E.MC
E.MC - Pneumatic components for automation
E.MC is a manufacturer of pneumatic automation components. The programme ranges from solenoid and process valves through valve terminals with IO-Link to cylinders, compact slides, rotary tables and proportional pressure regulators - building blocks from which complete pneumatic drive and control solutions can be assembled.
The range covers both actuators for motion tasks and components for air preparation and pressure control. E.MC therefore meets typical requirements in factory automation, handling technology and special machinery construction. Ask us when choosing the right size or port variant - we are happy to advise you.
E.MC Bestsellers
E.MC SLP 20 ES 24VAC. 2/2-Way Solenoid Valve G 2", normally closed (NC),24 V AC Eco
View product ->
E.MC SLP 20 ES 12V=. 2/2-Way Solenoid Valve G 2", normally closed (NC),12 V DC Eco
View product ->
E.MC ZS 20 ES 24VAC. 2/2-Way ES Solenoid Valve G 2", 0-6/10 (DC/AC) bar, NC
View product ->
E.MC ZS 20 ES 12V=. 2/2-Way ES Solenoid Valve G 2", 0-6/10 (DC/AC) bar, NC
View product ->
E.MC S1V-M5-16-IO. Valve Terminal 16x5/2-Way, IO-Link, M 5 at valves (top)
View product ->
E.MC S1V-M5-16M-IO. Valve Terminal 16x5/2-Way, IO-Link, M 5 at base plate (side)
View product ->
EMC ELS 25/125-B. Compact Slide, bore 25mm,stroke 125mm, with stroke limitation on both sides (shock absorber)
View product ->
EMC ELS 25/100-B. Compact Slide, bore 25mm,stroke 100mm, with stroke limitation on both sides (shock absorber)
View product ->
E.MC product lines
Solenoid valves & valve terminals
E.MC SLP 20 ES 230V. 2/2-Way Solenoid Valve G 2", normally closed (NC),230 V AC Eco
View product ->
E.MC SLP 20 ES 24V=. 2/2-Way Solenoid Valve G 2", normally closed (NC),24 V DC Eco
View product ->
E.MC ZS 20 ES 230V. 2/2-Way ES Solenoid Valve G 2", 0-6/10 (DC/AC) bar, NC
View product ->
E.MC ZS 20 ES 24V=. 2/2-Way ES Solenoid Valve G 2", 0-6/10 (DC/AC) bar, NC
View product ->
E.MC S1V-M7-16M-IO. Valve Terminal 16x5/2-Way, IO-Link, M 7 at base plate (side)
View product ->
E.MC S1V-M7-16-IO. Valve Terminal 16x5/2-Way, IO-Link, M 7 at valves (top)
View product ->
E.MC S1V-M5-14-IO. Valve Terminal 14x5/2-Way, IO-Link, M 5 at valves (top)
View product ->
E.MC S1V-M5-14M-IO. Valve Terminal 14x5/2-Way, IO-Link, M 5 at base plate (side)
View product ->
Choosing the right E.MC components
Valves and valve terminals
Individual solenoid valves suit simple switching tasks, for example 2/2 way valves in the normally closed (NC) version. Check the port size, operating voltage (e.g. 24 V AC or 12 V DC) and nominal pressure range. In systems with many valves, valve terminals combine several 5/2 way functions and can be integrated into the control system via IO-Link.
Drives: cylinders, slides and rotary tables
The choice follows the motion task:
- Guided and twin piston cylinders for linear, non-rotating movements with a defined force.
- Compact slides for guided short strokes with stroke limitation and shock absorber.
- Rotary tables for turning and indexing tasks in handling.
Bore diameter and stroke length determine force and travel - both are stated in the type designation.
Setting and regulating pressure
Where the working pressure has to be variable or process controlled, proportional pressure regulators are used. They set the output pressure via an analogue input signal (e.g. 4-20 mA) and report the actual value back via an analogue output signal. Check the control range, port size and the type of signal interface.
Which drive suits your task?
| Criterion | Guided cylinder | Compact slide | Rotary table |
|---|---|---|---|
| Motion | Linear, non-rotating | Linear, guided | Rotary / swivel motion |
| Typical task | Feeding, clamping | Short stroke, handling | Turning, positioning |
| Guidance | Plain bearing | Integrated guide | Rotary bearing |
| End position | Depending on version | Stroke limitation with shock absorber | Shock absorber |
| Key parameters | Bore and stroke | Bore and stroke | Size and swivel angle |
| Example type | SGM 63/200 | ELS 25/125-B | EMQ 50 R |
E.MC at a glance
Frequently asked questions about E.MC
Which products does E.MC offer?
E.MC is a manufacturer of pneumatic automation components. The programme comprises solenoid valves and valve terminals, cylinders and guided cylinders, compact slides, rotary tables plus proportional pressure regulators and components for air preparation.
Do the E.MC valve terminals support IO-Link?
Yes. E.MC offers valve terminals with IO-Link connectivity, for example the S1V series with 16 valve positions in 5/2 way design. IO-Link allows digital integration into the plant control system.
What does 'normally closed (NC)' mean on the solenoid valves?
Normally closed (NC) means that the valve is closed when it is not energised and only opens once the operating voltage is applied. If the voltage fails, the valve closes automatically.
How do I select the right cylinder size?
Bore diameter and stroke length are decisive: at a given pressure the bore diameter determines the force, the stroke length the travel. Both values appear in the type designation, for example SGM 63/200 for a 63 mm bore and a 200 mm stroke.
How can I order E.MC components at esd.equipment?
You can enquire about and order E.MC products directly online. For selecting the right size, voltage or port variant and for a quotation on larger quantities you can reach us at shop@esd-equipment.com.
Need advice or a project price?
Our team helps you select the right E.MC components and prepares a quotation for your project.