What are storage bins and what are their primary industrial applications?

Storage bins are transparent or colored plastic containers designed for systematic small parts organization in manufacturing and warehouse environments. These modular storage solutions enable visual inventory management across automotive assembly lines, electronics manufacturing facilities, and maintenance workshops where technicians require immediate identification of components like fasteners, gaskets, and electronic parts. Industrial storage bins typically feature stackable designs with dividers for category separation and are manufactured from impact-resistant polypropylene or antistatic materials for ESD-sensitive environments.

What are the key technical selection criteria for industrial storage bins?

Industrial storage bin selection depends primarily on dimensional requirements, material compatibility, and load capacity specifications. Standard sizes range from compact 186x400x156 mm units like the Treston 1940-4ESD to larger 310x500x182 mm containers such as the Treston 3050 series, with typical load capacities between 15-25 kg per bin. Critical selection factors include ESD protection requirements for electronics handling, chemical resistance properties, and temperature stability from -20°C to +80°C for diverse industrial environments. Color coding options enable visual sorting systems with clear, grey, red, and blue variants supporting lean manufacturing methodologies.

Which standards and certifications apply to industrial storage bins?

Industrial storage bins must comply with ISO 9001 quality management standards for manufacturing consistency and DIN 55405 specifications for plastic container dimensions and testing requirements. ESD-protective variants like the Treston 1949-4ESD conform to IEC 61340-5-1 electrostatic discharge protection standards with surface resistance values between 10^6 and 10^11 ohms. Food-grade applications require FDA compliance for direct contact with consumables, while automotive sector usage demands adherence to VDA recommendations for parts handling and storage. REACH regulation compliance ensures chemical safety for all polymer materials used in manufacturing.

What are the differences between standard and ESD storage bin variants?

Standard storage bins utilize conventional polypropylene construction in transparent or colored finishes for general industrial applications, while ESD variants incorporate conductive carbon additives creating controlled electrical conductivity for electronics manufacturing. ESD storage bins like the Warmbier 5320.2 maintain surface resistance of 10^6-10^9 ohms and feature black coloration from conductive additives, preventing static charge accumulation that damages sensitive components. Standard bins offer superior chemical resistance and cost advantages for non-electronic applications, whereas ESD versions provide mandatory electrostatic protection in semiconductor fabrication and PCB assembly environments where static discharge can destroy microelectronic devices.

What installation requirements and system compatibility considerations apply to storage bin systems?

Storage bin systems require compatible rack structures with standardized mounting dimensions, such as Treston BR-2530 and BR-4050 stands designed for specific bin series integration. Installation demands level mounting surfaces capable of supporting distributed loads up to 50 kg per linear meter depending on bin configuration and contents weight. System compatibility extends to label holders like Treston E-10, E-15, and E-20 variants that attach directly to bin fronts for inventory identification. Modular designs enable both wall-mounted configurations using standard DIN rail systems and freestanding rack assemblies with adjustable shelf positioning for optimal ergonomic access.

What safety ratings and operating conditions do storage bins meet?

Industrial storage bins typically achieve IP20 ingress protection against solid particles larger than 12.5mm while maintaining structural integrity across operating temperatures from -20°C to +80°C for standard polypropylene construction. ESD variants maintain their conductive properties within the same temperature range with additional humidity tolerance up to 95% relative humidity without condensation. Load safety factors incorporate 3:1 design margins above rated capacity, with standard bins supporting 15-25 kg static loads and dynamic handling loads up to 10 kg during transport. UV stabilization additives prevent material degradation under fluorescent lighting exposure typical in manufacturing environments.

What maintenance schedule and service life expectations apply to storage bins?

Industrial storage bins require monthly visual inspections for crack development, particularly at stress concentration points around mounting tabs and corners where repeated handling creates fatigue loading. ESD storage bins demand quarterly surface resistance testing using calibrated megohmmeters to verify continued compliance with IEC 61340-5-1 conductivity specifications between 10^6-10^11 ohms. Expected service life ranges from 8-12 years under normal industrial conditions with proper UV protection, while chemical exposure or extreme temperature cycling may reduce longevity to 5-7 years. Replacement indicators include visible stress whitening, dimensional changes affecting stackability, or ESD property degradation beyond acceptable resistance thresholds.

Storage bins

Small parts storage

Sichtlagerkästen - also known as open-front storage bins - provide immediate visual access to small parts, components, and fasteners without removing the container from the rack. Standard bin sizes follow the Euro module grid (600 x 400 mm base), with individual bin widths from 50 mm to 300 mm and load capacities typically ranging from 5 kg to 50 kg per unit. Polypropylene construction resists oils, greases, and mild cleaning agents, while ESD-safe variants meet the surface-resistance requirement of 10⁵ - 10⁹ Ω per IEC 61340-5-1 for electrostatic-sensitive component storage.

Our range covers 75 ready-to-ship products across standard polypropylene bins, ESD-safe bins, and matching rack systems - sourced from established manufacturers and fully compliant with DIN EN ISO 2248 stacking-load requirements. Whether you need a compact single-row wall mount or a full Euro-format bulk-storage system, this catalogue provides a direct-fit solution for lean and 5S-compliant workplaces.

Key technical advantages - Sichtlagerkästen at a glance

⚙ Euro module grid 600 x 400 mm - compatible with standard shelving systems (DIN EN ISO 2248)

↕ 50-300 mm bin widths - scalable from single fastener slots to bulk component storage

🛠 Up to 50 kg load per bin - reinforced polypropylene base with ribbed side walls

⚡ ESD variants: 10⁵-10⁹ Ω - surface resistance per IEC 61340-5-1 for EPA-compliant storage

🛡 Oil- and grease-resistant PP - withstands common workshop and production cleaning agents

✓ 5S and lean ready - colour-coded labelling slots, stackable and nestable design standard

Typical application areas: Electronics manufacturing and SMT assembly (IEC 61340-5-1, IPC-A-610), mechanical engineering and maintenance workshops (DIN EN ISO 2248), automotive production and supply logistics (VDA 6.3, IATF 16949), medical device manufacturing (ISO 13485), semiconductor handling and cleanroom preparation (SEMI S1/S2), and lean or 5S warehouse management in general industrial facilities.

✓

75 Products in Stock Standard PP bins, ESD-safe variants, and matching rack systems - ready to ship

📦

Euro Module Compatible 600 x 400 mm base grid fits standard shelving and flow-rack systems

🛡

IEC 61340-5-1 Compliant ESD variants tested to 10⁵-10⁹ Ω - safe for EPA and electrostatic-sensitive assemblies

We can't find products matching the selection.