What are Bosch Rexroth strut profiles and which industries use them for mechanical assemblies?

Bosch Rexroth strut profiles are precision-engineered aluminum extrusion systems designed for modular mechanical construction in industrial workstation and automation applications. These profiles feature standardized T-slot groove systems that enable rapid assembly of frames, conveyor supports, machine guards, and ESD workstations across automotive manufacturing, electronics assembly, packaging machinery, and laboratory environments. The profile system supports loads from light-duty 30x90mm configurations to heavy-duty 100x200mm structural members, with groove widths of 8mm, 10mm, and 20mm accommodating various fastening accessories and connection elements.

How do I select the correct Bosch Rexroth profile dimensions based on load requirements and span length?

Profile selection depends on the section modulus required for your specific load and span combination, with cross-sectional dimensions ranging from 30x90mm for light applications to 100x200mm for structural loads exceeding 500kg. The groove spacing designation follows the format 'slot width x profile length', where standard lengths include 5600mm and 6070mm with custom cutting available. For typical workstation applications, 60x60mm profiles with 20mm grooves handle distributed loads up to 200kg per meter, while 90x90mm profiles with 6mm grooves support concentrated loads exceeding 300kg at mid-span without deflection beyond ISO tolerance limits.

Which international standards govern Bosch Rexroth profile manufacturing and assembly tolerances?

Bosch Rexroth profiles comply with DIN EN 755-9 for aluminum extrusion dimensional tolerances and ISO 9001 quality management standards for consistent manufacturing processes. The T-slot groove geometry adheres to DIN 508 specifications for standardized fastener compatibility, ensuring interchangeability with certified connection elements and accessories. Profile straightness maintains tolerances within 0.5mm per meter length according to EN 12020-2, while surface finish meets Ra 1.6 requirements for smooth sliding applications and proper seal integration in pneumatic and hydraulic system mounting applications.

What are the main differences between R40 and R45 series Bosch Rexroth profile variants?

The R40 series features standard rectangular cross-sections with parallel groove orientation optimized for linear bearing applications and belt conveyor mounting, while R45 series profiles incorporate angular groove configurations at 45-degree orientations for enhanced torsional rigidity. R40 profiles like the 60x60 20x6070mm variant provide maximum accessibility for T-slot nuts and fasteners, whereas R45 profiles such as the 45x90x90L series offer superior moment resistance for cantilever loading conditions. The groove depth varies between series, with R40 maintaining 11mm depth for standard fasteners and R45 providing 8.2mm depth for specialized angular connectors and pivot joints.

What connection methods and accessories are required for Bosch Rexroth profile installation?

Bosch Rexroth profiles utilize T-slot nuts, end fasteners, and angular connectors that slide into the groove system before final positioning and tightening to specified torque values between 8-25 Nm depending on fastener size. The modular design accommodates both rigid connections using corner brackets with M8 or M10 bolts, and adjustable joints using pivot connectors for applications requiring angular positioning or thermal expansion compensation. Profile cutting requires carbide-tipped saws with 120-tooth blades operating at 3000 rpm to maintain groove integrity and prevent aluminum burr formation that could interfere with accessory installation and sealing performance.

What are the operating temperature limits and environmental ratings for Bosch Rexroth aluminum profiles?

Bosch Rexroth aluminum profiles maintain structural integrity across operating temperatures from -40°C to +80°C with minimal thermal expansion of 23 x 10⁻⁶ per Kelvin, making them suitable for both refrigerated environments and moderate heating applications. The anodized surface treatment provides Type II anodizing per MIL-A-8625 with 12-25 micron coating thickness for corrosion resistance equivalent to IP54 environmental protection when properly sealed. Load-bearing capacity remains constant within the temperature range, though thermal cycling above 60°C may require expansion joints every 6 meters to prevent stress concentration at fixed connection points in large structural assemblies.

What maintenance intervals and inspection procedures are recommended for Bosch Rexroth profile assemblies?

Bosch Rexroth profile assemblies require annual inspection of connection torque values and groove condition, with retightening of fasteners to original specifications if loosening exceeds 10% of initial torque measurement. The anodized surface should be cleaned quarterly using mild alkaline detergent to remove industrial contamination that could accelerate corrosion, particularly in environments exceeding 70% relative humidity. Critical load-bearing joints require semi-annual verification of straightness within 0.5mm per meter tolerance, while T-slot grooves need periodic clearing of debris accumulation that could prevent proper fastener engagement and compromise structural integrity over the typical 20-year service life.

Strut profiles Bosch Rexroth - TEC

Basic mechanic elements Bosch Rexroth

Bosch Rexroth strut profiles are engineered on a strict modular grid system with slot sizes of 6, 8, and 10 mm and modular dimensions ranging from 20 mm up to 60 mm - enabling bolt-free, tool-minimal assembly of frames, guards, workstations, and conveyor structures with dimensional tolerances of ±0.1 mm per metre. Aluminium alloy EN AW-6063 T5 profiles deliver a strength-to-weight ratio that supports structural loads exceeding 500 N per connection point, while anodised surfaces provide corrosion resistance suitable for industrial environments to ISO 7599.

As an authorised Bosch Rexroth distributor, esd.equipment stocks 1,149 profile variants across 20 subcategories - covering strut profiles, frame profiles, angle profiles, clamping profiles, suspension profiles, cover profiles, profile rails with trolleys, rectangular tubes, grooved plates, rubber profiles, and conveyor media integration profiles, all fully compatible within the Bosch Rexroth aluminium structural framing system (DIN 55021, ISO 1101).

Strut profiles Bosch Rexroth Universal strut profiles, slot 6/8/10, modular 20-60 mm, EN AW-6063 T5 Strut profiles - slot 6, modular dim. 20 Slot width 6 mm, 20 mm grid, lightweight compact framing series Strut profiles - slot 8, modular dim. 30 Slot width 8 mm, 30 mm grid, standard workstation and guard frames Strut profiles - slot 10, modular dim. 40 Slot width 10 mm, 40 mm grid, heavy-duty structural applications Strut profiles - slot 10, modular dim. 45 Slot width 10 mm, 45 mm grid, compatible with TS 2plus conveyor system Strut profiles - slot 10, modular dim. 50 Slot width 10 mm, 50 mm grid, high load-bearing industrial frames Strut profiles - slot 10, modular dim. 60 Slot width 10 mm, 60 mm grid, max. section size heavy machine guarding Frame profile 22.5x45 Bosch Rexroth 22.5 x 45 mm cross-section, door/panel frame integration, slot 8 Frame profile 22.5x30 Bosch Rexroth 22.5 x 30 mm cross-section, compact frame panels, slot 6 Profile rail with trolley Bosch Rexroth Linear guide rail + roller trolley, load capacity up to 200 kg/m Rectangular tube Bosch Rexroth Closed hollow section, 30x30 to 60x60 mm, high torsional rigidity Angle profile Bosch Rexroth L-section aluminium, 30x30 to 60x60 mm, corner and edge reinforcement Clamping profile Bosch Rexroth Slot-based clamping extrusion, friction-fit panel retention, no drilling Suspension profile Bosch Rexroth Hook-in extrusion for panel and partition suspension, slot 8/10 Cover profiles Bosch Rexroth Snap-in slot covers, width 6/8/10 mm, flush finish, IP protection Caps Bosch Rexroth End caps for open profile cross-sections, 30x30 to 60x60 mm, plastic/metal Rubber profile Bosch Rexroth Vibration-damping rubber extrusion, slot insert, EPDM material Grooved plate 30x100 Bosch Rexroth 30 x 100 mm grooved flat plate, multi-slot, panel and mounting base Radial compensation Bosch Rexroth Curved/arc profile sections for non-orthogonal frame geometries Profiles for conveyor media Bosch Rexroth Integrated cable/hose routing channels, compatible with VarioFlow+, TS 2plus

Key technical advantages - Bosch Rexroth Profiles at a glance

⚙ 3 slot sizes: 6, 8, 10 mm - modular grids of 20, 30, 40, 45, 50, 60 mm for full system compatibility

🛠 Tolerance ±0.1 mm/m - precision-extruded EN AW-6063 T5 aluminium alloy, ISO 1101

↕ Cross-sections from 20x20 to 120x120 mm - scalable from lightweight to heavy-duty structural frames

🔍 Anodised surface Ra < 1.0 µm - corrosion resistance to ISO 7599, Class 20 anodising

📦 1,149 variants in stock - strut, frame, angle, clamping, suspension, cover, rubber and conveyor profiles

✓ DIN 55021 / ISO 1101 compliant - fully interchangeable within Bosch Rexroth aluminium structural framing system

Bosch Rexroth Profile series - technical comparison

Criterion	Slot 8 / Grid 30	Slot 6 / Grid 20	Slot 10 / Grid 45	Slot 10 / Grid 60
Slot width	8 mm	6 mm	10 mm	10 mm
Modular dimension	30 mm	20 mm	45 mm	60 mm
Typical cross-sections	30x30 to 90x90 mm	20x20 to 40x40 mm	45x45 to 90x90 mm	60x60 to 120x120 mm
Primary application	Workstations, guards, conveyors	Light enclosures, fixtures	TS 2plus conveyor frames	Heavy machine frames
Connector bolt thread	M8	M6	M10	M10 / M12
Max. static load (per node, ca.)	ca. 3,500 N	ca. 1,500 N	ca. 5,000 N	ca. 8,000 N
Material	EN AW-6063 T5, anodised	EN AW-6063 T5, anodised	EN AW-6063 T5, anodised	EN AW-6063 T5, anodised
Cross-system compatibility	VarioFlow+, TS 5, workstations	Fixtures, small devices	TS 2plus conveyor	Heavy structures only