What are Treston chair casters and gliders used for in industrial workplaces?

Treston chair casters and gliders are specialized mobility components designed for ESD workstations and industrial seating systems in electronics manufacturing, cleanrooms, and quality control environments. These components enable smooth chair movement across different floor surfaces while maintaining electrostatic discharge protection critical for sensitive electronic component handling. The 100mm diameter caster sets like the Treston 860429-00 provide optimal load distribution for concept workbenches and multi-purpose trolleys, while glider sets offer stationary stability for high work chairs in precision assembly tasks.

How do I select the correct caster type based on floor surface hardness?

Caster selection depends on floor surface characteristics with soft casters designed for hard floors and hard casters for soft surfaces to ensure optimal rolling performance and floor protection. The Treston CSCAS series features soft casters rated for hard concrete or epoxy floors, while the CHCAS series uses hard polyurethane wheels for carpeted or vinyl surfaces. Stop&Go casters like the CSTOP series incorporate dual-action braking mechanisms that engage automatically when the chair is unoccupied, preventing unwanted movement during precision work operations.

What ESD standards apply to Treston chair casters and gliders?

Treston ESD casters and gliders comply with IEC 61340-5-1 standard for electrostatic discharge control in electronics manufacturing environments, maintaining surface resistance values between 10^6 and 10^9 ohms. The ESD variants including CSCAS-ESD, CHCAS-ESD, and CGLIH-ESD feature conductive materials that provide continuous grounding path through the chair frame to dissipate static charges safely. These components meet DIN EN 100015 requirements for antistatic properties essential in semiconductor assembly, PCB manufacturing, and electronic component inspection applications.

What are the differences between Stop&Go casters and standard rolling casters?

Stop&Go casters feature automatic braking mechanisms that engage when the chair is unoccupied, preventing unwanted movement during precision work, while standard casters provide continuous free-rolling motion. The Treston CSTOP and CSTOP-ESD series incorporate pressure-sensitive brake systems that release when weight is applied and automatically lock when the operator stands up. Standard rolling casters like the CSCAS and CHCAS series offer unrestricted 360-degree movement suitable for frequent repositioning tasks, with 5-piece sets providing complete chair base replacement for optimal load distribution across industrial work environments.

What installation requirements apply to Treston chair casters and glider systems?

Treston casters and gliders utilize standard 11mm stem diameter connections compatible with most industrial chair bases, requiring simple push-in installation without additional tools or modifications. The 5-piece caster sets provide complete replacement for standard star base configurations, while glider sets replace existing casters for stationary applications requiring enhanced stability. ESD variants require continuous electrical connection through conductive chair components to maintain proper grounding, with installation verification using standard resistance measurement equipment to confirm values below 10^9 ohms from seat to floor contact point.

What are the load ratings and operating temperature ranges for Treston chair components?

Treston chair casters support maximum loads up to 120kg per set with individual wheel ratings of 25kg for 100mm diameter configurations, ensuring stable operation under typical industrial seating applications. Operating temperature range spans -10°C to +40°C for standard environments, with ESD variants maintaining electrical properties across this thermal range without degradation. The polyurethane wheel materials provide impact resistance ratings suitable for concrete floor surfaces while maintaining rolling smoothness, with steel ball bearing assemblies rated for continuous operation under dynamic loading conditions typical in manufacturing environments.

What maintenance intervals and inspection requirements apply to industrial chair casters?

Treston chair casters require monthly visual inspection for wheel wear, bearing smoothness, and stem connection integrity, with quarterly cleaning using isopropyl alcohol to maintain ESD properties on conductive variants. Service life typically ranges 3-5 years under normal industrial use conditions, with replacement indicated when wheel diameter reduces below 95mm or rolling resistance increases significantly. ESD casters need annual resistance testing using standard ohmmeter measurement from chair seat to ground contact point, ensuring values remain within 10^6 to 10^9 ohm range for continued electrostatic discharge protection in sensitive electronic manufacturing environments.

Castor and glider Treston - TEC

Treston Accessories

Add to Wish List Add to Compare

Treston 834734-00. Castor set 100 mm for workbenches
€85.70
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Treston CSTOP. Soft Stop&Go castor set for hard floors
€77.45
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Treston CSCAS. Soft castor set for hard floors
€38.71
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Treston CHCAS. Hard castor set for soft floors
€38.14
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Treston CGLIH. High glide set
€33.71
Excl. 19% VAT , excl. Shipping Cost

Treston casters and glides are engineered specifically for ESD-compliant workstation chairs and stools, delivering surface resistance values in the 10⁵-10⁹ Ω range in accordance with IEC 61340-5-1. Hard-floor casters (polyamide, 65 mm wheel diameter) and soft-floor variants (polyurethane, 50-65 mm) are available as direct replacement sets of 5, rated for static loads up to 125 kg per chair base - matching the structural load limits of Treston ESD seating series.

As an authorised distributor of Treston accessories, esd.equipment stocks 10 ready-to-ship caster and glide configurations compatible with the full Treston chair portfolio. Every item ships as a verified OEM-matched set, ensuring correct stem diameter (11 mm twin-wheel stem) and uninterrupted ESD continuity from operator to EPA earth point per DIN EN 61340-5-1.

Key technical advantages - Treston Casters & Glides at a glance

⚡ 10⁵-10⁹ Ω surface resistance - continuous ESD discharge per IEC 61340-5-1

↕ 50-65 mm wheel diameter - hard-floor and soft-floor variants available

🛠 Set of 5 per pack - OEM-matched 11 mm twin-wheel stem, tool-free swap

⚙ Up to 125 kg load rating - matches full Treston ESD chair base specification

🛡 DIN EN 61340-5-1 compliant - verified EPA continuity from operator to ground

✓ Polyamide and polyurethane options - correct material per floor type, no ESD gap

Typical application areas: Electronics manufacturing and SMT assembly lines (IEC 61340-5-1, IPC-A-610), semiconductor cleanroom workstations (SEMI S1/S2), medical device production (ISO 13485), automotive electronics assembly (IATF 16949, VDA 6.3), and aerospace MRO facilities (AS9100) - wherever ESD-safe operator seating must maintain continuous discharge paths to the EPA ground system.

✓

OEM-Verified Treston Accessories Correct stem fit and ESD continuity for all Treston ESD chair series

📦

10 Configurations in Stock Hard-floor, soft-floor and glide sets - ready for immediate dispatch

🛡

IEC 61340-5-1 Compliant Every set maintains EPA grounding continuity - no ESD protection gap