Lift positioning unit HP 1/P h=0-50mm
- This Item: €1,497.46Excl. 19% VAT , excl. Shipping Cost
- Bosch Rexroth 3842542500. Sensor Ø 6.5 x 30 mm €66.65Excl. 19% VAT , excl. Shipping Cost
- Bosch Rexroth 3842998287. Curve CU 1/90 €2,975.30Excl. 19% VAT , excl. Shipping Cost
Lift positioning unit HP 1/P h=0-50mm
- Can be used with workpiece pallets WT 1/P
- Positioning via the HP 1/P positioning pins and the positioning bushings on the WT 1/P workpiece pallet
- Permissible vertical process force up to 400 N incl. WT 1/P. The positioning plate of the HP 1/P supports the WT 1/P on its carrying plate during this process.
- Repeat accuracy in X- and Y-direction: ± 0.025 mm
- Fixed stop for pre-positioning the arriving workpiece pallet. Can be replaced with a damper DA 1/B if necessary.
- With the HP 1/P in the version with variable lift, the lifting height above conveying level is max. 50 mm. The lifting height is infinitely variable.
- The version with a fixed lifting height 15 mm above the conveying level has an extremely low installation height. It is therefore particularly suited for use on manual workstations without restricting the legroom.
- The HP 1/P has three positions:- Bottom position: WT on the section are let through.- Center position: WT are stopped on the section (by integrated fixed stop or optional damper DA 1/B). The center position can be approached from the bottom and the top position.
ESD | yes |
Permissible vertical process force [N] | 400 |
Lift of WT over conveyor medium [h0] | 0 ... 50 |
Dry room [rF] | lt1 |
Pneumatic straight connection [] [mm] | 6 |
Preferred values [mm] | 80,120,160 |
required compressed air connection [pmin] [bar] | 4 |
Repetition accuracy | 0,025 |
Scope of delivery | Including all fastening elements,Protective housing,Switch bracket SH 1/S for querying the Workpiece pallet position in the HP 1/P,Switch bracket SH 1/M-A for querying the position of the HP 1/P,Pneumatic screw fitting |
Delivery information | Fully assembled |
required compressed air connection [pmax] [bar] | 6 |
Recommended accessories | VE 1 stop gate for pre-separation,Damper DA 1/B,Sensor 6.5 mm SN = 4 mm for querying the Workpiece pallet position in the HP 1/P and for querying the upper position of the HP 1/P |
Weight [kg] | 0 |
Execution | TEC |
---|---|
Manufacturer Nr. | 3842998493 |
Manufacturer | Bosch Rexroth |
Country of Manufacture | Germany |
Weight | 0.009900 |
HS-Code | 84313900 |