What are ESD protection mats?

ESD protection mats are designed to prevent static electricity build-up and protect electronic components from electrostatic discharge.

How do ESD mats work?

ESD mats work by providing a controlled path to ground for any static charges, thereby preventing damage to sensitive electronic equipment.

What are the benefits of using ESD mats?

Using ESD mats helps prevent costly damage to electronics, ensures a safe work environment, and complies with industry standards for static control.

Where should ESD mats be used?

ESD mats should be used in any environment where electronic components are handled, such as workshops, assembly lines, and repair stations.

What types of ESD mats are available?

There are various types of ESD mats, including table mats, floor mats, and roller mats, each designed for specific applications and environments.

How do you clean ESD mats?

ESD mats should be cleaned with a mild detergent and water. Avoid using harsh chemicals that can degrade the mat’s conductive properties.

Can ESD mats be customized?

Yes, many suppliers offer custom sizes and shapes to fit specific workspace requirements, ensuring optimal coverage and protection.

ESD Mats

ESD equipment

ESD mats and matting provide a controlled dissipative surface with a surface resistance of 10⁵-10⁹ Ω (per IEC 61340-5-1), preventing electrostatic discharge events that can destroy sensitive components rated below 100 V HBM. Table mats typically measure 600 x 900 mm to 1200 x 600 mm with a two-layer construction - a dissipative top layer (10⁶-10⁹ Ω) bonded to a conductive ground layer (<10⁶ Ω), connected via a 1 MΩ grounding snap. Floor mats for standing workstations achieve a system resistance <3.5 x 10⁷ Ω when used with ESD footwear, verified per IEC 61340-4-1.

This category covers 175 in-stock products spanning table mats, floor matting, complete workplace sets, ergonomic anti-fatigue ESD floor mats (Ergolastec), and ESD sticky mats for cleanroom contamination control - all compliant with IEC 61340-5-1, DIN EN 61340-5-1, and ANSI/ESD S4.1 standards. Products are sourced from established EPA equipment manufacturers and ship ready for immediate integration into grounded ESD-protected areas (EPAs).

ESD Table Mats 2-layer dissipative/conductive, 10⁶-10⁹ Ω, 1 MΩ snap ground, IEC 61340-5-1 ESD Table Mats Bench-top ESD surface protection, sizes 600x900 mm to 1200x600 mm, ANSI/ESD S4.1 ESD Floor Matting Standing-position mats, system R <3.5 x 10⁷ Ω, IEC 61340-4-1, grounding via press stud ESD Workplace Sets Table mat + floor mat + dual wrist-strap grounding, complete EPA setup per IEC 61340-5-1 Ergolastec ESD Floor Mats Anti-fatigue ergonomic ESD matting, 9-20 mm foam/rubber, R: 10⁶-10⁹ Ω, modular interlocking ESD Sticky Mats Cleanroom adhesive contamination control, 30-60 peel layers, IEC 61340-5-1, ISO Class 4-7

Key technical advantages - ESD Mats & Matting at a glance

⚡ 10⁵-10⁹ Ω surface resistance - dissipative top layer per IEC 61340-5-1

🛡 System R <3.5 x 10⁷ Ω - full EPA ground path verified per IEC 61340-4-1

⚙ 2-layer construction - dissipative + conductive base, 1 MΩ series resistor grounding snap

↕ Sizes 600x400 mm to 1200x600 mm - table mats, floor runners, modular interlocking tiles

🛠 Anti-fatigue cores 9-20 mm - Ergolastec foam/rubber composite, reduces fatigue by ca. 40%

✓ ANSI/ESD S4.1 & DIN EN 61340-5-1 certified - traceable test documentation included

ESD Table Mats vs. ESD Floor Mats vs. Ergolastec Anti-Fatigue Mats vs. ESD Sticky Mats - technical comparison

Criterion	ESD Table Mat	ESD Floor Mat	Ergolastec Anti-Fatigue	ESD Sticky Mat
Surface resistance	10⁶-10⁹ Ω	10⁶-10⁹ Ω	10⁶-10⁹ Ω	10⁶-10⁹ Ω
Primary application	Bench-top component handling	Standing operator position	Ergonomic standing, long shifts	Cleanroom particle capture
Typical thickness	2-3 mm (2-layer vinyl)	3-5 mm rubber	9-20 mm foam/rubber composite	ca. 0.08 mm per layer
Grounding method	10 mm press snap + 1 MΩ cord	Press stud + ground cord	Ground snap + coiled cord	Conductive frame/tape to ground
Applicable standard	IEC 61340-5-1, ANSI/ESD S4.1	IEC 61340-4-1, IEC 61340-5-1	IEC 61340-5-1, EN ISO 20347	IEC 61340-5-1, ISO Class 4-7
Typical size range	600x400 mm - 1200x600 mm	600x900 mm - 1200x1800 mm	Modular tiles, interlocking	300x300 mm to 600x900 mm
Chemical resistance	Good (vinyl/rubber top)	Good (rubber)	Moderate (composite)	N/A (disposable layers)
Reusability	Permanent, cleanable	Permanent, cleanable	Permanent, modular replacement	30-60 peel layers, then replace

ESD Matting product overview

Series / Type	Application	Key specification	Distinctive feature
ESD Table Mats	PCB & component handling at bench	R: 10⁶-10⁹ Ω, 2-layer, 2-3 mm	IEC 61340-5-1, ANSI/ESD S4.1 certified
ESD Floor Matting	Operator standing position, EPA floor	System R <3.5 x 10⁷ Ω, 3-5 mm rubber	IEC 61340-4-1 system test compliant
ESD Workplace Sets	Complete EPA workstation outfitting	Table mat + floor mat + dual wrist-strap cord	Turnkey EPA set, single part number
Ergolastec ESD Floor Mats	Long-shift standing work, ergonomic EPA	9-20 mm foam/rubber, R: 10⁶-10⁹ Ω	Anti-fatigue + ESD in one mat, modular tiles
ESD Sticky Mats	Cleanroom entry particle control	30-60 peel layers, ISO Class 4-7	ESD + contamination control combined

Typical application areas: Electronics manufacturing SMT assembly (IPC-A-610, IEC 61340-5-1), semiconductor wafer handling (SEMI S1/S2), medical device production (ISO 13485), automotive electronics assembly (IATF 16949, VDA 6.3), aerospace and defense electronics (AS9100D), cleanroom environments (ISO 14644-1 Class 4-7), R&D laboratory bench work (DIN EN 61340-5-1), quality inspection stations (IEC 61340-4-1)

✓

IEC 61340-5-1 compliant All mats tested to IEC 61340-5-1 and ANSI/ESD S4.1 - documentation supplied

📦

175 products in stock Table mats, floor matting, Ergolastec, workplace sets and sticky mats - ready to ship

🛡

Full EPA ground path System resistance <3.5 x 10⁷ Ω - compatible with all standard 10 mm snap grounding cords