integrated workpiece carrier locking via pneumatic stop units meet the precision demands defined under ISO 9283 and DIN EN ISO 4413.

As an authorized Bosch Rexroth distributor, esd.equipment stocks 243 TS 5 components including straight conveyors, curves, lifts, transfer units, stop modules, and guide rails - all designed for tool-free reconfiguration and full compatibility with the Bosch Rexroth MTpro planning software. The modular aluminum profile construction complies with CE Machinery Directive 2006/42/EC and integrates directly into Industry 4.0 production environments.

Key technical advantages - Bosch Rexroth TS 5 at a glance

⚡ Up to 20 kg pallet load - heavy-duty workpiece carrier capacity per conveyor section

↕ 160-630 mm system width - scalable track gauge for diverse product sizes

🛠 Tool-free reconfiguration - T-slot aluminum profile system, ISO 9283 compliant

⚙ 3-24 m/min belt speed - variable drive units for cycle-time optimization

🔒 ±0.05 mm positioning accuracy - pneumatic stop and lift-locate units, DIN EN ISO 4413

✓ CE Machinery Directive 2006/42/EC - fully certified, MTpro software compatible

Bosch Rexroth TS 5 - Product overview

Component group	Key specification	Function	Notable feature
Straight conveyors	L: 250-2000 mm, W: 160-630 mm	Main transport sections	Modular length extension without tools
Curve units	90° and 180°, R min. 350 mm	Layout routing	Constant belt tension through all angles
Vertical lifts	Stroke up to 500 mm, 20 kg	Multi-level line linking	Integrated safety guard, CE certified
Stop modules	Repeatability ±0.05 mm	Workpiece carrier positioning	Pneumatic or electric actuation options
Transfer units	90° cross-transfer, up to 20 kg	Line branching and merging	Compact footprint, DIN EN ISO 4413
Drive units	3-24 m/min, 24/48/230 V AC/DC	Belt actuation and speed control	Frequency-inverter ready, low noise ca. 65 dB(A)
Workpiece carriers	100x100 to 600x600 mm, 20 kg max	Product transport and fixturing	T-slot top surface, RFID-tag compatible
Guide rail sets	Anodized aluminum, all standard widths	Lateral pallet guidance	Quick width adjustment via clamping profile

Typical application areas: Electronics manufacturing and SMT assembly (IPC-A-610, IEC 61340-5-1), automotive body and powertrain assembly (IATF 16949, VDA 6.3), medical device production (ISO 13485), semiconductor back-end packaging (SEMI S2), industrial appliance and white goods manufacturing (ISO 9001), aerospace component assembly (AS9100), and general-purpose lean manufacturing cells requiring flexible pallet flow configurations.

✓

243 TS 5 components in stock Straight sections, curves, lifts, stops, drives and carriers - all from Bosch Rexroth authorized stock

📦

Fast delivery across Europe Standard TS 5 components dispatched same or next business day, project quantities on request

🛡

CE certified - 2006/42/EC All TS 5 modules comply with the Machinery Directive and DIN EN ISO 4413 pneumatic safety requirements