Non-sparking tools
Handwerkzeuge
- Bahco NSB104-20. Non-sparking 20 mm impact ring wrench made of copper beryllium, 155 mm€130.71Excl. 19% VAT , excl. Shipping Cost
- Bahco NSB104-22. Non-sparking 22 mm impact ring wrench made of copper beryllium, 155 mm€130.71Excl. 19% VAT , excl. Shipping Cost
- Bahco NSB002-20. Non-sparking 20 mm copper beryllium combination wrench, 215 mm€128.67Excl. 19% VAT , excl. Shipping Cost
- Bahco NSB600-200-50. Non-sparking copper beryllium wedge, 50 mmx200 mm€128.67Excl. 19% VAT , excl. Shipping Cost
- Bahco NSB106-24. Non-sparking 3/4" copper beryllium impact box wrench, 145 mm€126.97Excl. 19% VAT , excl. Shipping Cost
- Bahco Nsb600-135-50. Non-sparking copper beryllium wedge, 50 mmx135 mm€125.93Excl. 19% VAT , excl. Shipping Cost
- Bahco NSB234-16-100. Non-sparking 1/2" extension made of copper beryllium, 100 mm€125.31Excl. 19% VAT , excl. Shipping Cost
- Bahco NSB600-200-20. Non-sparking copper beryllium wedge, 20 mmx200 mm€125.22Excl. 19% VAT , excl. Shipping Cost
- Bahco NSB104-19. Non-sparking 19 mm impact ring wrench made of copper beryllium, 145 mm€121.90Excl. 19% VAT , excl. Shipping Cost
- Bahco NSB002-19. Non-sparking 19 mm copper beryllium combination wrench, 215 mm€120.47Excl. 19% VAT , excl. Shipping Cost
- Bahco NSB106-20. Non-sparking 5/8" copper beryllium impact box wrench, 145 mm€118.81Excl. 19% VAT , excl. Shipping Cost
- Bahco NSB002-18. Non-sparking 18 mm copper beryllium combination wrench, 215 mm€117.73Excl. 19% VAT , excl. Shipping Cost
Non-sparking tools are engineered from copper-beryllium (CuBe2, <0.02% ignition risk vs. steel) or aluminum-bronze (CuAl10Fe, hardness 160-200 HB) alloys that eliminate friction sparks even under impact loads up to 500 N. Manufactured to EN 13463-1, ATEX Directive 2014/34/EU, and DIN 57 115, these hand tools are the mandatory choice for Zone 0, Zone 1, and Zone 2 hazardous areas where explosive gas concentrations exceed the lower explosive limit (LEL). Tensile strength of CuBe2 alloys reaches 1,100-1,400 MPa - comparable to hardened tool steel - while remaining fully non-magnetic and non-sparking.
This category covers 639 non-sparking hand tools across 10 product families - from valve keys and socket wrenches to hammers, chisels, pliers, and screwdrivers - all sourced from specialist manufacturers compliant with ATEX, IEC 60079-14, and EN 13463. Whether you operate in oil and gas, petrochemical processing, mining, or explosive-ordnance environments, this range delivers certified Ex-zone protection without sacrificing torque performance or tool longevity.
CuBe2 vs. CuAl10Fe vs. Al-Cu alloy - non-sparking material comparison
| Criterion | CuBe2 (Copper-Beryllium) | CuAl10Fe (Aluminum-Bronze) | Al-Cu Alloy |
|---|---|---|---|
| Tensile strength | 1,100-1,400 MPa | 600-750 MPa | ca. 400 MPa |
| Hardness | 300-400 HB | 160-200 HB | ca. 100 HB |
| Spark-free (EN 13463-1) | Yes - Zone 0/1/2 | Yes - Zone 1/2 | Yes - Zone 2 |
| Non-magnetic | Yes | Yes | Yes |
| Corrosion resistance | Excellent | Very good | Good |
| Typical application | High-torque wrenches, chisels, hammers | Wedges, screwdrivers, pliers | Light-duty tools |
| ATEX compliance | 2014/34/EU, IEC 60079-14 | 2014/34/EU | 2014/34/EU (limited) |
Non-sparking Tools - Product overview by type
| Tool type | Key specification | Material | ATEX zone |
|---|---|---|---|
| Hammers | 250 g-2 kg head weight | CuBe2 / CuAl10Fe | Zone 0/1/2 |
| Wrenches | 6-60 mm, DIN 3110 | CuBe2 | Zone 0/1/2 |
| Socket wrenches | 1/4"-1" drive, up to 340 N·m | CuBe2 | Zone 0/1/2 |
| Screwdrivers | Slotted, PH1-PH3, PZ | CuBe2 tip | Zone 1/2 |
| Pliers | Combination, long-nose, locking | CuBe2 / CuAl10Fe | Zone 1/2 |
| Chisels | 150-300 mm, flat / cross-cut | CuBe2 | Zone 0/1/2 |
| Wedges | Impact-rated, various sizes | CuAl10Fe | Zone 1/2 |
| Side cutters | Up to 4 mm wire capacity | CuBe2 | Zone 1/2 |
Typical application areas: Oil and gas extraction and refinery operations (ATEX 2014/34/EU, IEC 60079-14), petrochemical processing plants (EN 13463-1, DSEAR), offshore platforms and pipeline maintenance (IEC 60079-17), mining and tunneling (TRBS 2153), grain storage and flour milling (DIN EN 14460), ammunition and explosives handling (NATO STANAG 4370), paint booths and solvent-based manufacturing (OSHA 1910.303), chemical plant maintenance (BetrSichV, EN ISO 80079-36)