Hakko T37 Serie
Hakko Soldering and Desoldering Tips
The Hakko T37 series delivers precision soldering tips engineered for the Hakko FX-971 soldering station, operating at tip temperatures from 200 °C to 450 °C with a thermal recovery rated to maintain setpoint within ±2 °C under continuous load. Each tip integrates the heater and temperature sensor directly at the tip apex - reducing thermal mass and enabling contact angles and geometries suited to fine-pitch SMT components down to 0402 package sizes. Tip-to-ground resistance is maintained below 2 Ω in compliance with IEC 61340-5-1, ensuring safe ESD-protected operation throughout the EPA.
As a specialist distributor for professional soldering equipment, esd.equipment stocks all 13 current T37 tip variants - including chisel, bevel, conical, and knife profiles - sourced directly from Hakko and supplied with full manufacturer traceability. All tips conform to IPC J-STD-001 process requirements and are compatible with lead-free alloys (Sn96.5Ag3Cu0.5, melting point 217 °C) as well as traditional Sn60Pb40 solder.
Hakko T37 Series - Product Overview
| Tip Type | Profile | Typical Application | Alloy Compatibility |
|---|---|---|---|
| T37-D16 Chisel 1.6 mm | Flat chisel | General SMT, drag soldering, pads | SAC305, Sn60Pb40 |
| T37-D24 Chisel 2.4 mm | Flat chisel | Through-hole, larger pads, connectors | SAC305, Sn60Pb40 |
| T37-BC2 Bevel 2.0 mm | Angled bevel | Fine-pitch SMD, QFP, SOP packages | SAC305, Sn60Pb40 |
| T37-I Conical | Needle point | 0402 components, micro repair, rework | SAC305, Sn60Pb40 |
| T37-K Knife | Blade / knife | Lead trimming, multi-pin IC, cutting flux | SAC305, Sn60Pb40 |
Typical application areas: SMT electronics manufacturing (IPC J-STD-001, IPC-A-610), semiconductor and PCB assembly (IEC 61340-5-1 ESD protection), medical device manufacturing (ISO 13485), automotive electronics rework (IATF 16949, VDA 6.3), aerospace and defense PCB repair (AS9100), laboratory and R&D prototyping, professional electronics service and repair workshops.