Reeco ESD Workstation Systems
3D Configurator
Configure your ESD workstation individually – frame, tabletop, accessories, lighting. Online, in real time.
ESD Reeco Workplace Premium - TEC
ESD Workplaces Reeco
The Reeco Premium ESD workbench series delivers a verified surface resistance of 10⁵-10⁹ Ω across laminate working surfaces conforming to IEC 61340-5-1, making it one of the most precisely specified ESD workstation lines available for professional EPA environments. The heavy-gauge steel frame supports working loads up to 150 kg, while the motorized height adjustment spans 720-1,080 mm at a travel speed of 25-40 mm/s - enabling ergonomically compliant workstation setup without tools or manual crank mechanisms.
As a specialist distributor for Reeco ESD solutions, esd.equipment supplies the full Reeco Premium range with verified EPA-compliant system grounding, point-to-point resistance values below 3.5 x 10⁷ Ω, and compliance documentation aligned to DIN EN 61340-5-1 and DIN EN 61340-5-2. The Reeco Premium line is designed for demanding production and laboratory environments where both electrostatic control and operator ergonomics are non-negotiable.
Reeco Premium vs. Standard ESD Workbenches - Technical Comparison
| Criterion | Reeco Premium | Reeco Standard | Generic ESD Bench |
|---|---|---|---|
| Surface resistance | 10⁵-10⁹ Ω (IEC 61340-5-1) | 10⁶-10¹¹ Ω | Varies, often unverified |
| Height adjustment | Motorized 720-1,080 mm | Manual crank, fixed ranges | Fixed or manual pin-lock |
| Load capacity | Up to 150 kg | ca. 100 kg | ca. 60-80 kg |
| Point-to-point resistance | < 3.5 x 10⁷ Ω | Not always specified | Rarely documented |
| Norm certification | DIN EN 61340-5-1 / -5-2 | Partial (surface only) | Self-declared, no audit doc |
| Modular accessories | Full system - no drilling | Limited range | Brand-specific, limited |
| Service life | 10-15 years (tested) | ca. 7-10 years | ca. 3-5 years |
Typical application areas: Electronics manufacturing and SMT assembly (IPC-A-610, IEC 61340-5-1), semiconductor handling and wafer processing (SEMI S1/S2), medical device production (ISO 13485), automotive electronics and ECU assembly (IATF 16949, VDA 6.3), aerospace and defense electronics (AS9100), precision optics and sensor calibration laboratories, R&D and quality inspection workstations requiring documented EPA compliance.
