Ersa

Root Catalog

Partner brand - Made in Germany

Ersa - soldering and rework technology for professional electronics production

Hybrid rework, reflow process control and soldering stations made in Germany

Ersa, part of the Kurtz Ersa group, is a German manufacturer of soldering and rework technology for electronics production and repair. The range spans hybrid rework systems of the HR series, reflow process cameras and heating heads through to i-CON soldering and hot-air stations.

On esd.equipment you will find Ersa systems for removing and placing SMD components, for reproducible reflow process control and for the ESD-safe hand-soldering workplace. Accessories such as heating plates, board holders and PCB exchange frames round off the range - all made in Germany.

🇩🇪Made in GermanyErsa develops and manufactures soldering and rework technology in Germany as part of the Kurtz Ersa group.

🔬Reflow process controlReflow Process Cameras (RPC) make the soldering process under the component visible and reproducible.

🔧Rework for SMD and BGAHybrid rework systems of the HR series combine IR and hot air for precise removal and placement.

📦Complete with accessoriesHeating heads, heating plates, board holders and PCB exchange frames to match the HR systems.

Selection

Ersa Bestsellers

View all products ->

HR 500 Hybrid Rework System, 2500 W - Ersa 0HR500 View product ->

HR100A Hybrid Rework System with Heating Plate, 200 W IR/Hot Air - Ersa 0IRHR100A-HP View product ->

Ersa 0VSSC060VK3. Ersa Mobil scope kit 3 View product ->

Heating Head 60x60 mm for HR 600/3 P and HR 600 XL - Ersa 0HR667 View product ->

Reflow Process Camera RPC for HR 600 XL - Ersa 0HR610XL View product ->

Ersa 0VSSC060VK1. Ersa Mobil scope kit 1 View product ->

PCB Interchangeable Frame HR600XL, 2 Perforated Rails with 6 PCB Holders - Ersa 0HR625XL View product ->

Reflow Process Camera (RPC Camera) for HR600/3P - Ersa 0HR610/3P View product ->

Range

Ersa product areas

Go to category ->

HR hybrid rework systems 8 products Rework systems with IR and hot air for SMD and BGA components. Reflow process cameras (RPC) 2 products Cameras for observing and controlling the reflow soldering process. i-CON soldering and hot-air stations 14 products Multi-channel soldering and hot-air stations with vacuum, ESD-safe. Board holders and exchange frames 6 products Holders and PCB exchange frames for secure fixturing during rework.

Popular

i-CON soldering and hot-air stations

Go to category ->

IRHP 100A Heating Plate with Stand, 800 W - Ersa 0IRHP100A View product ->

VARIO 4 MK2 ESD 4-Channel Soldering and Hot-Air Station with Vacuum - Ersa 0ICV4005AICXV View product ->

i-CON VARIO 4 MK2 ESD 4-Channel Soldering and Hot-Air Station with Vacuum, without Tools - Ersa 0ICV4035A View product ->

i-CON VARIO 2 MK2 Soldering and Hot-Air Station, ESD 2-channel with X-Tool vario 150 W and i-Tool AIR S 200 W - Ersa 0ICV2005AXV View product ->

Extra Downward Component Clearance 65 mm (35 mm Standard) for HR600 - Ersa 0HR615 View product ->

i-CON VARIO 2 MK2 ESD 2-Channel Soldering and Hot-Air Station, 200 W - Ersa 0ICV2005AC View product ->

i-CON VARIO 2 MK2 Desoldering Station, ESD 2-Channel, X-Tool Vario 150 W - Ersa 0ICV2005XV View product ->

i-CON VARIO 2 MK2 ESD 2-Channel Desoldering Station with X-Tool vario 150 W - Ersa 0ICV2005XVI View product ->

Buying advice

Choosing the right Ersa rework system

Hand-soldering workplace or rework system?

For classic soldering and working on individual joints, a soldering and hot-air station such as the i-CON VARIO series is sufficient. As soon as you need to reproducibly remove and place large SMD or BGA components, a hybrid rework system of the HR series is the right choice, because it combines controlled top and bottom heating.

What to look for when selecting a system?

PCB size: larger HR systems and matching exchange frames handle formats up to around 535 x 300 mm.
Process control: a Reflow Process Camera (RPC) makes the soldering step visible and documentable.
Accessories: heating plates, heating heads and board holders should match the chosen HR system.

Comparison

Soldering and hot-air station or hybrid rework system?

Criterion	i-CON soldering/hot-air station	HR hybrid rework system
Use	Hand soldering, individual joints	Removing and placing large components
Heat source	Soldering iron and hot air	IR bottom heating combined with hot air
Typical components	THT and single SMD	SMD, BGA and larger packages
Process control	manual, by the operator	optional Reflow Process Camera
PCB fixturing	at the workplace	board holders and exchange frames
Reproducibility	depends on the operator	high, through a guided process

Good to know

Ersa at a glance

GermanyManufacturer, part of the Kurtz Ersa group

SolderingSoldering stations for electronics production

ReworkHybrid rework systems of the HR series

ReflowProcess cameras that make soldering visible

FAQ

Frequently asked questions about Ersa

Who is Ersa?

Ersa is a German manufacturer of soldering and rework technology for professional electronics production and repair and is part of the Kurtz Ersa group. Its range includes hybrid rework systems, reflow process cameras and soldering stations.

What is a hybrid rework system of the HR series?

A hybrid rework system such as the HR 500, HR 200 or HR100A combines infrared bottom heating with hot air to remove and re-place SMD and BGA components in a controlled way. The guided process delivers reproducible results.

What is the Reflow Process Camera (RPC) used for?

The Reflow Process Camera makes the soldering process under the component visible. It lets you observe, control and document the melting of the solder, which helps with process development and quality assurance during rework.

What does the i-CON VARIO station do?

The i-CON VARIO 4 MK2 is an ESD-safe multi-channel soldering and hot-air station with vacuum. It is suited to hand-soldering and hot-air tasks at the professional electronics workplace.

Is there matching accessory for the HR systems?

Yes. For the HR rework systems Ersa offers heating heads, heating plates, board holders and PCB exchange frames that let you securely fixture and process different PCB formats.