Workplaces Treston Concept Ergo

Treston Concept Ergo workbenches are height-adjustable industrial workstations designed for electronics manufacturing, assembly operations, and precision engineering environments. These ergonomic workbenches feature manual crank height adjustment from 675 to 1025 mm and support maximum loads up to 200 kg, making them suitable for automotive component assembly, medical device manufacturing, and quality control laboratories. The ESD-compliant versions provide electrostatic discharge protection essential for semiconductor handling and electronic circuit board assembly operations.

Treston Concept Ergo frames are available in standardized dimensions ranging from 1000x600 mm to 1800x900 mm with consistent 200 kg maximum load capacity across all models. The height adjustment mechanism uses a manual hand crank system providing 350 mm of travel from 675 to 1025 mm working height. Frame selection depends on workspace requirements, with 600 mm and 750 mm depth options accommodating different equipment layouts, while lengths from 1000 mm to 1800 mm suit individual workstations through extended assembly lines.

Treston Concept Ergo ESD workbenches comply with IEC 61340-5-1 standard for electrostatic discharge control in electronics manufacturing environments. The ESD surface treatment provides controlled conductivity to safely dissipate static charges while maintaining operator safety according to EN 100015 guidelines. These workbenches meet ISO 14040 environmental management standards and are designed to support IPC-A-610 acceptability requirements for electronic assemblies in cleanroom and controlled manufacturing environments.

Treston Concept tabletops are available with ESD-compliant surfaces for electronics work or HPL high-pressure laminate for general industrial applications. ESD surfaces like the TT15075-ESD model provide controlled static dissipation with surface resistance typically between 10^6 to 10^9 ohms per IEC 61340 requirements. HPL surfaces such as the TT15075-HPL offer superior chemical resistance and durability for mechanical assembly operations where static control is not required, featuring melamine resin construction with higher impact resistance than standard ESD materials.

Treston Concept Ergo frames require level floor surfaces with 50 mm clearance around the perimeter for height adjustment operation and maintenance access. The modular design allows tabletops to be mounted on frames using standardized attachment points with M8 bolts torqued to 25 Nm specification. Frame assemblies arrive pre-assembled requiring only tabletop installation and leveling adjustment using integrated feet with 20 mm height compensation range, while the manual crank mechanism requires 800 mm minimum side clearance for full operation.

Treston Concept Ergo workbenches operate safely in ambient temperatures from 5°C to 40°C with relative humidity up to 85% non-condensing according to EN 527-1 office furniture standards. The frames meet IP20 protection rating suitable for indoor industrial environments with protection against solid objects larger than 12.5 mm. Load distribution requirements specify maximum point loads of 50 kg per square foot while maintaining the 200 kg total capacity, with safety factors meeting DIN EN ISO 12100 machinery safety guidelines for manual height adjustment mechanisms.

Treston Concept Ergo workbenches require quarterly inspection of height adjustment mechanisms including lubrication of crank gears and verification of 200 kg load capacity retention. The manual crank system should be cycled monthly through full travel range to prevent binding, while ESD surface resistance must be tested annually using EN 61340-5-1 test methods to verify 10^6 to 10^9 ohm resistance values. Expected service life exceeds 15 years under normal industrial use with proper maintenance, including annual torque verification of frame connections and surface cleaning with approved ESD-safe solvents.