Chisel soldering tip bent 3.2 x 1.5 mm for AP130 - JBC C130-418

When feeding solder wire automatically or by hand, the tip must sit at the right angle to the joint. The JBC C130-418 is a bent, chisel-shaped C130 series cartridge for the AP130 handpiece. The angled 3.2 x 1.5 mm tip is matched to the position of the solder wire and can be aligned precisely on the handpiece using the anti-rotation feature.

Benefits

• Angled chisel tip 3.2 x 1.5 mm matched to the solder wire position
• Alignment via the anti-rotation feature on the AP130 handpiece
• Integrated heater built into the cartridge for short heat-up and recovery times
• Tip length 11.5 mm for good access to the joint
• Tool-free hot swap thanks to the cartridge design

Technical data

Applications

Soldering with automatic or guided wire feed on the AP130 handpiece, where an angled tip improves the view of and access to the joint.

Compatibility and scope of delivery

Fits the JBC AP130 handpiece and AP130-A soldering iron. Supplied as a single soldering cartridge.

RoHS compliant and suitable for use on ESD-safe JBC soldering systems to IEC 61340-5-1. Country of origin: Spain.