What are Treston swivel arm accessories and what industrial applications do they serve?

Treston swivel arm accessories are ergonomic workstation components that mount adjustable shelving, tool panels, and equipment trays on articulating arms for flexible positioning at ESD-safe manufacturing workstations. These systems serve electronics assembly, precision manufacturing, quality control laboratories, and technical service environments where operators require frequent access to tools, components, or documentation while maintaining electrostatic discharge protection. The swivel arm design allows 360-degree rotation and height adjustment through gas spring mechanisms, enabling operators to position work surfaces optimally without workspace reconfiguration.

What are the key technical specifications for selecting Treston swivel arm accessories?

Treston swivel arm accessories are available with tray dimensions ranging from 210x460mm for the CKV400 series up to 605x405mm for auxiliary shelves, with load capacities differentiated between standard double arms and heavy-duty arm configurations. The height-adjustable arms feature gas spring mechanisms with 60kg load rating as seen in model 860985-49, while equipment trays like the 92849003P offer 500x250x125mm dimensions with reinforced heavy arm construction. ESD-safe variants carry the -49P designation and include dissipative surface treatments, with adjustable positioning ranges typically spanning 400-800mm vertical travel depending on the specific arm mechanism selected.

What safety standards and certifications apply to Treston swivel arm workstation accessories?

Treston swivel arm accessories comply with EN 61340-5-1 electrostatic discharge control standards when specified with ESD designation, featuring surface resistivity values between 10^6 to 10^9 ohms for controlled static dissipation in electronics manufacturing environments. The mechanical arm assemblies meet DIN EN 14073 workplace safety requirements for adjustable furniture components, while gas spring mechanisms conform to DIN 4550 pressure vessel standards for pneumatic actuation systems. ESD-certified variants undergo periodic verification testing per ANSI/ESD S20.20 protocols to maintain their electrostatic protective properties throughout their operational lifecycle.

What are the differences between single arm, double arm, and heavy arm variants in Treston swivel accessories?

Treston single swivel arms like the CKV400 series support lighter loads up to 15kg and are designed for document holders or small tool panels measuring 210x460mm maximum. Double arm configurations such as the 92849002P equipment tray provide enhanced stability for medium loads up to 25kg with dual pivot points for improved positioning control across 500x250mm work surfaces. Heavy arm variants including the 92849003P model feature reinforced construction supporting loads up to 40kg with larger work surfaces and extended reach capabilities, making them suitable for test equipment or multiple bin storage applications requiring maximum structural integrity.

What are the installation requirements and compatibility specifications for Treston swivel arm systems?

Treston swivel arm accessories mount directly to Treston workbench frames using proprietary 30x30mm square tube connections with spring-loaded positioning pins for tool-free installation and adjustment. The systems require vertical mounting posts with minimum 1200mm height clearance to accommodate full articulation range, while electrical grounding for ESD variants connects through integrated grounding studs accepting 4mm banana plugs or ring terminals. Compatibility extends across all Treston Concept, FlexLine, and MasterLine workbench series, with mounting hardware included for immediate integration into existing workstation configurations without additional structural modifications required.

What safety ratings and environmental specifications apply to Treston swivel arm accessories?

Treston swivel arm accessories operate reliably in industrial environments with temperature ranges from -5°C to +40°C and relative humidity up to 85% non-condensing conditions. The mechanical components carry IP54 ingress protection rating against dust accumulation and water splash, while ESD-safe surfaces maintain their protective properties across this full environmental range. Gas spring mechanisms are rated for 50,000 actuation cycles minimum with nitrogen filling to 150 bar working pressure, and all moving joints feature self-lubricating bearing surfaces designed for maintenance-free operation under continuous industrial use conditions.

What maintenance schedules and inspection requirements are recommended for Treston swivel arm workstation accessories?

Treston swivel arm accessories require quarterly visual inspection of mounting hardware torque specifications and annual verification of ESD surface resistivity using calibrated ohmmeter testing per EN 61340-5-1 protocols. Gas spring mechanisms should be functionally tested every six months for smooth operation and pressure retention, with replacement intervals typically extending 5-7 years under normal industrial usage conditions. The articulating joints and pivot bearings are designed for maintenance-free operation throughout their 10-year service life, though monthly cleaning with approved ESD-safe solvents maintains optimal surface conductivity and prevents contamination buildup that could compromise electrostatic protection effectiveness.

Accessories with a swivel arm Treston - TEC

Treston Accessories

Add to Wish List Add to Compare

Treston 92741001P. Adjustable auxiliary shelf 560x340
€330.86
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Treston CKV400. Swivel arm with tray CKV 210x460
€212.72
Excl. 19% VAT , excl. Shipping Cost

Treston swivel arm accessories are engineered for precision positioning at ESD-safe workstations, delivering 180-360° horizontal rotation with single-handed adjustment and a typical arm reach of 300-700 mm. Mounting systems are compatible with Treston uprights (25 mm and 50 mm profile rails), supporting loads of up to 15 kg per arm - ensuring stable placement of monitors, tool balancers, document holders, and light fixtures within the EPA work zone. All conductive and dissipative contact surfaces meet IEC 61340-5-1 grounding path requirements, keeping the complete assembly within the < 3.5 × 10⁷ Ω system resistance limit.

As an authorised Treston distributor, esd.equipment stocks 29 swivel arm accessory variants ready for immediate dispatch, covering monitor arms, shelf carriers, lamp brackets, and combination holders. Every item is fully integrated into the Treston modular system (DIN EN ISO 11064 ergonomic workstation standard), allowing tool-free reconfiguration as workstation layouts change. Accessories carry Treston's standard product warranty and are individually documented for EPA audit records.

Key technical advantages - Treston Swivel Arm Accessories at a glance

⚙ 180-360° rotation - single-handed horizontal repositioning, lockable at any angle

↕ 300-700 mm reach - adjustable arm extension fits compact and deep workstation layouts

🛠 Up to 15 kg load - robust steel arm with integrated overload protection per DIN EN ISO 11064

⚡ IEC 61340-5-1 compliant - conductive mounting path keeps EPA system resistance < 3.5 × 10⁷ Ω

🔍 25 mm / 50 mm rail fit - universal clamp bracket compatible with all Treston upright profiles

✓ Tool-free reconfiguration - snap-lock collar allows rapid repositioning without dismantling the workstation

Typical application areas: Electronics manufacturing and SMT assembly (IEC 61340-5-1, IPC-A-610), semiconductor production (SEMI S1/S2), medical device assembly (ISO 13485), automotive electronics (IATF 16949, VDA 6.3), aerospace MRO and inspection (AS9100), and laboratory workstations requiring ergonomic tool and display positioning.

✓

Authorised Treston Distributor 29 swivel arm variants - genuine Treston accessories with full product warranty

📦

In-Stock - Ready to Ship Items held in warehouse stock for same- or next-day dispatch to EPA production lines

🛡

EPA-Compliant System Integration All arms documented for IEC 61340-5-1 / IEC 61340-5-2 audit and EPA certification records