What are Treston drawer blocks and what industrial applications require these ESD-protected storage systems?

Treston drawer blocks are modular ESD-protected storage cabinets designed for industrial workstations where electrostatic discharge protection is critical. These systems are primarily deployed in electronics manufacturing, semiconductor assembly, precision instrument calibration, and pharmaceutical production environments where sensitive components must be organized and accessed while maintaining EN 61340-5-1 compliance. The blocks feature standardized dimensions of 450x520mm footprint with heights ranging from 660mm to 800mm, accommodating drawer configurations from 5 to 6 compartments with individual load capacities up to 60kg per drawer for heavy tooling and component storage.

What are the key technical selection criteria for choosing between different Treston drawer block configurations?

Selection of Treston drawer blocks depends on drawer height requirements, mobility needs, and load capacity specifications. The 45/56 series offers 700mm total height with 5 drawers at 100mm each, while the 45/66 series provides 800mm height accommodating up to 6 drawers in mixed configurations including 100mm, 150mm, 200mm, and 300mm heights. Mobile versions feature integrated roller systems for repositioning, while stationary models use fixed bases or pedestals. Each drawer supports maximum loads of 50-60kg with 100% extension capability, and all variants maintain RAL 7035 gray finish with integrated ESD protection for surface resistance compliance.

Which international standards and certifications apply to Treston ESD drawer blocks for industrial compliance?

Treston drawer blocks comply with EN 61340-5-1 standard for electrostatic discharge protection in electronics handling environments, ensuring surface resistivity values between 10^6 and 10^9 ohms for controlled static dissipation. The ESD coating meets IEC 61340-4-1 requirements for electrostatic protective workplaces, while the mechanical construction adheres to DIN EN ISO 14001 environmental management standards. Load testing follows EN 15372 specifications for industrial furniture, validating the 60kg per drawer capacity rating. The RAL 7035 powder coating system complies with ISO 12944 corrosion protection standards for industrial environments with moderate chemical exposure.

What are the main differences between Treston 45/56 and 45/66 series drawer block variants?

The Treston 45/56 series features 700mm total height with 5-drawer configurations optimized for compact workstations, while the 45/66 series offers 800mm height accommodating 6 drawers for increased storage density. Model 60649301 in the 45/56 series provides five 100mm drawers, whereas the 45/66 equivalent model 60749301 adds a sixth 100mm drawer within the taller frame. Both series maintain identical 450x520mm footprints and 60kg per drawer load ratings, but the 45/66 variants offer more flexible drawer height combinations including 200mm and 300mm deep compartments for larger components. Mobile versions across both series feature integrated roller systems, while pedestal models provide fixed installation stability.

What installation requirements and system compatibility considerations apply to Treston drawer blocks?

Treston drawer blocks require level flooring with 50kg/m² load capacity for stationary installation, while mobile versions need smooth surfaces for roller operation and adequate clearance for 450mm width positioning. The units integrate directly with Treston workbench systems through standardized 450mm module widths, allowing seamless connection to existing ESD workstation configurations. Electrical ESD grounding connects through integrated grounding points compatible with standard 4mm banana plug earthing systems per EN 61340-5-1 requirements. Mobile variants require 100mm additional clearance behind units for roller access, while pedestal-mounted versions need 40mm floor clearance for cleaning and cable management underneath the base structure.

What safety ratings and operating environment specifications apply to Treston drawer blocks?

Treston drawer blocks operate safely in industrial environments with ambient temperatures from -5°C to +40°C while maintaining ESD surface resistance stability within 10^6 to 10^9 ohm range per EN 61340-5-1. The powder-coated steel construction provides IP20 protection rating against solid objects larger than 12.5mm while the drawer mechanisms feature integrated safety stops preventing complete extraction and potential tipping hazards. Load distribution supports maximum 60kg per drawer with total unit capacity up to 300kg when fully loaded across all compartments. The ESD coating maintains effectiveness at relative humidity levels between 30-70% typical in electronics manufacturing environments, ensuring consistent static dissipation performance throughout operational temperature ranges.

What maintenance schedule and service life expectations apply to Treston industrial drawer blocks?

Treston drawer blocks require quarterly ESD surface resistance testing using calibrated ohmmeter per EN 61340-5-1 to verify continued compliance within 10^6-10^9 ohm specification range. Drawer slide mechanisms need semi-annual lubrication with silicone-free lubricants to maintain smooth 100% extension operation under full 60kg loading. The powder-coated surfaces should undergo annual inspection for coating integrity, with expected service life exceeding 15 years in standard industrial environments when properly maintained. Monthly cleaning with ESD-safe cleaning solutions preserves surface conductivity while drawer weight distribution should be monitored to prevent exceeding individual 60kg compartment limits that could cause premature slide mechanism wear or structural stress.

Drawer units Treston - ESD (antistatic)

ESD Workplaces Treston

Treston drawer units (Schubladenblöcke) are engineered as modular under-bench storage systems designed specifically for ESD-protected workstations. Built on a powder-coated steel frame with surface resistance values of 10⁵-10⁹ Ω on ESD-compliant variants, each drawer block integrates directly into the Treston T-slot column system - allowing tool-free repositioning without compromising EPA grounding continuity. Load ratings of up to 40 kg per drawer and a full-extension ball-bearing runner mechanism ensure reliable access in high-cycle production environments.

As an authorised Treston distributor, esd.equipment supplies the complete range of Treston Schubladenblöcke - from compact 2-drawer pedestals to wide-format 6-drawer cabinets - all conforming to IEC 61340-5-1 EPA workplace requirements and DIN EN 61340-5-2 test protocols. Units are available with or without central locking, in standard and ESD-dissipative surface finishes, and are directly compatible with Treston bench frames in 525 mm, 700 mm, and 850 mm depth configurations.

Key technical advantages - Treston Drawer Units at a glance

⚡ 10⁵-10⁹ Ω surface resistance - ESD-dissipative finish, IEC 61340-5-1 compliant

↕ Full-extension runners - ball-bearing slides, up to 40 kg load per drawer

🛠 Tool-free T-slot integration - mounts directly to Treston column profiles, no drilling required

⚙ Modular drawer count - 2 to 6 drawer configurations, 525/700/850 mm bench depths

🔒 Central locking option - single-key lock secures all drawers simultaneously

✓ DIN EN 61340-5-2 tested - EPA-compatible grounding path, verified system resistance < 3.5 x 10⁷ Ω

Treston Schubladenblöcke - Product Overview

Series / Type	ESD Version	Drawer Count	Load per Drawer	Key Feature
Compact Pedestal	Yes - 10⁵-10⁹ Ω	2 drawers	up to 40 kg	Minimal footprint, fits 525 mm bench depth
Standard Pedestal	Yes - 10⁵-10⁹ Ω	3-4 drawers	up to 40 kg	Central lock, T-slot column mount
Wide-Format Cabinet	Yes - 10⁵-10⁹ Ω	5-6 drawers	up to 40 kg	700/850 mm depth, high-volume component storage
Mobile Drawer Unit	Yes - 10⁵-10⁹ Ω	2-4 drawers	up to 40 kg	Castors with ESD grounding contact, freestanding

Typical application areas: Electronics manufacturing and SMT assembly (IEC 61340-5-1, IPC-A-610), semiconductor handling and wafer processing (SEMI S1/S2), medical device production (ISO 13485), automotive electronics assembly (IATF 16949, VDA 6.3), and aerospace component manufacturing (AS9100D) - wherever EPA-compliant under-bench storage and organised component management are required at ESD-protected workstations.

✓

Authorised Treston Distributor Full Treston drawer unit range - pedestals, cabinets, mobile units

📦

Stock & Fast Delivery Units available from stock - compatible with all Treston bench systems

🛡

IEC 61340-5-1 Compliant EPA-verified surface resistance, DIN EN 61340-5-2 tested grounding path