What are AUER storage accessories and what industrial applications do they serve?

AUER storage accessories encompass specialized material handling equipment including hand trucks for toolboxes (SK V TB series), stacking trolleys with dimensions up to 60x41x118 cm, IBC filling bridges for intermediate bulk containers, and protective case padding systems. These accessories serve automotive manufacturing, chemical processing, electronics assembly, and warehouse operations where precise material transport and container handling are critical. The product range specifically addresses industrial environments requiring both standard and ESD-safe material handling solutions for sensitive electronic components and hazardous material containment.

What are the key technical selection criteria for AUER storage accessories?

Selection criteria for AUER storage accessories depend on load capacity specifications, with hand trucks available in TB 43 and TB 64 configurations indicating different weight ratings, and dimensional compatibility requirements such as the 60x41x118 cm stacking trolley specifications. IBC filling bridge models are differentiated by inlet diameter (2 inch standard) and container capacity compatibility ranging from 500-liter to 1000-liter IBC systems. ESD variants like the SW RO stacking trolley provide surface resistivity values compliant with electronics manufacturing requirements, while material construction determines chemical compatibility for specific industrial applications.

Which standards and certifications apply to AUER storage accessories?

AUER storage accessories comply with EN 61340-5-1 standards for electrostatic discharge protection in ESD-designated variants, ensuring surface resistance values between 10^6 and 10^9 ohms for electronics manufacturing environments. IBC filling bridge systems meet UN packaging group specifications and ADR transport regulations for hazardous material handling, while protective case padding follows ISO 9001 quality management standards. Hand truck designs conform to DIN EN 1757-3 safety requirements for manually operated lifting equipment, with load distribution calculations meeting workplace safety directives for industrial material handling applications.

What are the differences between AUER hand truck variants and stacking trolley models?

AUER hand trucks differentiate between SK V TB and SK TB series, where SK V TB models feature variable height adjustment mechanisms for different toolbox configurations, while standard SK TB variants provide fixed-height platforms optimized for specific container dimensions. The TB 43 and TB 64 designations indicate maximum load capacities and platform sizes, with TB 64 models accommodating larger toolbox systems. Stacking trolleys separate into standard SW RO and ESD-safe ESD SW RO variants, where ESD models incorporate conductive materials and grounding provisions for electronics manufacturing environments requiring static discharge protection.

What installation and compatibility requirements apply to AUER IBC filling bridges?

AUER IBC filling bridge systems require level concrete foundations with minimum 2500 kg/m² load bearing capacity and standardized IBC footprint dimensions of 1200x1000 mm for proper installation. The BB IBC series connects via 2-inch BSP threaded inlets compatible with standard intermediate bulk container valve systems, while models like IBC BB 1000 2 specifically accommodate 1000-liter containers with integrated fill level monitoring provisions. Installation height adjustments range from 850-1200 mm to match various IBC configurations, with stainless steel construction ensuring compatibility with chemical processing applications requiring ATEX Zone 1 certification for explosive atmosphere operation.

What safety ratings and environmental specifications apply to AUER storage accessories?

AUER storage accessories maintain IP54 ingress protection rating for dust and water resistance in industrial environments, with operating temperature ranges from -20°C to +60°C for standard models and -10°C to +40°C for ESD variants due to conductive material limitations. IBC filling bridge systems withstand static loads up to 3000 kg and feature integrated safety relief valves rated for 1.5 bar working pressure in chemical processing applications. Hand truck load capacities range from 200 kg for TB 43 models to 300 kg for TB 64 configurations, with polyurethane wheel assemblies providing floor protection and noise reduction below 65 dB during operation.

What maintenance schedules and service life expectations apply to AUER storage accessories?

AUER storage accessories require quarterly inspections of wheel assemblies and load-bearing components, with annual verification of ESD surface resistance values using calibrated megohmmeters to maintain 10^6 to 10^9 ohm specifications. Hand truck wheel replacement intervals average 18-24 months under normal industrial use, while IBC filling bridge seal replacements occur every 12 months or 500 filling cycles to maintain pressure integrity. Expected service life ranges from 10-15 years for stainless steel components and 5-8 years for polymer elements, with proper lubrication of pivot points every 6 months extending operational reliability and maintaining load capacity certifications.

Proxxon Accessories

Proxxon Instruments

Proxxon accessories extend the Micromot devices and precision machines with clamping equipment, measuring tools, drilling jigs and sawing technology. The range includes drilling jigs (BV 2000, item 20002), drill sharpeners (BSG 220, item 21200) and MicroClick torque wrenches covering 6-30 Nm (MC 30), 20-100 Nm (MC 100), 40-200 Nm (MC 200) and 60-320 Nm (MC 320). Fine milling machines of the FF 230 and FF 500/BL series are complemented by ER collet chuck sets, fine feed units and machine vices.

For fine machining, table saws (KS 230), micro lathes (DB 250) with matching chuck accessories, and thickness planers (DH 40) are available. All items are factory-matched to the machines, so adapters (e.g. MICROMOT adapter for FF 500/BL, item 24346) fit without modification.

⚙ MicroClick torque wrenches - ranges MC 30 (6-30 Nm, 1/4"), MC 100 (20-100 Nm, 3/8"), MC 200 (40-200 Nm, 1/2"), MC 320 (60-320 Nm, 1/2")

⚙ Fine milling machines FF 230 / FF 500/BL - incl. ER collet chuck sets (2.4-5.0 mm, 5-piece), fine feed and CNC-ready version

⚙ Drilling jig BV 2000 - item 20002, adapter for MIS 1 and BV 2000 (item 20004)

⚡ Drill sharpener BSG 220 - item 21200, adapter set 21232 for various drill diameters

✓ Clamping tools and slides - PM 40 precision machine vice, indexing devices, parallel blocks set 14-piece

Machine	Compatible accessories (selection)
Fine milling machine FF 500/BL	ER collet chuck set (24253), fine feed (24254), MICROMOT adapter (24346), chip tray (24322)
Table saw KS 230	Saw blades and guide rails (machine-specific)
Micro lathe DB 250	3-jaw chuck (27026), 4-jaw chuck (27024), drill chuck with quill (27028), HSS turning chisel set 5-piece (27023)
Drilling jig BV 2000	Adapter for MIS 1 and BV 2000 (20004)
All 1/4" machines	Indexing device UT 400/CNC (24423)

Typical applications: Model and prototype construction with fine milling machines and lathes, maintenance and sharpening of twist drills with BSG 220, precision torque fastening in mechanical and instrument engineering with MicroClick wrenches, planing and sawing of wood and plastic materials in workshop settings, and CNC retrofitting of existing FF 500/BL machines.