Wiha Pliers
Wiha Instruments
-
- Wiha Circlip pliers Classic with MagicTips For inner rings (drill holes) (34688)€13.37Excl. 19% VAT , excl. Shipping Cost
- Wiha Circlip pliers Classic with MagicTips For inner rings (drill holes) (34689)€13.37Excl. 19% VAT , excl. Shipping Cost
-
- Wiha Classic needle nose pliers with cutting edge straight shape (26718)€13.35Excl. 19% VAT , excl. Shipping Cost
-
-
-
- Wiha Classic pincers For inner rings (drill holes) (26772)€12.24Excl. 19% VAT , excl. Shipping Cost
-
- Wiha Stripping tool with self-rotating drag blade for ro with cables (44240)€11.83Excl. 19% VAT , excl. Shipping Cost
- Wiha Classic pincers For inner rings (drill holes) (26771)€11.58Excl. 19% VAT , excl. Shipping Cost
-
- Wiha Classic heavy-duty end cutting nippers 1/4" in blister pack (26757)€10.52Excl. 19% VAT , excl. Shipping Cost
- Wiha Craftsman's cutters Standard model made of stainless steel (29420)€10.01Excl. 19% VAT , excl. Shipping Cost
-
-
-
- Wiha Circlip pliers Classic with MagicTips For outer rings (shafts) (36220)€17.28Excl. 19% VAT , excl. Shipping Cost
-
Wiha pliers are engineered to DIN ISO 5742, DIN EN ISO 5746, and DIN EN 60900 (1000 V VDE-insulated versions), delivering jaw hardness values of 58-62 HRC and cutting-edge hardness of 64-67 HRC on diagonal cutters - figures that translate directly into longer service life under daily production loads. Grip handles meet the ergonomic requirements of EN 420 and feature a two-component SoftFinish coating tested for 10,000+ operation cycles without delamination.
As an authorised Wiha distributor, esd.equipment stocks 222 pliers across the full Wiha range - from MagicTip needle-nose and ComfortGrip combination pliers through 1000 V insulated VDE sets to ESD-safe variants with surface resistance 10⁶-10⁹ Ω per IEC 61340-5-1. Every tool ships with Wiha's original quality documentation and factory finish.
Wiha Pliers - Product Series Overview
| Series / Type | Key Feature | Sizes available | Primary norm |
|---|---|---|---|
| Combination pliers (ComfortGrip) | SoftFinish, induction-hardened jaws 58-62 HRC | 160 / 180 / 200 mm | DIN EN ISO 5746 |
| Diagonal cutter | Cutting edge 64-67 HRC, flush/bevel cut | 115 / 130 / 160 mm | DIN ISO 5742 |
| Needle-nose pliers (MagicTip) | Precision tip, cross-hatched gripping zone | 150 / 180 / 200 mm | DIN EN ISO 5745 |
| VDE insulated pliers set | 1000 V rated, dual-layer orange/yellow sleeve | 3-piece / 5-piece sets | DIN EN 60900 |
| ESD pliers | R: 10⁶-10⁹ Ω, dissipative handle | 130 / 150 / 160 mm | IEC 61340-5-1 |
| Circlip pliers (internal/external) | Straight and angled tips, shaft dia. 8-85 mm | 170 / 225 mm | DIN 5254 |
| Water pump / pipe pliers | Multi-position adjustment, jaw opening ca. 45 mm | 250 / 300 mm | DIN EN 22770 |
Typical applications: Electronics assembly and PCB rework (IPC-A-610, IEC 61340-5-1 EPA zones), electrical installation and switchgear (DIN EN 60900, VDE 0105-100), automotive production and maintenance (VDA 6.3, IATF 16949), precision mechanical assembly in medical device manufacturing (ISO 13485), semiconductor and cleanroom handling (SEMI S1/S2), general industrial maintenance and MRO operations.