€74,806.00
Excl. 19% VAT ,
excl. Shipping Cost
Article
FL-LZFF-25/800
Manufacturer Nr.
LZFF 25/800
Kolbenstangenloser Zylinder, Kolben Ø 25 mm, Hub 800 mm
Frequently Bought Together
-
This Item:
€74,806.00Excl. 19% VAT , excl. Shipping Cost
-
LZF 25/300. Kolbenstangenloser Zylinder, Kolben 25 mm, Hub 300 mm
€60,476.00Excl. 19% VAT , excl. Shipping Cost
-
LZFF 18/600. Kolbenstangenloser Zylinder, Kolben 18 mm, Hub 600 mm
€64,046.00Excl. 19% VAT , excl. Shipping Cost
Total price
Construction type:
Rodless cylinder with direct force reduction through the pipe-slit on the yoke, both sides with adjustable end position damping, can be swapped with many other manufacturers
Materials:
Cylinder tubes, cylinder heads and drive rollers: anodized aluminium, seals: NBR / PUR, masking tape: Stainless steel
Temperature range:
-20 to +80 °C
Operating pressure:
max. 8 bar
Stroke:
at will up to 6,000 mm
Installation position:
arbitrarily, however, preferably yoke downward to avoid soiling.
Compressed air connection:
both sides (anytime by removing closing plugs on one side or below, or combinations thereof can be reconstructed)
Version:
With Magnetic piston
Cylinder switch type:
D, A (Ø 18: D or A in combination with fastening AB2)
Rodless cylinder with direct force reduction through the pipe-slit on the yoke, both sides with adjustable end position damping, can be swapped with many other manufacturers
Materials:
Cylinder tubes, cylinder heads and drive rollers: anodized aluminium, seals: NBR / PUR, masking tape: Stainless steel
Temperature range:
-20 to +80 °C
Operating pressure:
max. 8 bar
Stroke:
at will up to 6,000 mm
Installation position:
arbitrarily, however, preferably yoke downward to avoid soiling.
Compressed air connection:
both sides (anytime by removing closing plugs on one side or below, or combinations thereof can be reconstructed)
Version:
With Magnetic piston
Cylinder switch type:
D, A (Ø 18: D or A in combination with fastening AB2)
| Piston diameter [mm] | 25 |
| Stroke [mm] | 800 |
| Version | with double sliding guide for large loads |
| D (compressed air port) | G 1/8" |
| Repair sets (with all wear parts) | LZ 25/2500 REP |
| Repair sets (only damping ring and grooved ring) | LZ 25 REP |
| lateral force permissible [N] | 875 |
| A [mm] | 100 |
| A1 [mm] | 67,5 |
| AF [mm] | 70 |
| AF1 [mm] | 19 |
| AM [mm] | 13 |
| B [mm] | 45 |
| E [mm] | 131 |
| E1 [mm] | 66 |
| F [mm] | 100 |
| F1 [mm] | 35 |
| G [mm] | 50 |
| J [mm] | 3,5 |
| M [mm] | 20,0 |
| MF [mm] | 66 |
| N | M 4 |
| N1 [mm] | 7,0 |
| O [mm] | 4,5 |
| OP [mm] | 4,4 |
| S [mm] | 33,0 |
| T | M 4 |
| T1 [mm] | 9 |
| U [mm] | 42 |
| W [mm] | 53,0 |
| WF [mm] | 64 |
| Damper length [mm] | 18 |
| Manufacturer Nr. | LZFF 25/800 |
|---|---|
| Manufacturer | Fluidics equipment |
| EAN | 4050571819781 |
| Weight | 34.000000 |
| HS-Code | 84123100 |
| Article authenticity | Original product |
| Condition of article | New |
Write Your Own Review
Customers Who Bought This Item Also Bought










