The product may differ from the illustration
Festo pneumatic cylinder for precise linear motion and defined force in automation.
Integrated Drive EMCA-EC-67-M-1TM-EP - Festo 8061204
FESTO
Original product
Net price (excl. VAT)
€1,360.96
Excl. 19% VAT ,
excl. Shipping Cost
Available
Fast shipping
Item
FES-8061204
Manufacturer no.
EMCA-EC-67-M-1TM-EP
Personal expert advice
Brand new
Specialist dealer since 2009
Original product
Worldwide shipping
Product data
Manufacturer no.EMCA-EC-67-M-1TM-EP
EAN4052568290771
Customs tariff number85013100
ConditionNew
Article
FES-8061204
Frequently Bought Together
-
This Item:
€1,360.96Excl. 19% VAT , excl. Shipping Cost
-
Integrated Drive EMCA-EC-67-S-1TE-DIO - Festo 8061196
€1,069.81Excl. 19% VAT , excl. Shipping Cost
-
Integrated Drive EMCA-EC-67-M-1TE-EP - Festo 8061202
€1,205.92Excl. 19% VAT , excl. Shipping Cost
Total price
Festo pneumatic cylinder for precise linear motion and defined force in automation. The key technical data of this genuine Festo article are listed below.
| Operating mode controller | PWN, MOSFET power end level<br>P position controller<br>Cascade controller with<br>PI speed controller<br>Proportional and integral controller for current |
| Rotor position transducer | Encoder absolut multi turn |
| Rotor position transducer measurement principle | Magnetic |
| Protection function | I²t monitoring<br>Drag error monitoring<br>Software endpoint detection<br>Voltage blackout detection<br>Current monitoring<br>Temperature monitoring |
| Safety function | Safe switched off torque (STO) |
| Safety Integrity Level (SIL) | Safe switched off torque (STO) / SIL 2 |
| Performance Level (PL) | Safe Torque off (STO) / category 3, Performance Level d |
| Display | LED |
| Max. speed [1/min] | 3.300 |
| Nominal rotational speed [1/min] | 3.150 |
| Braking resistance, external [Ohm] | 6 |
| Diagnose degree of coverage [%] | 90 |
| Properties digital logic outputs | Partially freely configurable<br>Not galvanically separated |
| Hardware error tolerance | 1 |
| Max. current digital logic outputs [mA] | 100 |
| Max. positive test impulse at 0 signal [µs] | 10.000 |
| Max. negative test impulse for 1 signal [µs] | 600 |
| Nominal performance motor [W] | 150 |
| Nominal voltage DC [V] | 24 |
| Nominal current [A] | 7,2 |
| Parameterising interface | Ethernet |
| Report | Ethernet / IP |
| SFF Safe Failure Fraction [%] | > 90 % |
| Max. number of movement sets | 64 |
| Rotor position transducer resolution [Bit] | 12 |
| Peak performance motor [W] | 200 |
| Peak current [A] | 10,3 |
| Permitted voltage oscillations | ± 20 % |
| Permission | RCM mark<br>c UL us - Recognized (OL) |
| KC-mark | KC-EMV |
| Certified awarding point | TÜV 01/205/5514.00/16<br>UL E331130 |
| CE certificate (see declaration of conformity) | to EU EMC directive<br>to EU machinery directive |
| Oscillation strength | Transport use test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with degree of severity 2 to FN 942017-5 and EN 60068-2-27 |
| Bearing temperature [°C] | -25 to 70 |
| Relative humidity | 0 - 95 %<br>Not condensing |
| Protection category | IP54 |
| ambient temperature [°C] | 0 to 50 |
| Information about ambient temperature | Above an ambient temperature of 20 °C, a power reduction of 1.75 % per °C. |
| Mass inertia Rotor [kg/cm²] | 0,301 |
| Nominal torque [Nm] | 0,45 |
| Peak torque [Nm] | 0,91 |
| Permitted axial shaft loading [N] | 60 |
| Permitted radial shaft loading [N] | 100 |
| Probability of Failure per Hour in [1/h]. | 1e-009 |
| PED (Probability of failure on demand) | 1.86e-005 |
| Proof test interval [A] | 20 |
| Product weight [g] | 2.285 |
| Quantity digital logic outputs 24 V DC | 2 |
| Quantity digital logic inputs | 2 |
| Communication profile | FHPP |
| Logic input specification | Depending on IEC 61131-2 |
| Work area logic input [V] | 24 |
| Properties logic inputs | Galvanically connected with logic potential |
| Ethernet supported protocols | TCP/IP |
| Switching logic inputs | PNP (Positive switching) |
| Switching logic outputs | PNP (Positive switching) |
| Fastening type | With throughway bores<br>Permanently screwed |
| Material information | LABS containing materials included<br>RoHs compliant |
| Operating duration absolute value encoder | mit externer Batterie: 6 Monate<br>ohne externe Batterie: 3 - 7 Tage |
| Manufacturer Nr. | EMCA-EC-67-M-1TM-EP |
|---|---|
| Manufacturer | Festo |
| EAN | 4052568290771 |
| Weight | 2.285000 |
| HS-Code | 85013100 |
| GPSR manufacturer information | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Article authenticity | Original product |
| Condition of article | New |
| Schutzart | IP54 |
Write Your Own Review
Customers Who Bought This Item Also Bought
Related Products
Check items to add to the cart or