ESD Floor Matting - ESD (antistatic)

ESD floor mats deliver a controlled surface resistance of 10⁵-10⁹ Ω (per IEC 61340-4-1 / DIN EN 61340-5-1), dissipating electrostatic charges to ground at a rate that protects components with sensitivity thresholds below 100 V HBM. Two-layer rubber and vinyl constructions typically measure 3-4 mm total thickness, with a conductive bottom layer resistance of < 10⁶ Ω and a dissipative top surface of 10⁶-10⁹ Ω - keeping charge decay times under 2 seconds in standard EPA conditions (20-30% RH, 23 °C).

As a specialized ESD distributor, esd.equipment offers 62 floor mat products from leading manufacturers including Wearwell, Transforming Technologies, SCS, and Notrax - covering roll goods from 0.9 m to 1.2 m width, custom-cut tiles, and pre-configured workstation runners. All listed products are verified against IEC 61340-4-1, EN 61340-5-1, and ANSI/ESD S7.1 floor mat standards, and are suitable for use in certified EPA (Electrostatic Protected Area) installations.

ESD Floor Mat types - technical comparison

Typical applications: Electronics assembly and SMT lines (IEC 61340-5-1, IPC-A-610), semiconductor wafer handling and cleanroom bays (SEMI S1/S2, SEMI E187), medical device manufacturing (ISO 13485), automotive ECU and sensor assembly (IATF 16949, VDA 6.3), aerospace avionics production (AS9100D), PCB rework and inspection stations (IPC-7711/7721), laboratory benches and test & measurement areas (EN 61340-5-2)