What are Hakko PCB holders and what industries use them for electronics assembly work?

Hakko PCB holders are precision positioning fixtures designed to secure printed circuit boards during soldering, rework, and assembly operations. These industrial-grade board holders serve electronics manufacturers, repair services, aerospace contractors, and automotive suppliers who require stable component placement during SMD rework operations using hot air stations like the FR 803, FR 810, and FR 811 systems. The holders integrate with professional rework stations to provide anti-static board support while maintaining precise angular positioning for complex multilayer PCB assemblies.

What technical specifications should I consider when selecting Hakko PCB holders for my rework station?

Hakko PCB holder selection depends on your rework station compatibility, with the C 5027 designed specifically for FR 811 systems while C 5029 and C 5028 tripod stands serve FR 803 and FR 810 hot air stations in Type L and Type M configurations respectively. Board support capacity varies from standard PCB dimensions up to larger assemblies requiring the B 5136 board support extension for the C 5027 holder. The C 1390C Omnivise block provides specialized clamping for bottom heating applications with FR 820 and FR 830 preheating systems, offering adjustable grip pressure for delicate substrate handling.

What international standards and certifications apply to Hakko PCB holders in professional electronics assembly?

Hakko PCB holders comply with IEC 61340-5-1 electrostatic discharge control standards for electronics handling environments, ensuring proper ESD protection during component rework operations. The holders meet ISO 9001 manufacturing quality requirements while supporting assembly processes that conform to IPC-A-610 acceptability standards for electronic assemblies. Professional rework operations using these holders typically operate within cleanroom environments meeting ISO 14644-1 cleanliness classifications, with the anti-static materials preventing static discharge damage to sensitive semiconductor components during handling.

What are the differences between Hakko C 5027, C 5028, and C 5029 PCB holder variants?

The Hakko C 5027 PCB holder serves as a dedicated board fixture for FR 811 rework stations with integrated board support and clip mounting system, while the C 5028 and C 5029 represent tripod-style stands for FR 803 and FR 810 hot air systems in Medium and Large configurations respectively. The C 5027 system includes modular components like B 5098 board clips, B 5136 support extensions, and B 5137 rubber feet for stable positioning, whereas the tripod variants provide adjustable height and angle positioning for larger assembly access. The C 1390C Omnivise block offers specialized bottom-heating compatibility with FR 820 and FR 830 preheating stations for thermal profiling applications.

What installation requirements and system compatibility apply to Hakko PCB holders?

Hakko PCB holders require direct mounting compatibility with specific rework station models, with the C 5027 connecting to FR 811 systems through integrated mounting brackets while C 5028 and C 5029 tripods operate as standalone positioning systems for FR 803 and FR 810 stations. Installation involves securing the holder base using the included B 5137 rubber feet for vibration dampening and positioning stability during precision rework operations. The systems require standard laboratory bench space with adequate clearance for board rotation and tool access, typically 600mm x 400mm minimum work area for optimal ergonomic operation and component accessibility.

What safety ratings and operating conditions do Hakko PCB holders support in industrial environments?

Hakko PCB holders operate safely within standard electronics assembly environments at temperatures from 15°C to 35°C with relative humidity below 70% RH to prevent condensation on ESD-sensitive components. The anti-static materials maintain surface resistivity within 10^6 to 10^9 ohms per IEC 61340-5-1 requirements, ensuring safe static discharge protection for Class 1 ESD sensitive devices during handling operations. The mechanical fixtures support board weights up to 2.5kg for the C 5027 system while maintaining positional accuracy within 0.1mm during thermal cycling operations with preheating systems reaching 200°C substrate temperatures.

What maintenance schedule and service life can I expect from Hakko PCB holders in production environments?

Hakko PCB holders require monthly inspection of mechanical joints, clip tension, and rubber foot condition to maintain positioning accuracy within 0.1mm tolerances during continuous production use. The B 5137 rubber feet typically require replacement every 12-18 months in high-volume environments while B 5098 board clips need tension adjustment quarterly to maintain secure PCB retention without substrate damage. Expected service life exceeds 5 years with proper maintenance including annual cleaning with IPA solution and lubrication of pivot points, with replacement indicators including visible wear on contact surfaces or loss of clamping force below specification requirements for safe board retention during rework operations.

Hakko Board Holders - TEC

Hakko Soldering stations

Hakko PCB holders and board holders are precision-engineered work-holding accessories designed to secure printed circuit boards during soldering, rework, and inspection operations. Compatible with Hakko soldering stations including the FM-203, FM-206, and FX-951 series, these holders accommodate PCBs of varying dimensions and orientations - freeing both hands for accurate, controlled soldering. Clip mechanisms and adjustable arm assemblies maintain stable board positioning at angles up to 360 degrees, reducing rework rates caused by board movement during joint formation.

As an authorised distributor for Hakko soldering accessories, esd.equipment stocks 8 Hakko Plattenhalter models available for immediate dispatch. All products are genuine Hakko OEM parts manufactured to ISO 9001 quality standards and are fully compatible with current Hakko station and iron series. Specifications reference Hakko technical data sheets and IPC-A-610 workmanship guidelines for soldering fixture setups.

Key technical advantages - Hakko PCB Holders at a glance

⚙ 360-degree rotation - full board repositioning without re-clamping during rework

↕ Adjustable arm reach - accommodates a wide range of PCB sizes and thicknesses

🛠 OEM Hakko compatibility - designed for FM-203, FM-206, FX-951, and FX-100 stations

🔍 Stable clip grip - spring-loaded clamps hold boards securely per IPC-A-610 fixture recommendations

🛡 ISO 9001 manufacture - genuine Hakko parts, traceable to Hakko quality documentation

✓ 8 models in stock - immediate dispatch, no minimum order quantity required

Hakko PCB Holder - Product overview

Model / Series	Application	Key Specification	Compatibility
Hakko C1390	PCB holding during hand soldering	Rotating clamp, adjustable arm	Universal bench mount
Hakko C1391	SMD rework and inspection	360-degree swivel base	FM-203, FM-206 stations
Hakko C1392	Through-hole and mixed-technology boards	Extended arm, spring-grip clamps	FX-951, FX-100 stations
Additional models	Various soldering and rework tasks	See product detail pages	Hakko station series

Typical applications: Electronics assembly and hand soldering (IPC-A-610, IPC-7711/7721), SMD rework and BGA reballing, through-hole component installation, PCB inspection and quality control (IEC 61191-1), prototyping and R&D laboratories (ISO 9001), repair and maintenance workshops, Automotive electronics production (IATF 16949), and medical device PCB assembly (ISO 13485).

✓

Genuine Hakko OEM Parts Authorised distributor - FM-203, FM-206, FX-951, FX-100 compatible

📦

8 Models - Stock Available Immediate dispatch, no minimum order quantity

🛡

ISO 9001 Quality Assurance Manufactured to Hakko standards - IPC-A-610 workmanship compliance

Add to Wish List Add to Compare

Hakko C5029. Grip fixture L set ( with hexagon wrench and o-ring)
€1,799.30
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Hakko C5028. Grip fixture M set ( with hexagon wrench, o-ring and tray)
€1,623.55
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Hakko C5027. Board Holder
€1,056.69
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Hakko B5136. Board support unit
€501.70
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Hakko C1390C. Omnivise
€74.01
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Hakko B5098. Board clip
€39.05
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Hakko B5137. Rubber foot
€10.07
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Hakko B1752. Conduction plate
€8.65
Excl. 19% VAT , excl. Shipping Cost