Positioning and Orientation Bosch Rexroth
TS 2plus transfer system
Positioning and orienting components in the Bosch Rexroth TS 2plus transfer system covers the assemblies that stop, align, and hold workpiece pallets at fixed stations along the conveyor. The range includes positioning units (PE 2/XP BG1 and BG2), inner guides (WT2, lengths 150 to 600 mm), anvil plates (HP2/K, formats 160x160 to 240x320 mm), and centring pins (D12x39, D12x30, plain and flattened).
The PE 2 series positioning units are available in several table widths (LT160 to LT400, BWT160 to BWT320) and fit directly into the TS 2plus track profile. Centring pins and anvil plates extend basic positioning for repeatable tool engagement at assembly or test stations.
| Type | Table width LT | Carrier width BWT | Application |
|---|---|---|---|
| PE 2/XP BG1 | - | 160-240 | Standard positioning, lighter carriers |
| PE 2/XP BG2 | - | 240-320 | Heavier carriers, wider workpieces |
| PE 2 LT160*B160 | 160 | 160 | Narrow tracks, compact parts |
| PE 2 LT400*B240 | 400 | 240 | Wider parts, mid-size track |
| PE 2 LT400*B320 | 400 | 320 | Large workpieces, maximum width |
Selection depends on the track width of the installed TS 2plus system and the workpiece carrier size. Inner guides and centring pins are combined to match the positioning type.
Typical applications: Cycled assembly lines with TS 2plus where workpiece carriers must be stopped and aligned at defined stations for screwing, testing, or bonding operations. Anvil plates are used for joining and press operations; centring pins ensure repeatability at tool engagement points. Typical industries: electronics assembly, automotive suppliers, medical device manufacturing.
