What are Ersa solder fume extraction systems and where are they primarily used in industrial applications?

Ersa solder fume extraction systems are specialized ventilation units designed to capture and filter hazardous fumes generated during electronic soldering operations. These systems incorporate advanced filtration technology to remove particulates, flux vapors, and other contaminants at the source before they can be inhaled by operators. Primary applications include electronics manufacturing facilities, PCB assembly lines, repair workshops, and research laboratories where lead-based or lead-free soldering creates airborne pollutants. The systems are essential for maintaining workplace air quality standards in industries ranging from automotive electronics to medical device manufacturing where precision soldering is performed regularly.

What are the key technical specifications to consider when selecting Ersa fume extraction equipment?

Critical selection parameters for Ersa fume extraction systems include extraction arm reach with models like the Omniflex offering 600mm working radius and Highflex providing 500mm coverage for different workstation configurations. Filter capacity and type are essential considerations, with the EA110 requiring micro/gas filters (3CA06-1001) while the EA55i uses combination filters (3CA09-1001) for different contamination levels. Airflow rates, noise levels, and power consumption vary between compact units like EASY ARM 1 (0CA10-001) and higher-capacity EASY ARM 2 (0CA10-002) systems. Table mounting options include clamp-style holders (3CA10-9002) and feed-through installations (0CA10-4005) depending on workstation design requirements.

Which international standards and certifications apply to professional solder fume extraction systems?

Professional solder fume extraction systems must comply with ISO 45001 occupational health and safety management standards along with EN 14175 for laboratory fume extraction equipment performance requirements. IEC 61010-2-061 specifies safety requirements for laboratory equipment used in potentially explosive atmospheres when handling certain flux chemistries. European machinery directive compliance under EN ISO 12100 ensures proper risk assessment and safety integration for automated soldering environments. Additionally, filtration efficiency must meet EN 1822 HEPA filter standards for particulate removal, while activated carbon components follow EN 12915 guidelines for gas-phase contaminant adsorption in industrial ventilation applications.

How do the different Ersa EASY ARM extraction models compare in terms of capabilities and applications?

The Ersa EASY ARM 1 (0CA10-001) represents the entry-level single-position extraction solution suitable for individual workstations with moderate soldering volumes and basic filtration requirements. The EASY ARM 2 (0CA10-002) provides enhanced filtration capacity and typically supports multiple extraction points or higher-volume operations requiring more robust contaminant removal. Both systems accept interchangeable extraction arms (0CA10-4001 through 0CA10-4004) but differ in filter housing size, motor capacity, and airflow rates. The modular design allows operators to configure systems with various arm lengths including 500mm Highflex (290763) or 600mm Omniflex (291405) options depending on workstation geometry and reach requirements.

What installation requirements and system compatibility considerations apply to Ersa fume extraction units?

Ersa fume extraction systems require stable workbench mounting through either table clamp assemblies (3CA10-9002) or permanent table feed-through installations (0CA10-4005) depending on workspace configuration and mobility requirements. Electrical connections typically require standard 230V AC power with appropriate circuit protection, while some models include standby switches (0CA09-3005) for energy management integration. The modular extraction arms feature articulated joints allowing 360-degree positioning within their specified reach radius, with replacement arms like the 500mm Highflex (3CA10-4001) maintaining compatibility across system generations. Ducted installations may require additional ventilation connections, though most units operate as self-contained filtration systems with internal fan assemblies and replaceable filter cartridges.

What safety ratings and environmental operating specifications do Ersa extraction systems maintain?

Ersa solder fume extraction systems typically operate within ambient temperature ranges of 10°C to 40°C with relative humidity limits of 80% non-condensing to ensure reliable filtration performance and electronic component longevity. While specific IP ratings vary by model, the systems incorporate appropriate ingress protection for workshop environments where flux splatter and cleaning solvents may be present. Electrical safety compliance includes low-voltage operation with appropriate grounding requirements and thermal protection for continuous-duty motor operation. Sound levels generally remain below 55 dB(A) during normal operation to maintain acceptable workplace noise exposure, with variable speed controls allowing operators to balance extraction efficiency against acoustic comfort in sensitive environments.

What maintenance schedules and service intervals are required for optimal Ersa fume extraction performance?

Ersa fume extraction systems require regular filter replacement intervals ranging from 3-6 months depending on soldering volume and contaminant types, with combination filters (3CA09-1001) for the EA55i and micro/gas filters (3CA06-1001) for the EA110 having different service life expectations. Weekly visual inspections of extraction arm positioning, joint movement, and airflow indicator readings help identify performance degradation before critical failure occurs. Annual professional service should include motor bearing lubrication, electrical connection inspection, and calibration of airflow sensors to maintain extraction efficiency within design specifications. Filter saturation indicators where present should trigger replacement regardless of time intervals, as overloaded filtration media can create dangerous back-pressure conditions affecting overall system performance and operator protection levels.

Ersa Solder Fume Extraction

Fume Extractions

Ersa soldering fume extraction systems remove airborne flux residues, rosin vapors, and fine particulates directly at the point of emission - achieving filtration efficiencies of up to 99.97% for particles >0.3 µm via multi-stage HEPA/activated-carbon filter combinations. Units cover extraction volumes from compact single-station arms (approx. 150 m³/h) up to central extraction systems for multi-station SMT lines, with noise levels as low as 48 dB(A) in continuous operation. All Ersa extraction devices are designed to meet workplace air quality requirements per TRGS 900 and BGR 121, and are compatible with Ersa i-CON, METCAL, and third-party soldering stations.

As an authorized Ersa distributor, esd.equipment offers 34 extraction and filter products from the Ersa portfolio - spanning point-of-use arm extractors, central fume management units, and replacement filter cassettes. Products comply with IEC 61340-5-1 ESD-safe housing requirements where specified, and are shipped from stock for rapid integration into existing production environments.

Key technical advantages - Ersa Soldering Fume Extraction at a glance

⚡ Up to 99.97% filtration - HEPA H14 multi-stage filter for particles >0.3 µm

↕ 150-1,200 m³/h extraction volume - scalable from single workstation to central SMT line

🛠 Tool-free filter change - cassette system, filter life indicator included

⚙ Noise level from 48 dB(A) - suitable for continuous operator-adjacent use

🛡 TRGS 900 / BGR 121 compliant - meets German and EU workplace air quality standards

✓ 34 products in stock - extractors, central units, and OEM replacement filters

Ersa Fume Extraction - Product Overview

Series / Product	Application	Key Spec	Feature
EASY ARM 1	Single-station manual soldering	ca. 150 m³/h, 48 dB(A)	Flexible arm, activated carbon + prefilter
EASY ARM 2	Dual-station / rework	ca. 300 m³/h	Two-arm configuration, HEPA option
EASY CENTER	Central extraction, up to 8 stations	ca. 1,200 m³/h	Centralized filter management, low operating cost
Replacement Filters	All Ersa extraction units	HEPA H14, activated carbon cassettes	OEM-compatible, tool-free exchange

Typical application areas: Electronics manufacturing and SMT assembly (IPC-J-STD-001, IEC 61340-5-1), manual and automated soldering workstations (TRGS 900, BGR 121), rework and repair stations in contract electronics manufacturing, semiconductor packaging and wire bonding, medical device production (ISO 13485), and automotive electronics assembly (IATF 16949, VDA 6.3).

✓

Authorized Ersa Distributor Official Ersa partner - full product range, genuine OEM filters and spare parts

📦

34 Products in Stock Extractors, central units, and replacement filter cassettes - ready to ship

🛡

TRGS 900 / BGR 121 Compliant Meets EU and German workplace air quality standards for soldering fume control