What are Bosch Rexroth VarioFlow Plus tools and what industrial applications do they serve?
Bosch Rexroth VarioFlow Plus tools are specialized assembly and maintenance implements designed exclusively for the VarioFlow Plus chain conveyor system used in automated production lines. These tools include bending tools (Biegewerkzeug), roller sets for profile cutting, drilling fixtures, and mounting equipment that enable precise installation and servicing of conveyor components. Primary applications span automotive assembly lines, electronics manufacturing, packaging operations, and general industrial automation where continuous material flow requires specialized tooling for system modifications and maintenance.
What are the key technical selection criteria for Bosch Rexroth VarioFlow Plus tools?
Selection of VarioFlow Plus tools depends on the specific profile dimensions being worked with, such as the 17x14 SF-PROFIL or 11x20 KPL profiles that require corresponding roller sets like the 3842529236 or 3842532259. Critical factors include tool compatibility with sliding rail systems requiring specialized cutting shears (3842547982) or drilling fixtures (3842553518), safety clutch integration capabilities, and the precision requirements for profile bending operations. Tool selection must also consider the conveyor's operational speed and the frequency of profile modifications or maintenance interventions required in the specific application.
Which international standards and certifications apply to Bosch Rexroth VarioFlow Plus tools?
Bosch Rexroth VarioFlow Plus tools comply with ISO 9001 quality management standards and meet DIN EN ISO 12100 machinery safety requirements for industrial tooling applications. The tools are manufactured according to European machinery directive 2006/42/EC standards and incorporate CE marking for European market compliance. For automated production environments, these tools align with ISO 13849 safety-related parts of control systems standards, ensuring proper integration with safety systems including emergency stops and protective barriers commonly required in conveyor applications.
What are the main differences between VarioFlow Plus tool variants like roller sets and mounting tools?
Roller sets such as the SF-PROFIL 17.3x13.5 (3842538773) and VF-S side guidance profile rollers (3842533921) are dimensionally specific cutting tools for different aluminum profile cross-sections, while mounting tools like the sliding rail assembly tool (3842549738) focus on mechanical installation operations. Cutting tools including the VFPlus sliding rail shear (3842547982) provide clean profile cuts, whereas drilling fixtures (3842553518) enable precise hole positioning for mounting brackets. Bending tools (3842528531) allow controlled profile deformation, and safety clutch tools (3842549388) specifically service the conveyor's overload protection mechanisms.
What are the installation requirements and system compatibility for VarioFlow Plus tools?
VarioFlow Plus tools require compatibility with Bosch Rexroth aluminum profile systems using T-slot connections and standardized fastening elements according to DIN 6912 socket head cap screws. Installation demands access to compressed air supply at 6 bar operating pressure for pneumatic tools, and electrical connections meeting IP54 protection class for automated tool changers. The tools integrate with existing VarioFlow Plus conveyor frames through standardized mounting interfaces and require clearance zones of minimum 500mm for safe operation during profile cutting or bending operations.
What safety ratings and operating parameters apply to Bosch Rexroth VarioFlow Plus tools?
VarioFlow Plus tools operate within temperature ranges of -10°C to +60°C ambient conditions and maintain IP54 protection rating against dust ingress and water splashing in industrial environments. The tools incorporate Category 2 safety functions according to ISO 13849-1 with emergency stop integration and require operating pressures not exceeding 10 bar for pneumatic variants. Safety features include guarded cutting zones, two-hand operation controls for high-risk operations, and automatic tool retraction mechanisms that activate when conveyor motion is detected during maintenance operations.
What maintenance schedules and service life expectations apply to VarioFlow Plus tools?
Bosch Rexroth VarioFlow Plus tools require monthly visual inspections for wear on cutting edges and roller surfaces, with detailed maintenance intervals of 2000 operating hours for mechanical components and 5000 hours for pneumatic actuators. Tool service life typically ranges from 50,000 to 100,000 cutting cycles depending on aluminum profile hardness and cutting frequency, with roller sets requiring replacement when dimensional tolerances exceed ±0.1mm. Critical wear points include cutting blades that must maintain sharpness within 0.05mm edge tolerance, and pneumatic seals requiring annual replacement in high-duty applications to maintain 6 bar operating pressure.
Tools Bosch Rexroth - ESD (antistatic)
Chain conveyor system Bosch Rexroth VarioFlow plus
Bosch Rexroth VarioFlow+ tooling components are precision-engineered for chain conveyor assembly and maintenance, with dimensional tolerances held to DIN ISO 286 fit standards. The VarioFlow+ system operates at chain speeds up to 0.5 m/s and supports pallet loads up to 50 kg - these dedicated tools ensure correct installation torques, chain tensioning, and track alignment without improvised substitutes that risk mis-assembly or conveyor downtime.
As an authorised Bosch Rexroth distributor, esd.equipment stocks 9 genuine VarioFlow+ assembly and maintenance tools compatible with the 2000, 2010, and 2040 conveyor series. Each item ships from central warehouse stock and is referenced against the official Bosch Rexroth material number catalogue to guarantee cross-compatibility within the modular VarioFlow+ platform (IEC 62061 machine safety guideline-ready).
Key technical advantages - Bosch Rexroth VarioFlow+ Tools at a glance
⚙ VarioFlow+ 2000/2010/2040 - genuine OEM tools for all three standard conveyor series
🛠 Correct installation torques - prevents chain wear and mis-tensioning per Bosch Rexroth assembly spec
🔍 DIN ISO 286 fit tolerances - precision-matched to track profiles for accurate alignment
📦 9 articles in stock - ships same day from central warehouse, genuine Rexroth part numbers
✓ Cross-series compatibility - single tool set covers width variants 65 mm and 90 mm tracks
Typical application areas:
Automotive body and powertrain assembly lines (VDA 6.3, IATF 16949), electronics and PCB sub-assembly conveyor systems (IPC-A-610, IEC 61340-5-1), medical device manufacturing flow lines (ISO 13485), intralogistics and end-of-line packaging (DIN EN ISO 9001), and aerospace component assembly workstations (AS9100).
✓
Genuine Bosch Rexroth OEM ToolsOfficial material numbers - VarioFlow+ 2000, 2010 & 2040 series
📦
In-Stock & Fast Dispatch9 articles available from central warehouse stock
This website uses cookies to improve your experience. By clicking “Accept”, you consent to the use of ALL the cookies. However you may visit Cookie Settings to provide a controlled consent.
