Quick
Root Catalog
Quick - soldering and rework equipment for electronics production
Quick is a manufacturer of equipment for professional electronics production and the repair bench. The range spans digital soldering stations and hot-air rework stations, preheating systems and reflow ovens, through to solder-fume extraction, ionization and soldering robots.
At esd.equipment you get the Quick range for B2B use - built for ESD-safe work, with digital temperature control and matching accessories. We advise you on choosing the right station for your production or service workflow.
Quick best sellers
4-axis soldering robot 200W with 2 tables, 500x400x100 mm - Quick 9594FYA-A
View product ->
4-axis soldering robot 200W, work area 400x400x100 mm - Quick 9494F-A
View product ->
Re-balling reflow oven 1600W, 50-300°C, sensor-controlled - Quick 3000
View product ->
Preheating plate with aluminium top and LCD 800W, 50-300°C - Quick 870D
View product ->
2-Arm-Lötrauchfiltersystem 250 W, 2x 100 m³/h, 3-stufige Filtration mit Aktivkohle - Quick 6102A2
View product ->
PCB holder for circuit boards - Quick 855T
View product ->
Preheating plate with aluminium top 800W, 50-300°C, digital - Quick 870
View product ->
Infrared heat plate with ceramic emitter 400W, 50-350°C - Quick 854
View product ->
Quick product lines
Soldering stations
Industrial hot-air soldering station 1300W ESD, 100-500°C, 6-70 L/min - Quick TR1300A
View product ->
Digital ESD 3-channel soldering station 150W, 200-480°C - Quick TS2300
View product ->
Hot-air rework station digital 1000W ESD, 100-500°C, 1-60 L/min - Quick 861DW
View product ->
Digital ESD LCD industrial soldering station 150W, 100-500°C - Quick TS8
View product ->
Digital soldering station 90W with automatic solder-wire feed, 50-600°C - Quick 376D10
View product ->
Hot-air rework station digital 120W, 100-450°C, 0.3-6.8 L/min - Quick 860DA
View product ->
Industrial soldering station 120W ESD with rapid cartridge tips and PC connection - Quick TS1200
View product ->
2-in-1 digital rework station 1350W, hot air to 500°C, 70W iron - Quick 709D+
View product ->
Choosing the right Quick station
Hand soldering or hot-air rework?
For classic soldering on through-hole and larger SMD parts, a soldering station with a controlled tip is enough. As soon as fine SMD parts, multi-pin chips or BGA are involved, a hot-air rework station is the better choice because it heats the part evenly and without contact.
Why preheat?
Modern boards conduct heat away strongly. A preheating plate or infrared heat plate brings the assembly to a base temperature, lowers thermal stress and makes removing and fitting large parts easier. For re-balling and BGA work, a reflow oven supports a controlled temperature profile.
Do not forget workplace safety
Soldering produces fumes. Fume extraction with multi-stage filtration and activated carbon keeps the workplace clean. Dissipative stations and, where needed, an ionizing blower ensure ESD safety.
- Soldering station for spot work
- Hot-air rework for SMD and BGA
- Preheating for large assemblies
- Extraction and ionization at the bench
Which equipment group fits?
| Criterion | Soldering station | Hot-air rework | Preheating system |
|---|---|---|---|
| Heat delivery | Tip on the part | Hot air, contactless | Broad base heat |
| Typical task | Soldering and touch-up | SMD and BGA rework | Preheating the board |
| Part size | Through-hole to mid SMD | Fine SMD to BGA | Whole assembly |
| ESD version | Available | Available | Available |
| Temperature control | Digital, per channel | Air flow and temperature | Digital, LCD |
| Complement | Fume extraction | Preheating recommended | Reflow oven |
Quick at a glance
Frequently asked questions about Quick
What products does Quick make?
Quick manufactures equipment for electronics production and repair: digital soldering stations, hot-air rework stations, preheating plates and reflow ovens, solder-fume extraction, ESD ionization and multi-axis soldering robots.
Are Quick stations ESD-safe?
Many Quick stations are dissipative (ESD) by design and are therefore suitable for handling electrostatically sensitive components in professional production.
When do I need a hot-air rework station instead of a soldering station?
A soldering station is suited to spot soldering work with the tip. As soon as fine SMD parts, multi-pin chips or BGA are removed or placed, a hot-air rework station is preferable because it heats the part evenly and without contact.
What is a preheating plate for?
A preheating plate brings the board to a base temperature. This reduces thermal stress, compensates for the heat conduction of large boards and makes removing and fitting large components easier.
Can I buy Quick equipment through esd.equipment with advice?
Yes. esd.equipment carries the Quick range for B2B use. For a professional quote or selection advice, contact us at shop@esd-equipment.com.
Need advice or a professional quote?
We help you select the right Quick equipment for production, lab and service and prepare an individual quote for you.
