The perfect solution for hot-air and soldering jobs Clear handling advantages and tangible cost savings in one unit. That’s what you get with the WXA 2 hot-air station. Ideal for complex hot-air jobs or traditional soldering. The amount of hot air (20 l/min at 6 bar) can be adjusted to any value in range. And of course the entire range of high-performance hot-air and soldering accessories is compatible with this station.
Adjustable air amount The amount of air can be controlled using the rotary knob. An external compressed air supply is needed. The amount of air is displayed in percent.
Adjustable operating mode: The unit has 3 separate operating modes. Operating mode level 1 – the air flow continues for as long as the button on the hot-air iron or foot switch is pressed. Operating mode level 2 – if the button is pressed once, the hot-air flow continues for between 0 and 300 seconds, stopping at the end of the set time. Operating mode level 3 – the WXHAP 200 switches on with one press of the button and off with the second press.
Finger and foot switches The air flow is controlled using the finger switch in the handle. It can also be controlled by a foot switch (optional).
Ion trap All WX devices are ESD-safe and can be used in electrostatically protected areas. The ion trap in the iron ensures that the emerging hot air is free of static electricity
Inert gas operation An inert gas (nitrogen) can also be used for challenging soldering jobs to generate the hot air.
for operation with external compressed air
optimal set for hot air work
simultaneous operation of 2 soldering tools
Front USB interface for firmware update, parameterization and monitoring; any commercially available USB memory stick fits into USB interface
Compressed air connection: outer diameter 6 mm (0, 24"), oil-free, dry compressed air
