JBC Soldering S.L. - a Spanish manufacturer with over 95 years of experience - sets the global standard for professional soldering technology. The exclusive JBC heating system integrates the heating element and temperature sensor directly inside the soldering cartridge, delivering heat-up times under 2 seconds, temperature stability of ±2 °C and - thanks to Sleep and Hibernation modes - a tip life up to 5 times longer than conventional systems.
As an authorized JBC distributor, esd.equipment offers the complete product range: from compact all-round soldering stations and precision Nano systems for ultra-fine SMD components to Heavy Duty solutions for high thermal mass applications - as well as the JBC B.IRON, the world's first professional battery-powered soldering system for cordless use in the field. All products are ESD-compliant to IEC 61340 and meet EU conformity requirements.
Typical applications: Electronics manufacturing (EMS/OEM), SMD and through-hole assembly, BGA rework, automotive electronics, aerospace and defense (IPC-7711/7721, AS9100), medical device manufacturing, research & development, and field service with the cordless B.IRON system.
JBC
Root Catalog
JBC - Professional soldering and rework technology
JBC is a Spanish manufacturer specialising in professional soldering and rework technology for electronics production and repair. The range spans automatic soldering units for robot cells, complete ESD rework stations combining soldering, desoldering and hot air, and preheating systems for printed circuit boards.
On esd.equipment you will find selected JBC systems for demanding workshop and production use - including infrared and convection bottom preheaters, multi-channel rework stations with MSE desoldering module, and solder fume extraction units. Made in Spain stands for well-engineered tools and durable electronics workplaces.
JBC Bestsellers
Preheater Set for PCBs up to 51 x 61 cm, 5400 W, 6 Zones - JBC PHXLE-1KA
View product ->
IR Preheater 5400 W for PCBs up to 51 x 61 cm, 230 V, with PCB Holder - JBC PHXLE-2KA
View product ->
Preheater for PCBs up to 51 x 61 cm, 230 V, 6 zones - JBC PHXLE-2A
View product ->
Automatic Soldering Unit for Robots, T245-Class 160 W, R245 - JBC HA245A-5B
View product ->
Automatic Heavy-Duty Soldering Unit for Robot, 250 W - JBC HA470A-5B
View product ->
SMD Rework System with Hot Air, Preheater and Rework Arm, 230 V - JBC SRWS-2SC
View product ->
ESD Rework System with Soldering, Desoldering and Hot Air, 230 V - JBC RMSD-2QA
View product ->
Infrared Bottom Preheater 1800 W, 2 Zones, for PCBs up to 36 x 28 cm - JBC RBB-2A
View product ->
JBC product areas
Complete rework systems
ESD Rework System with Soldering, Electric Desoldering and 700 W Hot Air, 230 V - JBC RMSE-2QG
View product ->
Complete Rework Station 700 W 230 V with MSE Desoldering Module - JBC RMSE-2QF
View product ->
4-Channel Rework Station 150 W/Channel with Electric MSE-B Desoldering Module - JBC DMPSD-2QA
View product ->
ESD 4-Channel Complete Rework Station, 4 Tools, 230V - JBC DMPSE-2QC
View product ->
4-Tool ESD Rework Station, 160 W/Tool, with MSE Desoldering Module - JBC DMPSE-2QB
View product ->
ESD 4-Tool Rework Station with DT530 Desoldering Iron, 150 W/Tool, 230 V - JBC DMSD-2QB
View product ->
2-Tool-Rework- und Entlötstation 160 W pro Werkzeug, 90-450 C, mit DR560 und T245, Premium Line - JBC DMSE-2QB
View product ->
Nitrogen control system 0.5 to 3 SLPM for DDE and DME control units - JBC MNE-A
View product ->
Choosing the right JBC system
Rework station or preheater?
The choice depends on the task:
- Complete rework systems (RMSD, RMSE series) combine soldering, desoldering and hot air at one ESD workplace - ideal for repair and small-batch work.
- Preheating systems (PHXLE, PHBE, RBB series) heat the board from below and reduce thermal stress on large or multilayer boards.
- Multi-channel stations (DMPSE, DMPSD series) drive up to four tools at once for parallel workplaces.
Power and board size
Smaller boards are well served by 1800 W bottom preheaters (e.g. RBB-2A up to 36 x 28 cm). Large assemblies up to 51 x 61 cm benefit from 5400 W systems with six heating zones (PHXLE series). For automated soldering, choose a unit matched to the heat demand - the T245 class (160 W) for standard work, heavy-duty variants (250 W) for high-mass joints.
Which JBC system fits?
| Criterion | Complete rework system | Preheating system | Multi-channel station |
|---|---|---|---|
| Use | Soldering, desoldering, hot air | Preheating from below | Multiple workplaces |
| Example series | RMSD, RMSE, SRWS | PHXLE, PHBE, RBB | DMPSE, DMPSD, DMSD |
| Tools | Combined per station | Complements soldering bench | Up to 4 at once |
| Board size | Repair, small batch | Up to 51 x 61 cm | Production, parallel use |
| ESD protection | Yes | Model-dependent | Yes |
| Typical users | Repair, lab | Rework with large boards | Production, series |
JBC at a glance
Frequently asked questions about JBC
Where does JBC come from?
JBC is a Spanish manufacturer of professional soldering and rework technology. Development and manufacturing take place in Spain (Made in Spain).
What products does JBC offer?
The range includes automatic soldering units, complete ESD rework stations combining soldering, desoldering and hot air, infrared and convection preheating systems for PCBs, and solder fume extraction units for electronics production and repair.
What is a JBC complete rework system?
A complete rework system such as the RMSD or RMSE series combines soldering, electric desoldering and hot air at one ESD-safe workplace. This lets you repair and replace SMD and THT components at a single station.
Why do I need a JBC preheater?
Preheating systems heat the board from below and reduce thermal stress during soldering or rework. This matters especially for large or multilayer assemblies - JBC offers systems from 1800 W to 5400 W.
Can JBC soldering units be automated?
Yes. Automatic soldering units of the T245 class and heavy-duty variants are designed for integration into robot cells and inline processes, making them suitable for automated electronics production.
Need advice or a project price?
Our team helps you select the right JBC soldering and rework technology and is happy to prepare a quote for your electronics workplace.
