Foil sealing equipment
ESD Packaging
-
-
-
-
-
- SAFEGUARD. Foil sealing device, infinitely variable, sealing seam 300x2mm€194.40Excl. 19% VAT , excl. Shipping Cost
- .Foil sealing device, infinitely variable, 200x2mm weld seam€149.50Excl. 19% VAT , excl. Shipping Cost
- E.Spare parts kit for foil sealing device, with cutting knife€59.28Excl. 19% VAT , excl. Shipping Cost
- .Spare part kit for foil sealing device, without cutting blade€33.25Excl. 19% VAT , excl. Shipping Cost
-
-
-
-
-
-
-
-
-
-
-
Film sealers for ESD-sensitive environments must satisfy IEC 61340-5-1 surface resistance requirements of 10⁵ - 10⁷ Ω on all contact surfaces while delivering consistent sealing temperatures between 130 and 200 °C for polyethylene, anti-static PE, and metallized ESD barrier films. Professional impulse and continuous-band models reach sealing times of 0.5-3 s, produce peel strengths above 3.5 N/15 mm, and accommodate film gauges from 50 to 250 µm in a single pass - parameters that directly determine package integrity during storage and transit of electrostatic-discharge-sensitive (ESDS) devices.
esd.equipment stocks 20 film sealer models engineered for EPA-compliant packaging workstations, sourced from specialist manufacturers and verified against DIN EN 61340-5-1 and ANSI/ESD S20.20 packaging requirements. From compact handheld impulse sealers for low-volume prototyping to bench-top continuous sealers handling 400 mm wide ESD barrier bags, every unit in this catalogue is selected for its suitability in controlled EPA environments where conventional tools would introduce charge-generation risks.
Impulse vs. Continuous-Band vs. Handheld Film Sealers - technical comparison
| Criterion | Impulse Sealer (ESD) | Continuous-Band Sealer | Handheld Impulse Sealer |
|---|---|---|---|
| Sealing principle | Impulse heating element, cools under pressure | Continuous heated band, motor-driven feed | Handheld impulse wire, manual pressure |
| Max. sealing width | Up to 400 mm | Up to 300 mm (ca.) | Up to 200 mm (ca.) |
| Throughput | Medium - 1 seal per 0.5-3 s cycle | High - continuous feed, ca. 8-12 m/min | Low - manual, batch or prototype use |
| Compatible film types | PE, anti-static PE, ESD shielding, metallized barrier | PE, anti-static PE, co-extruded multilayer | PE, anti-static PE (thin gauge) |
| ESD surface compliance | IEC 61340-5-1, ANSI/ESD S20.20 | Varies by model - verify before EPA use | Select models only - check datasheet |
| Typical film gauge | 50-250 µm | 50-150 µm (ca.) | 50-100 µm (ca.) |
| Footprint / portability | Bench-top, fixed EPA workstation | Bench-top, dedicated packaging line | Portable, flexible deployment |
| Typical application | ESD component packaging, SMT, board-level assembly | High-volume packaging lines, kitting | Lab, repair, low-volume prototyping |
Typical application areas: Electronics manufacturing and SMT assembly (IPC-A-610, IEC 61340-5-1), semiconductor backend packaging (SEMI S1/S2), medical device manufacturing requiring clean-room compatible ESD packaging (ISO 13485), automotive electronics and ECU assembly (IATF 16949, VDA 6.3), aerospace and defense component storage (AS9100), and PCB repair and rework stations requiring ANSI/ESD S20.20 compliant resealing of ESD shielding bags.