What are JBC desoldering tips used for?

JBC desoldering tips are used for removing solder from electronic components safely and efficiently.

Are JBC desoldering tips ESD-safe?

Yes, JBC desoldering tips are designed to be ESD-safe to prevent damage to sensitive electronic components.

Where can I buy JBC desoldering tips online?

You can purchase JBC desoldering tips online at ESD Equipment's website.

What sizes are available for JBC desoldering tips?

JBC desoldering tips come in various sizes to accommodate different desoldering needs.

How do I maintain JBC desoldering tips?

To maintain JBC desoldering tips, clean them regularly and store them properly when not in use.

Can JBC desoldering tips be used with non-JBC stations?

JBC desoldering tips are optimized for JBC stations, but adapters may enable compatibility with non-JBC stations.

What materials are JBC desoldering tips made from?

JBC desoldering tips are made from high-quality materials to ensure durability and effective heat transfer.

JBC Desoldering tips

JBC Soldering Technology

JBC desoldering tips are engineered for precision removal of through-hole and SMD components, with tip-to-ground resistance values consistently below 2 Ω to ensure full ESD compliance per IEC 61340-5-1. The proprietary SLEEP and HIBERNATE system maintains tip temperatures within ±2 °C of setpoint, dramatically reducing oxidation and extending tip service life by up to 5x compared to conventional cartridge systems. Each series - C120, C245, C360, C420, and C560 - is matched to a specific JBC handle, guaranteeing optimized thermal mass and solder evacuation geometry for nozzle diameters ranging from 0.8 mm to 3.5 mm.

This category covers 78 JBC desoldering tip references across five cartridge families, all compatible with JBC's T245, HT420-A, AT420-A, DR560-A, PA120-A, and DS360-A stations. Products meet IEC 61340-5-1 (ESD protection), J-STD-001 (soldering process), and IPC-7711/7721 (rework and repair) requirements, making them the standard choice for electronics manufacturing, rework, and repair operations.

JBC Desoldering tips C245 C245 cartridges for T245 handle, SMD, nozzle 0.8-2.4 mm, <2 Ω tip-to-ground JBC Desoldering tips C420 C420 series for HT420-A and AT420-A, through-hole, nozzle up to 3.5 mm bore JBC Desoldering tips C560 C560 cartridges for DR560-A, high-power desoldering, up to 130 W thermal output JBC Desoldering tips C120 C120 micro tips for PA120-A, fine-pitch SMD desoldering, tip diameter from 0.8 mm JBC Desoldering tips C360 C360 nozzles for DS360-A station, quick-change design, temperature range 50-450 °C

Key technical advantages - JBC Desoldering tips at a glance

⚡ Tip-to-ground <2 Ω - full ESD compliance per IEC 61340-5-1

🔍 Temperature accuracy ±2 °C - closed-loop control, sensor integrated in cartridge

⚙ 5 cartridge families - C120, C245, C360, C420, C560 for each JBC handle

↕ Nozzle range 0.8-3.5 mm - covers micro SMD to large through-hole pads

🛠 SLEEP / HIBERNATE system - oxidation minimized, tip life extended up to 5x

✓ IPC-7711/7721 & J-STD-001 - certified for rework, repair, and production soldering

JBC vs. Hakko vs. Weller vs. Metcal - Desoldering tip comparison

Criterion	JBC	Hakko	Weller	Metcal
Temperature accuracy	±2 °C	±3 °C	±3-5 °C	RF-controlled, no setpoint
Tip-to-ground resistance	<2 Ω	<2 Ω	<2 Ω	<2 Ω
Cartridge families (desoldering)	5 (C120, C245, C360, C420, C560)	2 (FM2026, FM2027)	2 (DS Series)	1 (STTC-series)
Idle / sleep function	SLEEP + HIBERNATE (auto)	Sleep mode	Sleep mode	Auto-shutoff
Nozzle diameter range	0.8-3.5 mm	ca. 0.8-2.5 mm	ca. 0.8-2.3 mm	ca. 0.8-1.6 mm
Tip change method	Tool-free, 5 seconds	Tool-free	Tool required (some models)	Tool-free
IPC-7711/7721 compliance	Yes	Yes	Yes	Yes
Tip longevity (relative)	Up to 5x vs. standard	Standard baseline	Standard baseline	ca. 2-3x (RF induction)

JBC Desoldering tip series - Product overview

Series	Compatible handle / station	Nozzle / bore	Key feature
C245	T245 handle	0.8-2.4 mm	SMD desoldering, compact cartridge, high tip count
C420	HT420-A, AT420-A	up to 3.5 mm	Through-hole, heavy boards, large pad clearance
C560	DR560-A station	1.0-3.5 mm	High-power 130 W, industrial rework, fast heat-up
C120	PA120-A handle	from 0.8 mm	Micro / fine-pitch SMD, precision vacuum desoldering
C360	DS360-A station	50-450 °C range	Quick-change nozzle, vacuum pump integrated, anti-jamming

Typical application areas: Electronics manufacturing and SMT assembly lines (IPC-A-610, J-STD-001), PCB rework and repair (IPC-7711/7721), semiconductor and wafer-level packaging (SEMI S1/S2), medical device assembly (ISO 13485), automotive electronics production (IATF 16949, VDA 6.3), aerospace and defense electronics (AS9100D), ESD-protected workstations and EPA environments (IEC 61340-5-1)

✓

78 JBC desoldering tip references C120, C245, C360, C420, C560 - all handle families covered

⚡

ESD-safe design throughout Tip-to-ground <2 Ω, IEC 61340-5-1 compliant, EPA-ready

🛡

IPC-7711/7721 and J-STD-001 Certified for professional rework, repair, and production processes