The product may differ from the illustration
Festo drive motor for precise, dynamic motion tasks in automation technology.
Motor Controller CMMP-AS-C5-3A-M0 - Festo 1622902
FESTO Original product
Net price (excl. VAT)
€1,798.01
Item FES-1622902
Manufacturer no. CMMP-AS-C5-3A-M0
Personal expert advice
Brand new Specialist dealer since 2009 Original product Worldwide shipping
Product data
Manufacturer no.CMMP-AS-C5-3A-M0
EAN4052568243258
Customs tariff number85044085
ConditionNew
Article
FES-1622902
Frequently Bought Together
- This Item: €1,798.01
- Motor Controller CMMP-AS-C10-11A-P3-M3 - Festo 1501328 €3,151.48
- Control Block CPX-CEC-M1-V3 - Festo 3472765 €1,155.21
Total price
Festo drive motor for precise, dynamic motion tasks in automation technology. The key technical data of this genuine Festo article are listed below.
| Fastening type | on connection plate<br>Permanently screwed |
| Product weight [g] | 2.200 |
| Display | Seven segment display |
| Permission | RCM mark<br>c UL us - Listed (OL) |
| CE certificate (see declaration of conformity) | acc. to EU-EMV Directive<br>acc. to EU Machine Directive<br>acc. to EU Low voltage Directive<br>acc. to EU-RoHS Directive |
| Bearing temperature [°C] | -25 to 70 |
| ambient temperature [°C] | 0 to 40 |
| Relative humidity | 0 - 90 % |
| Protection category | IP10<br>IP20 |
| Degree of contamination | 2 |
| Material information | LABS containing materials included<br>RoHs compliant |
| Phase nominal operating voltage | 1-phase |
| Nominal operating voltage AC [V] | 230 |
| Permitted voltage oscillations | ± 10 % |
| Network frequency [Hz] | 50 to 60 |
| Nominal current [A] | 4 to 6 |
| Network filter | integrated |
| Max. intermediate circuit voltage DC [V] | 320 |
| Braking resistance [Ohm] | 60 |
| Impulse power braking resistance [kVA] | 2,8 |
| Nominal voltage logic supply DC [V] | 24 |
| Permitted range logic voltage | ± 20 % |
| Power input logic supply without parking brake [A] | 0,65 |
| Output voltage range AC | 3x 0 - 270 V |
| Nominal output current [A] | 5,0 |
| Nominal current per phase, effective [A] | 5,0 |
| Peak current per phase, effective [A] | 10 |
| Max. peak current duration [s] | 5 |
| Nominal performance controller [VA] | 1.000 |
| Peak performance [VA] | 2.000 |
| Output frequency [Hz] | 0 to 1000 |
| Parameterising interface | USB<br>Ethernet<br>Parameterising and commissioning |
| Fieldbus coupling | CANopen<br>Modbus/TCP |
| Communication profile | DS301/DSP402 |
| Process coupling | I/O coupling<br>for 256 mobile sets |
| Max. fieldbus transfer rate [Mbit/s] | 1 |
| Bus connector | Sub-D<br>9 pin<br>Plug |
| Encoder output interface, properties | Resolution 16384 ppr |
| Encoder output interface, function | Actual value feedback via encoder signals for speed control mode<br>Target value for downstream switched slave actuator |
| Encoder input interface, properties | EnDat<br>HIPERFACE<br>RS422<br>SINCOS<br>3 phase encoder signals |
| Encoder input interface, function | In synchronous mode as a speed preset of the slave actuator<br>Encoder signal target speed value |
| Quantity digital logic inputs | 10 |
| Properties logic inputs | Freely configurable<br>Galvanically separated |
| Work area logic input [V] | 8 to 30 |
| Quantity digital logic outputs 24 V DC | 5 |
| Properties digital logic outputs | Galvanically separated<br>Partially freely configurable |
| Max. current digital logic outputs [mA] | 100 |
| Quantity analogue target value inputs | 2 |
| Properties target value inputs | Differential inputs<br>Configurable for speed<br>Configurable for current |
| Work area target value input | ± 10 V |
| Impedance target value input [kOhm] | 20 |
| Quantity analogue monitor outputs | 2 |
| Work area monitor outputs | ± 10 V |
| Resolution monitor outputs [Bit] | 9 |
| Properties monitor outputs | Short circuit proof |
| Certified awarding point | 01/205/5162.02/19<br>TÜV Rheinland |
| Active PFC | yes |
| Safety function | Safe switched off torque (STO)<br>Safe stop 1 (SS1) |
| Safety Integrity Level (SIL) | Safe switched off torque (STO) / SIL 3 / SILCL 3 |
| Performance Level (PL) | Safe switched off torque (STO) / category 4 performance level e |
| Diagnose degree of coverage [%] | 97 |
| SFF Safe Failure Fraction [%] | 99,17 |
| Hardware error tolerance | 1 |
| Proof test interval [A] | 20 |
| Manufacturer Nr. | CMMP-AS-C5-3A-M0 |
|---|---|
| Manufacturer | Festo |
| EAN | 4052568243258 |
| Weight | 2.200000 |
| HS-Code | 85044085 |
| GPSR manufacturer information | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Article authenticity | Original product |
| Condition of article | New |
| Schutzart | IP10 |
Write Your Own Review
Customers Who Bought This Item Also Bought
Related Products
Check items to add to the cart or
