Leica Geosystems

Root Catalog

Partner brand - measuring technology from Switzerland

Leica Geosystems - laser measurement for surveying, construction and utility locating

Measure distances, transfer heights, find buried utilities

Leica Geosystems AG is based in Heerbrugg, Switzerland, belongs to the Hexagon group and develops measuring technology for construction work. Our shop carries the site lines of the brand: DISTO laser distance meters, Lino line and point lasers, automatic levels of the NA series, Rugby rotating lasers, PIPER pipe lasers and cable and utility locating with DD and ULTRA.

The instruments are built for rough environments and reach protection ratings from IP54 up to IP68 and IPX8 depending on the model. Many items ship as a complete kit with handheld receiver, tripod, levelling staff, signal transmitter or target plate, so the equipment for one task is complete. We are happy to advise you on the right instrument class and on accessories.

🇨🇭Swiss measuring technologyLeica Geosystems AG, headquartered in Heerbrugg and part of the Hexagon group.
📐Surveying, construction, locatingFrom interior measurement to tracing buried lines on civil engineering sites.
🔧Complete kits, not loose partsRotating lasers with Rod Eye, levels with tripod and staff, locators with signal transmitter.
📦Advice before you orderWe clarify beam colour, protection rating, laser class and accessories with you.
Selection

Best selling Leica Geosystems instruments

View all products ->
Range

The Leica Geosystems product lines

View category ->
Popular

PIPER pipe lasers

View category ->
Buyer guide

Choosing the right Leica Geosystems instrument

Red or green - the beam colour decides visibility

Many construction lasers of the brand come in two beam colours. A red beam is sufficient for interior work and subdued light. A green beam is far easier to see in daylight and over distance and pays off wherever you want to read the line or point directly on the structure.

Green models carry a G in the name, for example Lino L2G, Rugby 640G or Piper 200G.

Check protection rating and laser class

Depending on the design the instruments cover protection ratings from IP54 up to IP68 and IPX8. A low rating is enough for dry interior work. In the pipe trench, in earthworks and in permanently wet conditions choose a highly protected unit.

Laser classes range from 1 through 2 and 2M up to 3R. Brighter classes are visible further away but require the safety instructions to be observed and the operators to be briefed.

Read directly or work with a handheld receiver

Distance meters and line lasers are read directly. Rotating lasers instead work with a handheld receiver such as the Rod Eye, which signals the position of the laser plane optically and acoustically. This is what makes large working areas usable even when the beam is no longer visible to the naked eye.

  • Interior work: read directly on wall and ceiling
  • Outdoor site: receiver on the levelling staff
  • Earthmoving: machine receiver on the machine

Planning pipe laying and utility locating

Pipe lasers of the PIPER series are given a grade setting in percent and project the beam along the planned pipe axis onto a target plate. That lets you control the fall over the whole section.

Locating follows the transmitter and receiver principle. A signal transmitter applies a signal to the line, directly, inductively, through a signal clamp or through a sonde inside the pipe. The locator then searches for that signal at the surface. The selection criteria are the achievable locating depth and the available frequencies.

Comparison

Which instrument class suits which task?

CriterionDISTOLinoNA levelRugbyPIPERDD and ULTRA
ClassLaser distance meterLine and point laserAutomatic levelRotating laserPipe laserUtility locator
Typical taskMeasure lengths, areas and volumesPlumb lines, alignment, right anglesTransfer heights and check fallPut a level or sloped plane across the siteSet the fall in the pipe trenchFind cables and pipes in the ground
Place of useIndoors and outdoorsMainly indoorsIndoors and outdoorsSite indoors and outdoorsPipe trench and manholeEarthworks and utility networks
OperationOne userOne userUsually two people with a staffOne user with handheld receiverOne user with target plateOne user with signal transmitter
ReadoutDisplay on the unitVisible lines and pointsTelescope and levelling staffRod Eye or machine receiverTarget plate inside the pipeDisplay with signal and depth reading
Beam colourRedRed or greenNo laserRed or greenRed or greenNo laser
Typical accessoriesDST 360-X adapter and tripodWall bracket and target plateTripod and levelling staffRod Eye, remote control, machine receiverAlignmaster and target setSignal clamp, sonde, trace rod
Typical userInterior fit out and planningDrywall and electrical tradesSurveying and shell constructionCivil and road constructionSewer and pipeline constructionCivil works and network operators
Good to know

Leica Geosystems in figures

SwitzerlandHeadquarters in Heerbrugg, part of the Hexagon group
394Leica Geosystems items in our shop
6Product lines from DISTO to utility locating
IP68Protection ratings up to IP68 and IPX8 depending on the unit
FAQ

Frequently asked questions about Leica Geosystems

Is Leica Geosystems the same company as Leica Microsystems or Leica Camera?

No. Leica Geosystems AG of Heerbrugg in Switzerland belongs to the Hexagon group and builds measuring technology for surveying, construction and utility locating. Leica Microsystems and Leica Camera are separate companies based in Wetzlar, Germany. All three carry the Leica name for historical reasons but are independent businesses with completely different products. This brand page lists Leica Geosystems instruments only.

Should I choose a construction laser with a red or a green beam?

A green beam is far more visible in daylight and over distance than a red one, which is why green units have the advantage outdoors and in brightly lit rooms. A red laser is sufficient for interior work in subdued light. At Leica Geosystems the green variants are marked with a G in the model name, for example Lino L2G, Rugby 640G or Piper 200G.

What is the Rod Eye handheld receiver used for with a rotating laser?

A rotating laser spins the beam into a full plane. Beyond a certain distance and in daylight that plane can no longer be seen with the naked eye. The Rod Eye handheld receiver is moved along the levelling staff or the structure and indicates optically and acoustically whether it sits above, on or below the laser plane. Only this makes large working areas on site practical to handle.

How does a PIPER pipe laser set the fall of a pipe run?

The pipe laser is set up inside the pipe or in the manhole and is given a grade setting in percent. It projects the beam along the planned pipe axis onto a target plate in the next pipe section. The pipes are then aligned so that the laser spot sits in the centre of the target, which keeps the fall correct over the whole section. Accessories such as the Alignmaster, target sets and a remote control are included with many packages.

How does cable and utility locating with DD and ULTRA work?

Locating follows the transmitter and receiver principle. A signal transmitter applies a defined signal to the line to be traced, either directly through connection clamps, inductively or through a signal clamp around the cable. For non conductive pipes a sonde is pushed into the pipe. The locator then searches for that signal at the surface and shows the route and an estimated depth. The key selection criteria are the achievable locating depth and the available frequencies.

Need advice or a trade quotation?

We help you choose beam colour, protection rating and accessories and put together a kit that fits your task. Phone +49 212 38340680.

View as Grid List

Items 1-24 of 394

Set Ascending Direction
Page
per page