Teraohmmeter with touch display, case set with 2 electrodes - A1-ESD TeraResist 8000 ME

The TeraResist 8000 ME is the case-set version of the A1-ESD high-resistance meter for surface and dissipation resistance measurement in ESD protected areas (EPA). Operated via a colour touch display and supplied with two 2.5 kg electrodes, it is ready out of the box for standard-compliant audits and documentation of floors, table mats and packaging.

Key benefits

• Colour touch display for fast, intuitive operation
• Four fixed test voltages (10, 100, 500, 1000 V) covering 1 KΩ to 10 TΩ
• Auto test voltage switches the measuring voltage automatically
• Timer function for measurements over a defined period
• Break-down resistance measurement with graphical display
• Records temperature and relative humidity
• Internal memory and USB export with the supplied PC software

Technical data

• Test voltage 10 V: range 1 KΩ to 200 GΩ
• Test voltage 100 V: range 100 KΩ to 2 TΩ
• Test voltage 500 V: range 500 KΩ to 5 TΩ
• Test voltage 1000 V: range 1 MΩ to 10 TΩ
• Display: colour touch display
• Additional measurement: temperature and relative humidity
• Functions: auto test voltage, timer, break-down measurement
• Data storage: internal memory, USB export
• Power: plug-in supply 230 V~ / 50 Hz, 9 V DC / 300 mA; 4 x AA NiMH battery
• Electrodes: 2 x 2.5 kg to EOS/ESD-S4.1 and S7.1

Scope of supply

• TeraResist 8000 teraohmmeter with plug-in power supply and 4 x AA NiMH batteries
• Test lead yellow 2 m and red 3 m, shrouded plug to shrouded plug (4 mm), touch-safe
• 2 electrodes 2.5 kg to EOS/ESD-S4.1 and S7.1
• USB cable, PC software KL_ReadOut on USB stick
• Operating manual, calibration certificate, sturdy aluminium case

Applications

• Surface and dissipation resistance measurement on floors, table mats and packaging
• Periodic audits and documentation in ESD protected areas (EPA)
• Quality assurance and fault analysis in electronics manufacturing

Standards and compliance

Suitable for testing to IEC 61340 and to EOS/ESD-S4.1 and S7.1. The supplied electrodes meet the requirements of these standards.