€73,117.00
Excl. 19% VAT ,
excl. Shipping Cost
Article
FL-LZF-40/200
Manufacturer Nr.
LZF 40/200
Kolbenstangenloser Zylinder, Kolben Ø 40 mm, Hub 200 mm
Frequently Bought Together
-
This Item:
€73,117.00Excl. 19% VAT , excl. Shipping Cost
-
LZ 32/1400. Kolbenstangenloser Zylinder, Kolben 32 mm, Hub 1400 mm
€4,856.00Excl. 19% VAT , excl. Shipping Cost
-
LZ 25/500. Kolbenstangenloser Zylinder, Kolben 25 mm, Hub 500 mm
€32,497.00Excl. 19% VAT , excl. Shipping Cost
Total price
Construction type:
Rodless cylinder with direct force reduction through the pipe-slit on the yoke, both sides with adjustable end position damping, can be swapped with many other manufacturers
Materials:
Cylinder tubes, cylinder heads and drive rollers: anodized aluminium, seals: NBR / PUR, masking tape: Stainless steel
Temperature range:
-20 to +80 °C
Operating pressure:
max. 8 bar
Stroke:
at will up to 6,000 mm
Installation position:
arbitrarily, however, preferably yoke downward to avoid soiling.
Compressed air connection:
both sides (anytime by removing closing plugs on one side or below, or combinations thereof can be reconstructed)
Version:
With Magnetic piston
Cylinder switch type:
D, A (Ø 18: D or A in combination with fastening AB2)
Rodless cylinder with direct force reduction through the pipe-slit on the yoke, both sides with adjustable end position damping, can be swapped with many other manufacturers
Materials:
Cylinder tubes, cylinder heads and drive rollers: anodized aluminium, seals: NBR / PUR, masking tape: Stainless steel
Temperature range:
-20 to +80 °C
Operating pressure:
max. 8 bar
Stroke:
at will up to 6,000 mm
Installation position:
arbitrarily, however, preferably yoke downward to avoid soiling.
Compressed air connection:
both sides (anytime by removing closing plugs on one side or below, or combinations thereof can be reconstructed)
Version:
With Magnetic piston
Cylinder switch type:
D, A (Ø 18: D or A in combination with fastening AB2)
| Piston diameter [mm] | 40 |
| Stroke [mm] | 200 |
| Version | with sliding guide |
| D (compressed air port) | G 1/4" |
| Repair sets (with all wear parts) | LZ 40/2500 REP |
| Repair sets (only damping ring and grooved ring) | LZ 40 REP |
| lateral force permissible [N] | 1150 |
| A [mm] | 150 |
| A1 [mm] | 95,0 |
| AF [mm] | 140 |
| AF1 [mm] | 50 |
| AM [mm] | 22 |
| B [mm] | 70 |
| E [mm] | 220 |
| E1 [mm] | 110 |
| F [mm] | 180 |
| F1 [mm] | 70 |
| G [mm] | 90 |
| J [mm] | 5,0 |
| M [mm] | 33,0 |
| MF [mm] | 97 |
| N | M 6 |
| N1 [mm] | 10,0 |
| O [mm] | 7,0 |
| OP [mm] | 6,8 |
| S [mm] | 51,0 |
| T | M 6 |
| T1 [mm] | 12 |
| U [mm] | 63 |
| W [mm] | 79,0 |
| WF [mm] | 95 |
| Damper length [mm] | 34 |
| Manufacturer Nr. | LZF 40/200 |
|---|---|
| Manufacturer | Fluidics equipment |
| EAN | 4050571819118 |
| Weight | 1.000000 |
| HS-Code | 84123100 |
| Article authenticity | Original product |
| Condition of article | New |
Write Your Own Review
Customers Who Bought This Item Also Bought










