What are KARL Quadro table system basic equipment workstations and their primary industrial applications?

KARL Quadro table system basic equipment workstations are modular industrial work surfaces designed for electronics manufacturing, assembly operations, and precision manufacturing environments. These systems feature standardized dimensions of 2135x880mm work surface with heights of either 1600mm or 2200mm, providing ergonomic workspace solutions for technicians and engineers. The modular design accommodates both ESD-protected and standard configurations, making them suitable for semiconductor manufacturing, electronic component assembly, quality control laboratories, and general industrial production facilities where consistent work surface height and anti-static properties are critical.

What are the key technical selection criteria for KARL Quadro basic equipment table systems?

Selection of KARL Quadro basic equipment table systems depends on workspace height requirements, with two primary configurations available at 1600mm and 2200mm total height while maintaining consistent 2135x880mm work surface dimensions. ESD protection capability represents the critical selection criterion, with models like Karl 10.055.28 and Karl 10.050.28 offering electrostatic discharge protection for sensitive electronic work, while standard models like Karl 10.055.18 provide general industrial workspace functionality. The modular framework allows integration of additional components and accessories while maintaining structural stability across all height configurations, ensuring consistent performance regardless of specific application requirements.

Which international standards and certifications apply to KARL Quadro table system installations?

KARL Quadro table systems comply with DIN EN 61340-5-1 standards for ESD-protected work surfaces, ensuring proper electrostatic discharge control in electronics manufacturing environments. The modular construction meets ISO 14001 environmental management requirements and follows DIN 4543 workplace ergonomics guidelines for industrial work surface heights and dimensions. ESD-equipped variants maintain surface resistance values within the 10^6 to 10^9 ohm range as specified by IEC 61340-4-1, while structural components conform to European workplace safety directives EN 527 for office and industrial furniture stability and load-bearing capacity.

What are the main differences between KARL Quadro basic equipment product variants?

The primary differentiation between KARL Quadro variants lies in total system height, with 1600mm models like Karl 10.050.24 designed for seated workstations and 2200mm variants such as Karl 10.055.24 configured for standing operations. ESD protection capability distinguishes models, where ESD-Arbeitstisch variants provide anti-static work surfaces for electronics handling while standard Arbeitstisch models serve general industrial applications. All variants maintain identical 2135x880mm work surface dimensions and modular mounting compatibility, ensuring consistent workspace area and accessory integration regardless of height configuration or ESD protection level selected for specific application requirements.

What installation requirements and system compatibility considerations apply to KARL Quadro table systems?

KARL Quadro table system installation requires level floor surfaces with load-bearing capacity of minimum 150kg per square meter and access to standard 230V electrical connections for ESD grounding systems. The modular framework design ensures compatibility with standard industrial mounting accessories and requires assembly clearance of 500mm on all sides during installation. ESD variants need proper grounding connection to facility earth systems through dedicated grounding points, while the 2135x880mm footprint allows integration with existing conveyor systems, lighting arrays, and pneumatic tool connections commonly found in electronics manufacturing and assembly environments.

What safety ratings and environmental operating parameters apply to KARL Quadro workstations?

KARL Quadro workstations operate reliably within temperature ranges of +10°C to +40°C with relative humidity between 30% and 70% non-condensing, meeting standard industrial environmental conditions. The modular construction provides IP20 protection rating against solid particles larger than 12mm diameter while maintaining proper ventilation for electronic equipment integration. ESD-protected variants maintain surface resistance stability across the specified temperature range, ensuring consistent electrostatic discharge protection between 10^6 and 10^9 ohms throughout normal industrial operating conditions without requiring additional environmental controls or specialized HVAC systems.

What maintenance schedules and service life expectations apply to KARL Quadro basic equipment systems?

KARL Quadro basic equipment systems require quarterly inspection of structural connections and annual verification of ESD surface resistance using standard ohmmeter testing according to DIN EN 61340-5-1 protocols. The modular aluminum framework typically provides 15-20 years of service life under normal industrial conditions with semi-annual cleaning using approved anti-static cleaning solutions for ESD variants. Critical maintenance includes monthly verification of grounding connections, annual load-bearing capacity checks not exceeding manufacturer specifications, and replacement of worn ESD mats or work surfaces when resistance measurements fall outside the 10^6 to 10^9 ohm range during routine electrical testing procedures.

Table system basic equipment

Workplaces QUADRO

Add to Wish List Add to Compare

Karl 10.055.28. ESD-Arbeitstisch Quadro Basisausstattung, 2135x880x2200 mm
€2,013.00
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Karl 10.055.26. ESD-Arbeitstisch Quadro Basisausstattung, 2135x880x2200 mm
€2,013.00
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Karl 10.055.22. ESD-Arbeitstisch Quadro Basisausstattung, 2135x880x2200 mm
€2,013.00
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Karl 10.055.24. ESD-Arbeitstisch Quadro Basisausstattung, 2135x880x2200 mm
€2,013.00
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Karl 10.055.23. ESD-Arbeitstisch Quadro Basisausstattung, 2135x880x2200 mm
€2,008.60
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Karl 10.050.28. ESD-Arbeitstisch Quadro Basisausstattung, 2135x880x1600 mm
€1,851.30
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Karl 10.050.24. ESD-Arbeitstisch Quadro Basisausstattung, 2135x880x1600 mm
€1,851.30
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Karl 10.050.26. ESD-Arbeitstisch Quadro Basisausstattung, 2135x880x1600 mm
€1,851.30
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Karl 10.050.22. ESD-Arbeitstisch Quadro Basisausstattung, 2135x880x1600 mm
€1,851.30
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Karl 10.050.23. ESD-Arbeitstisch Quadro Basisausstattung, 2135x880x1600 mm
€1,851.30
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Karl 10.055.18. Arbeitstisch Quadro Basisausstattung, 2135x880x2200 mm
€1,824.90
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Karl 10.055.16. Arbeitstisch Quadro Basisausstattung, 2135x880x2200 mm
€1,824.90
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Karl 10.055.12. Arbeitstisch Quadro Basisausstattung, 2135x880x2200 mm
€1,824.90
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Karl 10.055.13. Arbeitstisch Quadro Basisausstattung, 2135x880x2200 mm
€1,824.90
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Karl 10.055.14. Arbeitstisch Quadro Basisausstattung, 2135x880x2200 mm
€1,824.90
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Karl 10.035.28. ESD-Arbeitstisch Quadro Basisausstattung, 1650x880x2200 mm
€1,799.60
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Karl 10.035.24. ESD-Arbeitstisch Quadro Basisausstattung, 1650x880x2200 mm
€1,799.60
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Karl 10.035.26. ESD-Arbeitstisch Quadro Basisausstattung, 1650x880x2200 mm
€1,799.60
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Karl 10.035.22. ESD-Arbeitstisch Quadro Basisausstattung, 1650x880x2200 mm
€1,799.60
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Karl 10.035.23. ESD-Arbeitstisch Quadro Basisausstattung, 1650x880x2200 mm
€1,799.60
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Karl 10.045.24. ESD-Arbeitstisch Quadro Basisausstattung, 2135x880x1000 mm
€1,711.60
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Karl 10.045.26. ESD-Arbeitstisch Quadro Basisausstattung, 2135x880x1000 mm
€1,711.60
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Karl 10.045.28. ESD-Arbeitstisch Quadro Basisausstattung, 2135x880x1000 mm
€1,711.60
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Karl 10.045.23. ESD-Arbeitstisch Quadro Basisausstattung, 2135x880x1000 mm
€1,711.60
Excl. 19% VAT , excl. Shipping Cost

The Karl Quadro Tischsystem Basisausstattung delivers a complete, ESD-safe workstation base configuration engineered for electronics manufacturing and precision assembly environments. Surface resistance values of 10⁵-10⁹ Ω (DIN EN 61340-5-1) are achieved through conductive HPL worktop materials and integrated EPA grounding points, ensuring continuous electrostatic discharge protection across every workstation component. Steel-frame construction supports static loads up to 150 kg, with height-adjustable frames spanning 720-1,080 mm to meet ergonomic requirements per EN ISO 9241-5.

As a specialist distributor for Karl workstation systems, esd.equipment stocks over 90 Quadro Basisausstattung configurations ready for immediate dispatch. All systems comply with IEC 61340-5-1 and DIN EN 61340-5-2, covering both component-level resistance requirements and complete EPA system validation. The Quadro modular platform allows post-purchase expansion with shelves, drawers, monitor arms, and overhead lighting - making the base kit a long-term investment rather than a fixed endpoint.

Key technical advantages - Karl Quadro Tischsystem Basisausstattung at a glance

⚡ 10⁵-10⁹ Ω surface resistance - ESD-safe worktop per IEC 61340-5-1

↕ 720-1,080 mm height range - ergonomic adjustment per EN ISO 9241-5

🛠 Up to 150 kg load capacity - welded steel frame with overload protection

⚙ Quadro modular system - compatible with shelves, drawers, risers, and uprights

🛡 Full EPA system grounding - integrated ground stud, total resistance <3.5×10⁷ Ω

✓ DIN EN 61340-5-2 certified - complete system validation, 10-15 year service life

Karl Quadro Basisausstattung - Product Overview

Configuration	Key Spec	Worktop Material	ESD Standard
Quadro Base Kit - Fixed Height	Fixed frame, 800/900/1,000 mm W	ESD HPL, 30 mm	IEC 61340-5-1
Quadro Base Kit - Height-Adjustable	720-1,080 mm, manual or electric	ESD HPL, 30 mm	IEC 61340-5-1
Quadro Base Kit - Double Bay	1,200-1,600 mm W, up to 150 kg	ESD HPL, 30 mm	DIN EN 61340-5-2
Quadro Base Kit - Corner Unit	90 degree, 1,000x1,000 mm	ESD HPL, 30 mm	IEC 61340-5-1
Quadro Base Kit - Heavy Duty	Reinforced steel, up to 300 kg	ESD HPL + steel inlay	DIN EN 61340-5-2

Typical application areas: Electronics assembly and SMT rework (IPC-A-610, IEC 61340-5-1), semiconductor handling and wafer-level inspection (SEMI S1/S2), medical device manufacturing (ISO 13485), automotive electronics production (IATF 16949, VDA 6.3), aerospace and defence assembly (AS9100D), precision mechanics and optical instrument integration.

✓

IEC 61340-5-1 Compliant All Karl Quadro base kits tested and certified for EPA workstation use

📦

90+ Configurations in Stock Fixed, height-adjustable, corner, and heavy-duty variants available immediately

🛡

Modular Expansion Ready Quadro uprights accept shelves, drawers, lighting, and monitor arms from Karl range