What are Bosch Rexroth gripper containers and what industrial applications use them?

Bosch Rexroth gripper containers are modular storage and handling systems designed for organised material flow in industrial assembly environments. These containers integrate seamlessly with Bosch Rexroth's aluminium profile systems to create flexible workplace solutions for automotive manufacturing, electronics assembly, packaging operations, and general industrial production lines. The gripper containers feature standardised dimensions like 180x90mm and 90x90mm profiles with material chute functionality, enabling efficient part presentation and inventory management at assembly stations. Their modular design allows rapid reconfiguration of workstation layouts to accommodate changing production requirements.

What are the key technical selection criteria for Bosch Rexroth gripper containers?

Selection of Bosch Rexroth gripper containers depends on container profile dimensions, material compatibility, and mounting configuration requirements. The system offers profile sizes including 180x90mm, 90x90mm, and 90x45mm variants with standard lengths of 1500mm and 3000mm for material chutes. ESD-compatible versions like the Greifbehaelter VG 180X90 ESD (part 3842558327) provide electrostatic discharge protection critical for electronics handling applications. Base pedestals such as the SG-180 KPL and SG-90 KPL models support different container sizes, while the 15x30mm hanging profiles (3842554156) enable flexible mounting options within existing profile frameworks.

What standards and certifications apply to Bosch Rexroth gripper container systems?

Bosch Rexroth gripper containers comply with ISO 9001 quality management standards and DIN EN 61340 electrostatic discharge protection requirements for ESD-designated variants. The aluminium profile construction meets DIN EN 755 specifications for extruded aluminium alloys, ensuring consistent mechanical properties and dimensional tolerances. ESD-protected models achieve surface resistance values between 10^6 and 10^9 ohms per IEC 61340-5-1 standards, making them suitable for handling static-sensitive electronic components. The modular connection system follows ISO 4762 specifications for socket head cap screws and T-slot compatibility standards used throughout industrial automation applications.

What are the differences between standard and ESD variants of Bosch Rexroth gripper containers?

Standard Bosch Rexroth gripper containers use conventional aluminium profiles and polymer components optimised for general industrial applications, while ESD variants incorporate conductive materials to prevent electrostatic discharge buildup. The ESD models like Greifbehaelter VG 180X90 ESD feature surface resistivity values compliant with IEC 61340 standards, typically achieving 10^6 to 10^9 ohm resistance ranges. ESD base pedestals such as the Sockel SG-180 KPL ESD maintain electrical continuity throughout the system, requiring proper grounding connections to facility earth systems. Visual identification typically includes ESD labeling and may feature distinctive coloring to prevent mixing with standard components in electronics manufacturing environments.

What are the installation requirements for Bosch Rexroth gripper container systems?

Bosch Rexroth gripper containers install directly into standard 30x30mm or 40x40mm aluminium profile frameworks using T-slot connections and M8 fasteners per DIN 912 specifications. The base pedestals require stable mounting surfaces capable of supporting loaded container weights plus dynamic forces from material handling operations. ESD variants demand electrical continuity through grounding straps connected to facility earth systems with resistance below 1 megohm as specified in IEC 61340-5-1. Installation templates like the Bohrschablone GRIPPER PAN (part 3842546854) ensure precise positioning and hole patterns, while the modular design permits field reconfiguration without specialised tooling or permanent structural modifications.

What safety ratings and operating conditions apply to Bosch Rexroth gripper containers?

Bosch Rexroth gripper containers operate reliably in industrial environments with ambient temperatures from -10°C to +60°C and relative humidity up to 85% non-condensing conditions. The aluminium profile construction provides IP20 protection against solid objects larger than 12mm diameter, suitable for indoor industrial applications but requiring additional protection in harsh environments. Load capacity varies by container size and mounting configuration, with typical working loads ranging from 20kg to 50kg per container depending on profile dimensions and support structure. The anodised aluminium surfaces resist corrosion and wear while maintaining dimensional stability across temperature cycles, ensuring consistent performance in demanding production environments.

What maintenance and inspection requirements apply to Bosch Rexroth gripper container systems?

Bosch Rexroth gripper containers require minimal maintenance beyond periodic inspection of T-slot connections and cleaning of material contact surfaces every 6 months under normal industrial conditions. ESD variants need quarterly verification of grounding continuity using megohm meters to ensure resistance values remain below IEC 61340-5-1 specifications of 1x10^9 ohms maximum. The aluminium profile construction typically provides 15-20 years service life in standard industrial environments, with replacement indicators including visible wear on sliding surfaces, loose T-slot connections, or compromised ESD properties. Annual torque verification of M8 mounting fasteners to 25 Nm ensures structural integrity, while damaged components can be individually replaced without system-wide replacement requirements.

Grab Containers Bosch Rexroth - TEC

Assembly Technology Bosch Rexroth

Bosch Rexroth Greifbehälter (grip containers) are engineered for lean assembly workstations and flow-rack systems, delivering precise parts presentation with standardised bin dimensions compatible with TS 2plus and TS 5 transfer systems. Tote dimensions follow the European small-load carrier grid (300 x 200 mm and 400 x 300 mm base footprints), with wall thickness tolerances held to <0.5 mm for reliable stacking and chuting. Load capacities range from 5 kg to 25 kg per bin, and the polypropylene body meets the mechanical requirements of VDI 3596 for ergonomic parts feeding.

As an authorised distributor for Bosch Rexroth assembly technology, esd.equipment stocks 63 Greifbehälter variants - including smooth-front, open-front, and sloped-front designs - ready for immediate dispatch. All containers integrate directly into Bosch Rexroth flow-rack and kanban systems and comply with DIN EN ISO 9001-certified supply-chain requirements for traceability in automotive and electronics manufacturing.

Key technical advantages - Bosch Rexroth Greifbehälter at a glance

⚙ Standardised grid dimensions - 300 x 200 mm and 400 x 300 mm base formats, fully compatible with Bosch Rexroth TS 2plus and TS 5 transfer systems

🛡 Load capacity up to 25 kg - polypropylene construction with ribbed sidewalls for high static and dynamic load resistance

↕ Multiple front-opening styles - smooth-front, open-front, and sloped-front variants for ergonomic parts picking at all workstation heights

⚡ Stackable & nestable design - wall thickness tolerance <0.5 mm ensures secure stacking in automated chute and flow-rack applications

🔍 63 variants in stock - full Bosch Rexroth Greifbehälter range available for immediate dispatch, no minimum order quantity

✓ Norm-compliant supply chain - compatible with VDI 3596 ergonomic feeding guidelines and DIN EN ISO 9001 traceability requirements

Bosch Rexroth Greifbehälter - Product overview

Type	Application	Base dimension	Max. load	Key feature
Smooth-front bin	Flow rack, kanban shelf	300 x 200 mm	10 kg	Label window, stackable
Open-front bin	Assembly workstation picking	400 x 300 mm	25 kg	Full-width opening, ribbed base
Sloped-front bin	Ergonomic lean workstation	300 x 200 mm	10 kg	Angled front, VDI 3596 ergonomics
Deep-body bin	Bulk small-parts storage	400 x 300 mm	25 kg	Increased height, nestable
Divider-compatible bin	Multi-SKU sorting & sequencing	300 x 200 mm	5 kg	Accepts standard Rexroth inserts
TS system carrier	TS 2plus / TS 5 conveyor integration	400 x 300 mm	ca. 20 kg	Anti-slip base, transfer-line proven

Typical applications: Electronics assembly and SMT line feeding (IPC-A-610, IEC 61340-5-1), automotive body-in-white and powertrain assembly (VDA 6.3, IATF 16949), medical device manufacturing (ISO 13485), semiconductor back-end packaging (SEMI S2), lean manufacturing and kanban replenishment systems (VDI 3596), aerospace sub-assembly kitting (AS9100).

✓

Authorised Bosch Rexroth Distributor Full Greifbehälter range - 63 variants, genuine OEM parts with full traceability

📦

In-Stock, Ready to Ship Same-day dispatch on standard bin sizes - 300 x 200 mm and 400 x 300 mm formats

🛡

System-Compatible Design Direct integration with TS 2plus, TS 5 and VarioFlow+ - no adapter required

Add to Wish List Add to Compare

Bosch Rexroth 3842993073-1000. Profil, 180X90 MATERIAL CHUTE. 1000 mm
€162.28
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Bosch Rexroth 3842993072-1000. Profil, 90X90 MATERIAL CHUTE. 1000 mm
€116.93
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Bosch Rexroth 3842993071-1000. Profil, 90X45 MATERIAL CHUTE. 1000 mm
€87.02
Excl. 19% VAT , excl. Shipping Cost