What are Bosch Rexroth connection elements and where are they primarily used in industrial applications?

Bosch Rexroth connection elements are precision-engineered mechanical fastening components designed for modular assembly systems in industrial workplaces and automation environments. These components include bolt connectors with D17 thread specifications, heavy-duty connectors rated for dynamic loads up to 180x180mm configurations, and supporting brackets available in standardized lengths from 255mm to 495mm. They serve critical applications in automotive assembly lines, electronics manufacturing facilities, and general industrial workstations where reliable mechanical connections between aluminum profiles and structural components are essential for operational safety and system rigidity.

What technical specifications should I consider when selecting Bosch Rexroth connection elements for my application?

Selection of Bosch Rexroth connection elements requires evaluation of load capacity ratings, profile groove compatibility, and material specifications for your specific application. The heavy-duty connectors support dynamic loading conditions while bolt connectors like the D17x100 and D17x60 variants accommodate different engagement depths based on structural requirements. Profile groove compatibility is critical, with sliding blocks available for groove 6 steel stainless and groove 10 steel zinc-plated configurations. Supporting brackets must be selected based on span requirements, with standardized lengths of 255, 335, 415, and 495mm to match your workspace geometry and load distribution needs.

Which international standards and certifications apply to Bosch Rexroth connection elements?

Bosch Rexroth connection elements comply with ISO 9001 quality management standards and DIN EN 755 specifications for aluminum structural profiles used in industrial applications. The stainless steel sliding blocks meet DIN 1.4301 material grade requirements for corrosion resistance, while zinc-plated steel components conform to DIN EN ISO 12944 coating standards for industrial atmospheric conditions. All mechanical fasteners adhere to DIN 934 and ISO 4762 threading specifications to ensure compatibility with standard metric fastening systems. These certifications guarantee dimensional accuracy, material traceability, and performance consistency across international industrial installations.

How do the different variants of Bosch Rexroth connection elements differ in their applications and capabilities?

Bosch Rexroth connection elements vary significantly in their load handling capabilities and application suitability based on design configuration. Heavy-duty connectors with 180x180 dynamic load ratings are engineered for high-vibration environments and moving machinery applications, while standard bolt connectors with D17 threading serve static structural connections in workstation assemblies. Supporting brackets differ by orientation and length, with left and right-handed versions ensuring proper load distribution across spans from 255mm to 495mm. Sliding blocks distinguish between profile groove sizes, with groove 6 stainless variants offering superior corrosion resistance for cleanroom environments compared to groove 10 zinc-plated options designed for standard industrial conditions.

What installation requirements and system compatibility considerations apply to Bosch Rexroth connection elements?

Bosch Rexroth connection elements require precise profile groove alignment and torque specifications during installation to achieve rated load capacities and system reliability. The sliding blocks must be properly seated within their designated groove 6 or groove 10 profiles before tightening, with installation torque values typically ranging from 15 to 25 Nm depending on component size and application requirements. Supporting brackets require accurate positioning with mounting kit components to distribute loads evenly across the connection interface. All connection elements integrate seamlessly with Bosch Rexroth aluminum profile systems and maintain compatibility with standard T-slot accessories, ensuring modular expandability and reconfiguration capabilities for evolving workplace requirements.

What safety ratings and environmental operating conditions do Bosch Rexroth connection elements support?

Bosch Rexroth connection elements operate safely within industrial temperature ranges from -20°C to +80°C while maintaining their specified load ratings and dimensional stability. The stainless steel sliding blocks provide enhanced corrosion resistance for applications exposed to cleaning chemicals or high humidity environments typically found in food processing or pharmaceutical facilities. Heavy-duty connectors are rated for continuous dynamic loading applications with safety factors exceeding 4:1 under normal operating conditions. All connection elements meet industrial safety requirements for mechanical systems with appropriate selection and installation, though specific IP protection ratings vary by component design and application-specific sealing requirements.

What maintenance schedule and service life expectations apply to Bosch Rexroth connection elements?

Bosch Rexroth connection elements require periodic torque verification every 12 months or 2000 operating hours in dynamic applications to maintain specified load ratings and connection integrity. Visual inspection for corrosion, wear, or mechanical damage should occur quarterly, with particular attention to sliding block engagement surfaces and bolt connector threading. Under normal industrial conditions with proper installation, these components typically achieve service lives exceeding 10 years with minimal maintenance requirements. Stainless steel variants demonstrate extended service life in corrosive environments, while zinc-plated components may require replacement every 5-7 years depending on atmospheric exposure conditions and operational cycling frequency.

Connection elements Bosch Rexroth

Basic mechanic elements Bosch Rexroth

Bosch Rexroth Verbindungselemente are the precision-engineered fastening and joining components at the core of every aluminium profile assembly - covering angle brackets, T-slot nuts (M5, M6, M8, M10, M12), connecting bolts, spring-type fasteners, pivot joints, and hinges designed for the Rexroth aluminium structural framing system. Groove widths of 6, 8, 10, and 14 mm are matched exactly, with assembly forces and tightening torques specified per component type (e.g. M8 screw connection preload up to 8 kNm). All elements meet dimensional and material requirements in line with DIN EN ISO 6892 and are RoHS-compliant.

As an authorised distributor of Bosch Rexroth Mechanical Systems, esd.equipment stocks 344 Verbindungselemente references - angle elements, snap-in connectors, pivot joints, T-slot nuts, cover strips, and sealing elements - covering the full range for profile series 20, 30, 40, 45, 60, and 80 mm. Components are supplied with complete Bosch Rexroth part numbers and full dimensional documentation for use in certified assembly and workstation systems.

Key technical advantages - Verbindungselemente Bosch Rexroth at a glance

⚙ Profile series 20-80 mm - compatible with all standard Rexroth groove widths (6, 8, 10, 14 mm)

⚡ M5-M12 fastener range - T-slot nuts, connecting bolts, and angle brackets for full load transmission

🛠 Tool-free snap-in types - quick-assembly spring connectors reduce station build time by up to 40%

🛡 RoHS & DIN EN ISO 6892 - material and dimensional compliance for certified production environments

↕ Pivot joints 0-90° - adjustable angle elements for angled frames, fixtures, and ergonomic structures

✓ 344 references in stock - complete Bosch Rexroth part numbers with full dimensional documentation

Bosch Rexroth Verbindungselemente - Product overview

Element type	Key specification	Profile series	Application
T-slot nuts (standard)	M5, M6, M8, M10, M12 - groove 6/8/10/14 mm	20, 30, 40, 45, 60, 80	Base fastening in profile grooves
Spring-type T-slot nuts	Snap-in, M5-M8, no end-loading required	30, 40, 45, 60	Quick assembly and modification
Angle brackets (standard & heavy)	Die-cast zinc / steel, 30x30 to 80x80 mm	20, 30, 40, 45, 60, 80	90° rigid corner connections
Connecting bolts / screw connectors	M8, M10 - preload force ca. 8 kN	40, 45, 60, 80	Flush butt-end profile connections
Pivot joints	0-90° adjustable, lockable	30, 40, 45, 60	Angled frames, fixture arms
Cover strips & end caps	PVC / PE, groove widths 6-14 mm	20, 30, 40, 45, 60, 80	Profile sealing, edge protection
Hinges	Slot-in, 180° opening angle, zinc die-cast	30, 40, 45	Doors, flaps, access panels
Profile connectors (set)	Incl. T-nut + screw + washer, M6/M8	30, 40, 45, 60	Ready-to-assemble connection kits

Typical applications: Industrial assembly workstations (DIN EN ISO 11228-1), lean manufacturing and line-side flow racks (VDA 6.3), modular machine guarding and safety enclosures (DIN EN ISO 14120), electronics and SMT production fixtures (IPC-A-610, IEC 61340-5-1), automotive body shop jigs (IATF 16949), laboratory and cleanroom equipment frames (ISO 14644), intralogistics and conveyor system structures, ergonomic workstation builds subject to height-adjustment requirements (DIN EN 527-1).

✓

Authorised Bosch Rexroth distributor 344 Verbindungselemente references - original part numbers, full documentation

📦

Stock availability Profile series 20-80 mm - T-nuts, angle brackets, bolts, hinges, covers in stock

🛡

RoHS & DIN EN ISO compliant Dimensional and material certification for use in regulated production environments