What types of soldering equipment does Hakko offer?

Hakko offers soldering stations, tips, and a variety of accessories for precise soldering tasks.

Are Hakko products ESD safe?

Yes, Hakko provides ESD-safe equipment to protect sensitive electronic components.

What is the warranty period for Hakko soldering tools?

Hakko typically offers a warranty period for its products, though specific terms may vary by product and region.

Can I find replacement tips for Hakko soldering irons?

Yes, a wide selection of replacement tips is available for Hakko soldering irons.

Does Hakko sell desoldering equipment?

Hakko offers desoldering stations and accessories to assist with removing solder from electronic components.

Where can I buy Hakko soldering products?

Hakko products are available through various authorized distributors and online retailers.

What accessories are available for Hakko equipment?

Hakko offers a range of accessories including nozzles, handpieces, and maintenance tools.

Hakko Soldering stations

Soldering

Hakko soldering stations deliver precision temperature control from 50 °C to 480 °C with stability tolerances of ±1 °C, meeting the stringent requirements of IEC 61010-1 and J-STD-001. The FX-951 and FX-100 platforms feature thermal recovery times under 3 seconds and tip-to-ground resistance below 2 Ω - critical for ESD-safe rework on SMPS boards, BGA components, and fine-pitch QFP packages. The FM-203 multi-port station supports simultaneous dual-operator use with independent channel calibration, cutting setup overhead in high-throughput SMT environments.

As a specialist distributor for professional soldering technology, esd.equipment stocks 1,365 Hakko products across 10 subcategories - from nitrogen-assisted soldering systems and hot air rework stations to precision desoldering tools, board holders, and the full range of T12, T15, and FM series replacement tips. All stations comply with RoHS 3 (EU 2015/863) and IPC-7711/7721 rework standards, making them suitable for lead-free and high-reliability assembly lines.

Hakko Accessories Spare parts, cleaning tools, filters - FX-951, FX-888D compatible Hakko Accessories for Workplace ESD mats, fume extractors, arm rests - EPA-compliant workstation add-ons Hakko Soldering and Desoldering Stations FX-951, FX-100, FM-203 - 50-480 °C, ±1 °C, tip-to-ground <2 Ω Hakko Nitrogen System N2-assisted soldering, oxidation-free joints, lead-free process compatible Hakko Soldering and Desoldering Tools FR-301, FR-810, FM-2024 - vacuum desoldering, hand tools, J-STD-001 Hakko Stands for Soldering Tools B2215, B2216 holders - ESD-safe, iron tip resting temperature maintained Hakko Board Holders PCB clamps and vises - adjustable width, ESD-dissipative materials Hakko Soldering and Desoldering Tips T12, T15, FM series - conical, chisel, bevel, knife, micro profiles Hakko Hot Air Stations and Preheaters FR-810B, HJ3100 - 50-500 °C hot air, BGA/SMD rework, IPC-7711 Hakko Soldering Pots FX-301, FX-300 - 200-500 °C, tinning and wire tinning applications

Key technical advantages - Hakko Soldering Stations at a glance

⚡ 50-480 °C range, ±1 °C stability - closed-loop PID control, IEC 61010-1 compliant

⌛ Thermal recovery under 3 seconds - high-wattage cartridge heaters (65-150 W)

🛡 Tip-to-ground resistance <2 Ω - ESD-safe design, IEC 61340-5-1 compatible

⚙ T12 / T15 / FM tip system - 50+ tip profiles, tool-free hot-swap in under 5 s

🛠 Dual-port FM-203 platform - independent channel calibration, J-STD-001 rework

✓ RoHS 3 and IPC-7711/7721 - lead-free process validated, CE and UL marked

Hakko vs. Weller vs. Metcal vs. JBC - Technical Comparison

Criterion	Hakko	Weller	Metcal	JBC
Temperature range	50-480 °C	50-450 °C	Fixed SmartHeat profiles	90-450 °C
Temperature stability	±1 °C	±2 °C	±1 °C	±1 °C
Thermal recovery time	<3 s	ca. 4-6 s	ca. 2-4 s	<2 s
Tip-to-ground resistance	<2 Ω	<5 Ω	<2 Ω	<2 Ω
Tip system	T12 / T15 / FM hot-swap	RTM / LT bayonet	STTC cartridge	C245 / C210 cartridge
Nitrogen system available	Yes - integrated N2	Selected models	No	Selected models
Multi-port station	FM-203 dual port	WX2021 dual port	Single port only	DDPE dual port
Norm compliance	IEC 61010-1, J-STD-001, RoHS 3	IEC 61010-1, RoHS 3	IEC 61010-1, J-STD-001	IEC 61010-1, J-STD-001

Hakko Product Overview - Key Station Series

Series	Application	Key Specification	Highlight
FX-951	SMT rework, precision soldering	70 W, 50-480 °C, T12 tips	Tip-integrated heater, <3 s recovery
FX-100	High-end production soldering	150 W, induction heating, T31 tips	Contactless temp sensing, ±1 °C
FM-203	Dual-operator / multi-process	2-port, FM tip series, J-STD-001	Independent channel calibration per port
FR-810B	BGA / SMD hot air rework	750 W, 50-500 °C, 25 l/min airflow	Digital airflow control, IPC-7711
FR-301	Through-hole desoldering	100 W, built-in vacuum pump, N1 tips	One-hand operation, self-cleaning nozzle
Nitrogen System	Oxidation-free lead-free soldering	N2 purity >99.9 %, compatible FX/FM	Reduces bridging on fine-pitch <0.5 mm

Typical application areas: Electronics manufacturing and SMT assembly (IPC-A-610, J-STD-001), semiconductor and wafer-level packaging (SEMI S1/S2), medical device assembly (ISO 13485), automotive electronics and ECU production (IATF 16949, VDA 6.3), aerospace and defense rework (AS9100D, IPC-7711/7721), PCB prototyping and R&D laboratories, high-reliability through-hole and BGA rework, lead-free process validation per RoHS 3 (EU 2015/863).

✓

1,365 Hakko Products in Stock FX-951, FX-100, FM-203, FR-810B, FR-301 and full tip ranges available

🛡

IEC 61010-1, J-STD-001, RoHS 3 All stations CE and UL marked, lead-free process validated

⚡

ESD-Safe Design Throughout Tip-to-ground <2 Ω, grounding cord included, IEC 61340-5-1 compatible