What are ESD measurement devices used for?

ESD measurement devices are used to monitor and measure electrostatic discharge to ensure compliance with ESD protection standards.

Why is ESD protection important?

ESD protection is crucial to prevent damage to electronic components and equipment due to electrostatic discharge.

What types of ESD measurement devices are available?

Available ESD measurement devices include electrostatic field meters, resistance meters, and ESD monitoring systems.

How do electrostatic field meters work?

Electrostatic field meters measure the strength of an electric field generated by a charged object to assess ESD risk.

What industries require ESD compliance?

Industries like electronics, aerospace, and manufacturing require ESD compliance to protect sensitive equipment and components.

Can ESD measurement devices prevent static build-up?

ESD measurement devices identify areas with static build-up, allowing for corrective actions to be taken to prevent discharge.

How often should ESD equipment be tested?

ESD equipment should be tested regularly as per industry standards to ensure ongoing protection and compliance.

ESD Measurement Instruments - ESD (antistatic)

ESD Measuring

ESD measuring instruments are the foundation of every compliant EPA (Electrostatic Protected Area): surface resistance meters cover the critical range from 10¹ to 10⁹ Ω, wrist strap testers verify continuous contact resistances below 3.5 x 10⁷ Ω, and electrostatic field meters detect charge potentials from ±1 V up to ±20 kV - all parameters required for certification to IEC 61340-5-1 and ANSI/ESD S20.20. Calibrated test equipment with NIST-traceable measurement accuracy of ±5 % ensures audit-proof documentation across all 44 instruments in this category.

As a specialist distributor for ESD protection technology, esd.equipment stocks handheld meters, bench-top resistance testers, ionisation monitors, combo testers for wrist straps and footwear, as well as data-logging surface resistance kits - sourced from leading manufacturers and fully compliant with DIN EN 61340-5-1, DIN EN 61340-5-2, and IEC 61340-4-1 test procedures.

Key technical advantages - ESD Measuring Instruments at a glance

⚡ 10¹ - 10⁹ Ω measurement range - covers all resistance classes per IEC 61340-5-1

🔍 ±5 % accuracy - NIST-traceable calibration, audit-proof test results

🛠 Combo testers: wrist strap & footwear - single-step EPA entry verification per ANSI/ESD S20.20

⚙ Field meters ±20 kV range - non-contact electrostatic potential measurement at 10-300 mm

📝 Data-logging & USB output - automated documentation for DIN EN 61340-5-2 compliance records

✓ 44 stocked instruments - handheld, bench-top, ionisation monitors - ready to ship

ESD Measuring Instrument Types - technical comparison

Criterion	Surface Resistance Meter	Wrist Strap / Footwear Tester	Electrostatic Field Meter	Ionisation Monitor
Primary measurement	Surface & volume resistance (Ω)	Body / contact resistance (Ω)	Electrostatic potential (V / kV)	Offset voltage & discharge time
Typical range	10¹ - 10⁹ Ω	10³ - 10⁷ Ω	±1 V - ±20 kV	±5 V offset, 0.1-3 s decay
Key standard	IEC 61340-5-1 / IEC 61340-4-1	ANSI/ESD S1.1, S9.1	IEC 61340-5-1 (charge control)	ANSI/ESD SP3.3, IEC 61340-4-7
Test electrodes / probes	Concentric ring or parallel bar	Hand plate + heel plate	Non-contact Faraday probe	Charged plate monitor sensor
Data output	USB / RS-232, data logging	Pass / Fail LED + buzzer	Analogue bar graph + hold	Alarm relay + RS-232
Typical EPA application	Mat, floor, shelf, packaging audit	Personnel entry gate check	PCB / component charge survey	Ioniser balance & decay audit
Form factor	Handheld or bench-top kit	Wall-mount or portable	Handheld, ca. 200 g	Bench-top, continuous duty

Typical application areas: Electronics manufacturing and SMT assembly (IEC 61340-5-1, IPC-A-610), semiconductor fabrication and wafer handling (SEMI E78, SEMI S2), medical device production (ISO 13485, IEC 61340-5-1), automotive electronics and control unit assembly (VDA 6.3, IATF 16949), aerospace and defence manufacturing (AS9100), R&D laboratories requiring traceable resistance and charge measurements (DIN EN 61340-5-2), and EPA audits requiring full compliance documentation across all workstation surfaces, personnel grounding, and ionisation equipment.

✓

IEC 61340-5-1 Compliant All 44 instruments tested and documented to current EPA standards

📦

Ready to ship from stock Handheld meters, combo testers, field meters and ionisation monitors

🔍

NIST-traceable calibration Calibration certificates available - audit-proof for DIN EN 61340-5-2

We can't find products matching the selection.