What is soldering fume extraction and what are its primary industrial applications?

Soldering fume extraction systems are specialized industrial ventilation units designed to capture and filter harmful particulates and gases generated during soldering processes. These systems serve electronics manufacturing facilities, PCB assembly lines, repair workshops, and cleanroom environments where flux vapors, lead particles, and rosin-based contaminants must be removed to protect worker health and maintain product quality. Weller's Zero Smog series and MG series units provide localized extraction at individual workstations or centralized systems supporting up to 8 workstations simultaneously, ensuring compliance with occupational exposure limits for electronics production environments.

What are the key technical selection criteria for industrial soldering fume extractors?

Selection of soldering fume extraction systems depends on airflow capacity, filtration efficiency, and workstation coverage requirements. Weller's Zero Smog 4V models handle single workstations with focused extraction through nozzles or funnels, while Zero Smog 6V units support up to 8 workstations for larger production lines. The MG 100S and MG 140 series offer higher extraction volumes with cleanroom-grade filtration for sensitive environments. Power requirements range from 230V/50Hz for standard units to 400V configurations for high-capacity Laser Line LL systems, with extraction methods varying between ducted central systems and self-contained units with integral filtration.

Which international standards and certifications apply to industrial soldering fume extraction systems?

Industrial soldering fume extraction systems must comply with ISO 14644 cleanroom standards for particle filtration efficiency and EN 1093 workplace atmosphere requirements for hazardous substance removal. IEC 61010 electrical safety standards govern power supply design and grounding requirements, while ATEX directives may apply in explosive atmosphere environments where solvent-based fluxes create vapor hazards. Weller systems incorporate cleanroom-compatible filtration meeting ISO Class requirements and electrical safety certifications ensuring safe operation in industrial electronics manufacturing environments where EMC compatibility per EN 61326 prevents interference with sensitive test equipment.

What are the differences between Weller's main soldering fume extraction product variants?

Weller's extraction systems divide into three main categories with distinct capabilities and applications. The Zero Smog series includes 4V models for single workstations with kit options for either nozzle or funnel extraction, 6V units supporting multiple workstations, and 20T models for heavy-duty applications. The MG series features the MG 100S for compact installations and MG 140 with enhanced cleanroom filtration for sensitive environments. Laser Line LL systems handle specialized laser processing fumes with 150V, 200V, and 400V power configurations, providing higher extraction volumes for industrial laser soldering and cutting applications requiring dedicated fume management.

What are the installation requirements and system compatibility options for soldering fume extractors?

Soldering fume extraction installation requires 230V/50Hz single-phase power for most units, with 400V three-phase supply needed for high-capacity Laser Line systems. Weller CBC-A cabinet systems feature 160mm ducting connections for integration with central building extraction networks, while Zero Smog units operate as standalone systems with integral filtration requiring only electrical connection. ESD-safe versions ensure compatibility with static-sensitive electronics environments, and multiple units can share centralized ducting systems using the CBC-A cabinet configuration. Workstation integration utilizes flexible extraction arms with nozzle or funnel attachments positioned 150-300mm from soldering points for optimal capture efficiency.

What safety ratings and environmental operating parameters apply to industrial fume extraction systems?

Industrial soldering fume extraction systems typically operate within ambient temperatures of 5-40°C with relative humidity limits of 80% non-condensing per IEC 60068 environmental testing standards. Weller systems maintain IP20 ingress protection ratings suitable for indoor industrial environments while providing ESD-safe operation for electronics manufacturing applications. Electrical safety ratings include Class I grounding requirements and compliance with low voltage directive EN 61010 for laboratory and industrial equipment. Filtration efficiency meets HEPA standards removing 99.97% of particles above 0.3 micrometers, with activated carbon stages capturing flux vapors and organic compounds generated during soldering processes.

What maintenance schedules and service life expectations apply to soldering fume extraction systems?

Soldering fume extraction systems require filter replacement every 6-12 months depending on usage intensity and contamination levels, with pre-filters changed more frequently in high-volume production environments. Weller systems incorporate filter monitoring indicators showing replacement timing based on pressure differential across filtration stages. Motor assemblies typically provide 8,000-15,000 operating hours before bearing replacement, while extraction fans require annual inspection of impeller balance and housing integrity. Regular maintenance includes quarterly cleaning of extraction arms and nozzles, annual electrical safety testing per IEC 61010 requirements, and airflow verification using calibrated anemometers to ensure capture velocities remain above 0.5 m/s at workstation level for effective fume removal.

Weller Solder Fume Extraction

Fume Extractions

Add to Wish List Add to Compare

Weller T0053638699N. Solder fume extraction unit, WFE P
€1,184.67
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Weller FT91014699N. Extraction unit for fine dust Zero Smog TL with gas filter
€1,085.95
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Weller FT91013699N. Extraction unit soldering fume Zero Smog TL
€1,065.65
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Weller FT91012699N. Solder fume extractor, Zero Smog EL Kit 1
€854.72
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Weller FT91010699N. Solder fume extractor, Zero Smog EL 230V F/G
€779.75
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Weller T0053640299N. Solder fume extraction unit, WFE
€713.00
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Weller 100-2003-ESDN. Compact filter for MG 100 / MG 100S / MG 80S / WFE 2X: Particle filter H13 and wide band gas filter, MEK
€637.21
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Weller 100-2012-ESDN. Compact filter: Particle filter H13 and wide band gas filter, Solvent / VOC, for MG 100, MG 100S, WFE 2X
€577.38
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Weller 145-2003-ESDN. Compact filter: Particle filter H13 and wide band gas filter, MEK
€563.82
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

WELLER 145-2002-ESDN. Compact filter for MG 140 clean room
€563.82
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

WELLER 112-0000-ESDN. Solder fume extractor, FT 12
€557.43
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

WELLER 100-2002-ESDN. Gas filter, clean room filter for MG100S, WFE 2X
€554.82
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Weller T0058735835. Broadband gas filter for adhesive vapors, for Zero Smog 6V / Zero Smog 20T / WFE 4S
€549.82
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Weller 145-2012-ESDN. Compact filter: Particle filter H13 and wide band gas filter, Solvents / VOC
€534.50
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Weller 950-2000-ESDN. Particle filter H13 and gas filter for MG95
€530.51
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Weller 750-2002-ESDN. Particle Filter H13 and gas filter for MG75, Cleanroom
€509.83
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Weller FT-4402N. 1 joint double suction arm, Easy Click 60, aluminium
€500.59
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Weller T0053657999N. Kit 1S, bevelled nozzle, 2-joint arm
€500.59
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Weller T0058735838. Compact filter for WFE4S, WFE20D, Zero Smog 6V, Zero Smog 20T
€500.59
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Weller 145-2000-ESDN. Compact filter for MG 140
€466.69
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Weller FT91000010. Compact Filter Laser Line 400V
€454.72
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Weller 750-2000-ESDN. Particle filter H13 and gas filter for MG75
€444.75
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Weller FT-3470N. 1 joint suction arm for wall mounting, Easy-Click 60
€434.86
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Weller T0058762763N. Kit 1S WF, 1 articulated arm with funnel nozzle
€391.90
Excl. 19% VAT , excl. Shipping Cost

Weller solder fume extractors capture airborne flux fumes and particulates at the source, with filtration efficiencies reaching 99.97% for particles >0.3 μm via HEPA-grade filter stages. Units in this range deliver airflow volumes from 7 m³/h on compact single-station models up to 60 m³/h on multi-station systems, maintaining residual noise levels as low as 48 dB(A) during continuous operation. Pre-filter, main filter, and activated-carbon stages comply with DIN EN ISO 21904 and IEC 62841 requirements for workplace fume control at soldering stations.

As an authorised distributor for Weller, esd.equipment stocks 106 solder fume extraction products - including benchtop extractors, zero-smog filter units, and replacement filter sets - all verified against current EU workplace-safety directives (2017/745/EU, TRGS 900) and ready for immediate dispatch.

Key technical advantages - Weller Solder Fume Extraction at a glance

⚡ 99.97% filtration efficiency - HEPA-grade main filter for particles >0.3 μm

↕ 7-60 m³/h airflow - scalable from single bench to multi-station lines

🛠 3-stage filtration - pre-filter + HEPA + activated-carbon layer for flux gases

⚙ from 48 dB(A) - low-noise operation suited to open-plan production areas

🛡 DIN EN ISO 21904 compliant - meets EU workplace fume-control requirements

✓ 106 products in stock - extractors, zero-smog units & OEM replacement filters

Weller Solder Fume Extractors - Product Overview

Series / Model	Application	Airflow / Power	Key Feature
Zero-Smog EL	Single-station benchtop extraction	ca. 7 m³/h	Ultra-compact, 48 dB(A), flex arm
Zero-Smog TL	Single- to dual-station extraction	ca. 15 m³/h	3-stage filter, activated carbon
Zero-Smog 4V	Multi-station production lines	ca. 60 m³/h	Up to 4 extraction arms, HEPA H14
WFE Replacement Filters	OEM filter maintenance sets	-	Pre-filter, HEPA, carbon - all stages
Accessories & Arm Kits	Flexible extraction arms, nozzles	-	360° adjustable, 500-1000 mm reach

Typical application areas: Electronics manufacturing and SMT rework (IPC-J-STD-001, IEC 61340-5-1), semiconductor and wafer-level assembly (SEMI S8), medical device production (ISO 13485, IEC 62841), automotive electronics and control-unit assembly (IATF 16949, VDA 6.3), aerospace and defence soldering (AS9100D), R&D laboratories and repair benches (TRGS 900, EN ISO 21904).

✓

Authorised Weller Distributor Genuine Weller extractors and OEM filters - 106 products available

📦

In-Stock & Fast Dispatch Benchtop units, multi-station systems and replacement filters ex-stock

🛡

Norm-Compliant Filtration DIN EN ISO 21904, IEC 62841, TRGS 900 - workplace fume safety confirmed