Did you know?

ESD clothing loses effect through washing. Fabric softener leaves an insulating film on the carbon threads, which is why makers specify the detergent and the cycle count.

Browse care products

Polo-Shirts

Polo-Shirt

ESD polo shirts made from 96% cotton with 4% conductive yarn combine the wearing comfort of natural fibres with the dissipative properties required for EPA areas. The short-sleeve shirts are available in numerous colours - black, white, cobalt blue, red, navy - and cover sizes from XS to 6XL. The cotton/conductive yarn blend fabric meets the requirements of IEC/EN 61340-5-1 as part of the ESD personal protection system and is suited to daily use in EPA zones.

54 items
4 manufacturers
Net prices plus VAT

View as Grid view List view

Show

per page

Add to Wish List Add to Compare

ESD polo shirt short sleeve black, 180 gsm piqué with conductive yarn
As low as €35.55
Add to Wish List Add to Compare

ESD polo shirt short sleeve cobalt blue, 180 gsm piqué, conductive yarn
As low as €35.55
Add to Wish List Add to Compare

ESD polo shirt short sleeve white, 180 gsm piqué with conductive yarn
As low as €35.55
Add to Wish List Add to Compare

ESD polo shirt short sleeve navy, 180 gsm piqué with conductive yarn
As low as €35.55
Add to Wish List Add to Compare

ESD polo shirt short sleeve red, 180 gsm piqué with conductive yarn
As low as €35.55
Add to Wish List Add to Compare

ESD polo shirt Conductex, short sleeve, navy, men - HB 08011 86004 002 45
As low as €50.68
Add to Wish List Add to Compare

ESD polo shirt Conductex men, short sleeve, knit, black/grey - HB-08011-86004-000-2186
As low as €50.68
Add to Wish List Add to Compare

ESD polo shirt Conductex, short sleeve, grey with blue collar, men - HB 08011 86004 000 2064
As low as €50.68
Add to Wish List Add to Compare

ESD polo shirt Conductex men, short sleeve, knit, blue/grey - HB-08011-86004-000-2031
As low as €50.68
Add to Wish List Add to Compare

ESD polo shirt Conductex, short sleeve, navy with grey collar, men - HB 08011 86004 000 2042
As low as €50.68
Add to Wish List Add to Compare

ESD polo shirt Conductex, short sleeve, white, men - HB 08011 86004 002 10
As low as €50.68
Add to Wish List Add to Compare

ESD polo shirt Conductex, short sleeve, black, men - HB 08011 86004 002 46
As low as €50.68
Add to Wish List Add to Compare

ESD polo shirt Conductex, short sleeve, grey, men - HB 08011 86004 002 50
As low as €50.68
Add to Wish List Add to Compare

ESD polo shirt Conductex men, long sleeve, knit, dark blue/grey - HB-08011-86008-000-2042
As low as €58.50
Add to Wish List Add to Compare

ESD polo shirt Conductex men, long sleeve, knit, blue/grey - HB-08011-86008-000-2031
As low as €58.50
Add to Wish List Add to Compare

ESD polo shirt Conductex, long sleeve, grey with blue collar, men - HB 08011 86008 000 2064
As low as €58.50
Add to Wish List Add to Compare

ESD polo shirt PRO, short sleeve, 150 g/m², schwarz
As low as €26.56
Add to Wish List Add to Compare

ESD polo shirt PRO, short sleeve, 150 g/m², blau
As low as €26.56
Add to Wish List Add to Compare

ESD polo shirt PRO PLUS, short sleeve, 210 g/m², hellgrau
As low as €38.55
Add to Wish List Add to Compare

ESD polo shirt PRO, short sleeve, dark grey, 150 g/m²
As low as €26.56
Add to Wish List Add to Compare

ESD polo shirt long sleeve, unisex, blue/black - Warmbier WB-2647-P
As low as €55.30
Add to Wish List Add to Compare

ESD polo shirt long sleeve, black, unisex - Warmbier
As low as €56.57
Add to Wish List Add to Compare

ESD polo shirt short sleeve, dissipative, grey, unisex - Warmbier
As low as €45.54
Add to Wish List Add to Compare

ESD polo shirt short sleeve, dissipative, black, unisex - Warmbier
As low as €45.54

Buying guide

How to choose Polo-Shirt

What matters when choosing: properties, comparison and typical applications.

Product features: ESD polo shirt 96/4 cotton/conductive yarn

⚡ 96% cotton, 4% conductive yarn - high natural fibre content for breathability and wearing comfort

✓ IEC/EN 61340-5-1 compliant - dissipative conductive yarn structure in EPA personal protection system

↕ Sizes XS-6XL - widest size range in the assortment

⚙ Colour range - black, white, cobalt blue, red, navy for colour coding concepts

✦ Machine washable - ESD properties maintained with proper care

Size and colour matrix

Colour	Available sizes
Black	XS-6XL
White	XS-6XL
Navy	XS-6XL
Cobalt blue	XS-6XL
Red	XS-6XL

Typical applications

Typical applications: Daily use in EPA zones of electronics manufacturing, component handling, assembly, and quality inspection without an outer garment, switchgear and field service in ESD areas, and storage and logistics with ESD protection requirements.

FAQ

Frequently asked questions about Polo-Shirt

What are ESD polo shirts and where are they primarily used in industrial applications?

ESD polo shirts are specialized garments constructed with conductive fibers that provide controlled electrostatic discharge protection for personnel working in static-sensitive environments. These garments maintain surface resistivity values typically between 10^6 to 10^11 ohms according to IEC 61340-5-1 standards, creating a controlled path for static electricity to dissipate safely. Primary applications include semiconductor manufacturing cleanrooms, pharmaceutical production facilities, electronics assembly lines, and explosive atmosphere zones where uncontrolled static discharge could damage sensitive components or create ignition hazards. The polo shirt design offers comfortable professional appearance while meeting strict ESD compliance requirements for industrial workers and technicians.

What are the key technical selection criteria for choosing ESD polo shirts with specific performance values?

Technical selection of ESD polo shirts requires evaluation of surface resistivity measurements, typically ranging from 10^8 to 10^10 ohms per square as measured by IEC 61340-2-3 test methods. Critical parameters include fabric conductivity retention after industrial washing cycles, with quality garments maintaining ESD properties for minimum 50 wash cycles at 60°C temperatures. Garment weight specifications typically range from 150-200 g/m² for optimal comfort and durability balance, while conductive fiber content usually comprises 2-5% of total fabric composition using carbon or copper-infused synthetic fibers. Additional selection factors include anti-static decay time under 2 seconds and compatibility with specific cleanroom classification requirements such as ISO 14644-1 Class 5 or Class 6 environments.

Which international standards and certifications apply to ESD protective polo shirts?

ESD polo shirts must comply with IEC 61340-5-1 standard for electrostatic discharge protection of electronic devices, which defines surface resistivity requirements and test procedures for protective clothing. EN 1149-5 European standard specifies material and design requirements for electrostatic dissipative protective clothing, including minimum conductivity values and washing durability criteria. ATEX Directive 2014/34/EU certification may be required for garments used in potentially explosive atmospheres, ensuring static discharge prevention in Zone 1 and Zone 2 hazardous locations. Additional applicable standards include ISO 14644-1 for cleanroom compatibility classifications and EN ISO 13688 for general requirements of protective clothing design and comfort parameters.

What are the main differences between ESD polo shirt variants available in the market?

ESD polo shirt variants differ primarily in conductive fiber integration methods, with carbon fiber woven models offering surface resistivity around 10^8 ohms compared to copper-infused variants providing 10^9 to 10^10 ohms resistance values. Cleanroom-certified variants feature lint-free synthetic fabric construction meeting ISO 14644-1 Class 5 requirements, while standard industrial models use cotton-polyester blends with conductive threading suitable for general manufacturing environments. Premium variants incorporate permanent ESD protection through intrinsic fiber conductivity that maintains performance beyond 100 wash cycles, whereas entry-level models rely on topical treatments providing 25-50 wash cycle durability. Color options typically include navy blue, gray, or white to meet specific facility dress code requirements while maintaining ESD functionality.

What installation and system compatibility requirements apply to ESD polo shirts in workplace environments?

ESD polo shirt implementation requires integration with comprehensive grounding systems including conductive flooring with resistance values between 10^6 to 10^9 ohms and personal grounding equipment such as wrist straps or heel grounders. Garments must maintain electrical continuity with other ESD protective equipment through direct skin contact or conductive underlayers, ensuring complete static dissipative path from person to ground. Workplace compatibility demands coordination with facility ESD control program per ANSI/ESD S20.20 standard, including regular resistance testing of worn garments using surface resistivity meters calibrated to IEC 61340-2-3 specifications. Environmental conditions such as relative humidity levels between 40-60% optimize garment conductivity performance, while storage in anti-static packaging prevents contamination of ESD properties before use.

What safety ratings and operating parameters define ESD polo shirt performance specifications?

ESD polo shirts typically maintain surface resistivity ratings between 10^8 to 10^11 ohms per square under standard test conditions of 23°C temperature and 25% relative humidity according to IEC 61340-2-3 measurement protocols. Operating temperature ranges extend from -10°C to +60°C for most industrial applications, with specialized variants rated for cleanroom environments maintaining ESD properties at controlled temperatures between 18-22°C. Garments demonstrate charge decay times under 2 seconds when tested per ANSI/ESD STM2.1 standard, ensuring rapid static dissipation during normal wear conditions. Washing durability ratings specify minimum 50 industrial wash cycles at 60°C while retaining ESD functionality, with premium variants certified for 100+ cycles maintaining surface resistivity within specification limits throughout their service life.

What maintenance schedules and inspection requirements ensure continued ESD polo shirt effectiveness?

ESD polo shirt maintenance requires quarterly resistance testing using calibrated surface resistivity meters to verify conductivity values remain within 10^8 to 10^11 ohms specification range per IEC 61340-2-3 standards. Industrial washing procedures must use ESD-safe detergents without fabric softeners, maintaining water temperatures below 60°C to preserve conductive fiber integrity throughout the garment's typical 2-3 year service life. Visual inspection protocols include checking for fabric damage, stretched areas, or wear patterns that could compromise electrical continuity, particularly at seams and high-stress points such as collar and cuffs. Replacement schedules typically specify garment retirement after 100 wash cycles for standard models or when surface resistivity measurements exceed 10^12 ohms, ensuring continuous protection in static-sensitive work environments.