Which mounting suits a workbench?

The articulated arm is the most flexible solution, it swings across the work surface and adjusts in height. The table clamp requires a free table edge, the magnetic holder a ferromagnetic surface, and the base needs no fixing at all.

Which light colour suits assembly and inspection?

Warm white at 3000 K is comfortable at permanent stations. For visual and colour inspection, 5000 K to 6500 K works better because contrast stands out more clearly. For changing tasks, luminaires with tunable white let you set the light colour yourself.

When do I need high colour rendering?

For colour checks, paint inspection and work on colour-coded wiring. Luminaires with Ra 90 and Ra 98 cover that, while Ra 85 is enough for plain assembly steps.

Are there luminaires for ESD workplaces?

Yes. In the ESD attribute, luminaires are marked TEC or ESD (antistatic), and both suit workplaces inside an EPA.

Which supply voltage is common?

Mains operation at 100-240 V or 230 V is the rule. Low voltage at 24 V or 48 V makes sense when the luminaire is fed from an existing workstation system.

Workplace lighting

Workplace luminaires

Workplace luminaires put the light where the work happens: above the bench, the assembly station and the inspection desk. The range runs from the compact clamp lamp to the long bench luminaire, among others from Starlight, Glamox and LED2WORK. Luminous flux runs from 105 lm to 11394 lm and the light colour from 3000 K warm white to 6500 K, with Ra 90 and Ra 98 available for colour and paint checks. Mounting is on an articulated arm, a table clamp, a magnetic holder or a base, and power comes from 24 V, 48 V or the mains.

Straight to the right workplace luminaire

The most common requirements as ready-made filters inside this category.

Articulated armPositioned freely above bench and inspection desk.swivels and tilts Table clampClamps onto the edge of the table top.no drilling Ra 90True colour rendering for checking and inspection. 3000 KWarm light for assembly and permanent stations.warm white Tunable whiteLight colour chosen to suit the task.adjustable light colour DimmableBrightness matched to the task and to daylight. IP67Sealed against dust, chips and splash water.temporary immersion 24 VRuns off an existing system power supply.low voltage

163 items
10 manufacturers
Net prices plus VAT

View as Grid view List view

Show

per page

Buying guide

How to choose Workplace luminaires

What matters when choosing: properties, comparison and typical applications.

Selection criteria

Criterion	In this category	Note
Mounting	Articulated arm, table clamp, magnetic holder, base	Articulated arm for changing working heights, clamp for fixed stations.
Luminous flux	105 lm to 11394 lm	Fine assembly and visual inspection need far more light than a storage shelf.
Light colour	3000 K, 4000 K, 5000 K, 5500 K, 5700 K, 6000 K, 6500 K, tunable white	Warm white for continuous work, neutral and cool white for inspection.
Colour rendering	Ra 85, Ra 90, Ra 98	Ra 90 and above for colour and paint checks.
Beam angle	6° to 118°	Narrow angles create accents, wide angles cover the whole surface.
Protection rating	IP20, IP40, IP50, IP52, IP65, IP67	IP65 and IP67 for dust, chips and splash water.
Power	3 W to 500 W	Wattage alone says little, compare the luminous flux as well.
Supply voltage	100-240 V, 24 V, 48 V, 110-240 V, 100-305 V, 230 V, 5 V	24 V and 48 V suit existing workstation systems.
ESD	TEC, ESD (antistatic)	Marking for workplaces inside an EPA.

Workplace luminaires

How to choose Workplace luminaires

Selection criteria

Frequently asked questions about Workplace luminaires