€128.25
Excl. 19% VAT , excl. Shipping Cost
Article
HK-FX-888D-16-BY
Manufacturer Nr.
FX 888D-16 BY
- Digital model in an analog-model price bracket
- Features adjustment mode, preset mode, and password function
- Separable tip/heater design provides excellent value for money
- Selectable soldering iron for N2 system as usage at your option
Frequently Bought Together
- This Item: €128.25Excl. 19% VAT , excl. Shipping Cost
- Hakko T18-C05. Soldering tip Shape-0.5C €7.60Excl. 19% VAT , excl. Shipping Cost
- Hakko T18-C2. Soldering tip Shape-2C €5.89Excl. 19% VAT , excl. Shipping Cost
Total price
Reliable digital technology by HAKKO - Introducing the HAKKO FX-888D
Excellent thermal recovery
- Heater output has been increased by 30% compared to that of the conventional models HAKKO 936/937. Also FX-888D delivers excellent thermal recovery by using T18 series tips for their terrific heat conductivity.
This allows soldering at a lower set temperature and reducing the thermal impact on components as well as tip oxidation that can shorten tip life.
- Thermal recovery graph
Rise time to 350°C is 20 seconds faster and tip temperature drop is reduced during continuous work.
*Click here to enlarge
- HAKKO FX-888D performance comparison graph with conventional stations
Able to shorten the time required for the same work and improve work efficiency significantly.
*Click here to enlarge
Designed to be User-Friendly
- Small footprint
Compact station body requires a space of only 100 (W) x 120 (D) mm. What's more, points that come into contact with the floor are positioned as close to the outer edge of the body as possible to improve stability and make the station difficult to fall over. - Simple and easy operation
With only two operation buttons of UP and ENTER in the center, operation is simple and easy. Even if you're not familiar with operation of machines, you can operate it without difficulty. - Iron holder with full of functions
An iron holder of the same color of a soldering station comes as a set. The highly functional iron holder not only improves ease of use, but also brings a sense of visual consistency to the work environment.
Silver | Blue & yellow | ||
Soldering station | Iron holder | Soldering station | Iron holder |
Strict temperature management
- Digital display
The FX-888D's digital display makes it easy to check the set temperature at a glance.
- Password function
Settings can be locked using a password to prevent them from being changed unexpectedly. Of course, it is possible to restrict all setting changes or prevent users from switching to particular modes. It allows you to choose a style of usage best suited for your worksite. - Preset mode
This feature is very convenient when you want to change the set temperature to suit a particular workpiece, component, or tip shape. Simply select the desired temperature from a selection of preset temperatures registered in advance. (Up to 5 preset temperatures can be registered.) Preset mode can save your trouble and improve workability.
- Adjustment mode
Temperature adjustment* is an essential part of any strict quality control system. With adjustment mode, what used to be a troublesome procedure is now as simple as entering the measured tip temperature to FX-888D.
*Adjust the tip temperature to match the set temperature in case that there is a difference between those temperatures due to tip shape, heater replacement, or other factors.
Measuring tip temperature with a tip thermometer (HAKKO FG-100)
HAKKO FX-8802 N2 (nitrogen) gas system | |
A space-saving N2 system. Anti-oxidation and pre-heating significantly improve solderability. | |
—Example Configuration (N2 System) | |
Soldering station, Iron holder, N2 gas generator, and N2 flowmeter must be purchased separately. |
HAKKO FX-8803 One-hand, manual-solder-feed iron | |
— Example Configuration (One-hand, Manual-Solder-Feed System) | |
Soldering station and Iron holder must be purchased separately. |
HAKKO FX-8804 Hot tweezers | |
—Example Configuration (Hot Tweezer System) | |
Soldering station, cap, and Iron holder must be purchased separately. |
HAKKO FX-8805 Soldering iron L type | |
—Example Configuration (Soldering iron L type) | |
Soldering station and Iron holder must be purchased separately. |
How to remove the bottom plate. | |
1. Press the slide lock button inward. NotePress it firmly from upward. It is easy to open by the slide lock sloping inward. | ||
2. Open the iron holder base while pressing the slide lock. | ||
3. Remove the solder waste in the bottom plate. |
Packing List
Model No. | Unit Color | Iron Holder Color | Packing list |
FX-888D | Silver | Silver | Soldering station (FX-888D), Soldering iron (FX-8801 with soldering tip type B), Iron holder (with cleaning wire, cleaning sponge), Instruction Manual |
Blue-Yellow | Blue-Yellow |
*Rubber cleaner sold separately. |
Specifications
Model No. | FX-888D |
---|---|
Power consumption | 70W |
Temperature range | 50 to 480ºC |
Temperature stability | ±1ºC at idle temperature (When set to 200 to 480ºC) |
・Station
Output voltage | AC 26V |
---|---|
Dimensions | 100(W)×120(H)×120(D)mm |
Weight | 1.2kg |
・Soldering Iron
Power consumption | 65W (26V) |
---|---|
Tip to ground resistance | <2Ω |
Tip to ground potential | <2mV |
Heating element | Ceramic heater |
Standard tip | Shape-B (No.T18-B) |
Cord length | 1.2m |
Total length | 217mm (with B tip) |
Weight | 46g (with B tip) |
* Total length and weight (w/o cord)
Replacement parts
Part No. | Name | Specifications | |
---|---|---|---|
FH800-03SV | Iron holder <w/ cleaning sponge, cleaning wire> | silver | |
FH800-03BY | Iron holder <w/ cleaning sponge, cleaning wire> | blue & yellow | |
FX8801-01 | Soldering iron FX-8801 | 65W (26V, with B tip) | |
B1785 | Nut | ||
B2022 | Nipple | ||
B3469 | Enclosure pipe | ||
A1559 | Cleaning sponge | ||
A1561 | Cleaning wire |
Options
Part No. | Name | Specifications | |
---|---|---|---|
FX8802-01 | Soldering iron FX-8802 | 65W (26V, with B tip) | |
FX8803-02 | Soldering iron FX-8803 | 65W (26V, with 3CF tip) | |
FX8804-02 | Soldering iron FX-8804 | 65W (26V, with 2L tip) | |
FX8805-01 | Soldering iron FX-8805 | 65W (26V, with B tip) | |
B3474 | Rubber cleaner | ||
C1437 | Iron holder <w/ cleaning sponge> | for 951, 952, 958, 959 and FX-8803 | |
FH800-04BY | Iron holder <w/ cleaning sponge> | blue & yellow, for FX-8804 |
Maintenance
Category | Title |
---|---|
How to use | Select Tip Shape |
How to use | Difference between BC/C type and BCF/CF type |
How to use | HAKKO N2 system |
Maintenance | Why doesn't solder flow evenly onto a tip though it is brand-new? |
Maintenance | If solder does not flow onto the tip... |
Maintenance | Tip life |
Maintenance | Why do tips oxidize easily when they are used with lead-free solder? |
Maintenance | Maintenance and inspection of station-type soldering irons |
Execution | TEC |
---|---|
Manufacturer Nr. | FX 888D-16 BY |
Manufacturer | Hakko |
EAN | 4962615039683 |
Weight | 0.009900 |
Note | Es gibt keine Lieferung von Hakko Produkten in die Schweiz |
HS-Code | 85151990 |
Customers Who Bought This Item Also Bought