Festo SDAT-MHS-M80-1L-SA-E-0.3-M8 (1531266) Position Transmitter
€272.39
Excl. 19% VAT , excl. Shipping Cost
Article
FES-1531266
Manufacturer Nr.
SDAT-MHS-M80-1L-SA-E-0.3-M8
Position Transmitter
Frequently Bought Together
- This Item: €272.39Excl. 19% VAT , excl. Shipping Cost
- Festo SRBS-Q12-25-E270-EP-1-S-M8 (2393548) Position Sensor €104.56Excl. 19% VAT , excl. Shipping Cost
- Festo SMH-S1-HGR10 (175712) Position Sensor €119.41Excl. 19% VAT , excl. Shipping Cost
Total price
| Design | For T-slot |
| Permission | RCM mark c UL us - Listed (OL) |
| CE certificate (see declaration of conformity) | to EU EMC directive |
| KC-mark | KC-EMV |
| Material information | halogen free RoHs compliant |
| Measured parameter | Position |
| Measurement principle | Hall magnetic |
| Recording range [µm] | 0 to 80000 |
| ambient temperature [°C] | -25 to 70 |
| Sampling interval type [ms] | 1 |
| Max. movement speed [m/s] | 3 |
| Resolution travel [mm] | 0,05 |
| Repeatability [mm] | 0,1 |
| Control output | PNP |
| Switching element function | Opener/closer switchable |
| Switch on time [ms] | < 2 ms |
| Switch off time [ms] | < 2 ms |
| Max. switching frequency [Hz] | 1.000 |
| Max. output current [mA] | 100 |
| Max. switching capacity DC [W] | 2,7 |
| Voltage drop [V] | 2,5 |
| Analogue output | 4 - 20 mA |
| Sensitivity current output [mA/mm] | 0,200 |
| Linearity error typical in ± mm | ±0.25 mm |
| Max. load resistance current output [Ohm] | 500 |
| Short circuit resistance | yes |
| Overload resistant | Available |
| Report | I-port IO-Link |
| IO-Link, report | Device V 1.1 |
| IO-Link, profile | Smart sensor profile |
| IO-Link, function classes | Teach channel Diagnosis Identification Binary data channel (BDC) Process data variables (PDV) |
| IO-Link, communication mode | COM3 (230.4 kBaud) |
| IO-Link, SIO mode support | yes |
| IO-Link, port type | A |
| IO-Link, process data width IN | 2 Bytes |
| IO-Link, process data contents IN | 12 bit PDV (position measurement) 4 bit BDC (position monitoring) |
| IO-Link, minimum cycle time | 1 ms |
| Operating voltage range DC [V] | 15 to 30 |
| residual ripple | 10 % |
| Reverse polarity protection | for all electrical connections |
| Electrical connection 1, connection type | Cable with plug |
| Electrical connection 1, connection technology | M8x1 A coded to EN 61076-2-104 |
| Electrical connection 1, number of pins / wires | 4 |
| Electrical connection 1, fastening type | Screw lock |
| Connection outlet direction | along |
| Plug contacts material | Copper allow Gold plated |
| Test conditions line | Bending radius strength to Festo standard Cable track: 5 million cycles, bending radius 28 mm Torsional strength > 300,000 cycles, ±270°/0.1 m |
| Cable length [MTR] | 0,3 |
| Line properties | Cable track+robot |
| Cable shield colour | Grey |
| Cable sleeve material | TPE-U(PUR) |
| Fastening type | Insertable from above into the slot Permanently screwed |
| installation position | arbitrary |
| Product weight [g] | 23 |
| Housing material | High-alloyed stainless steels PA reinforced brass nickel-plated Polyester |
| Locking nut material | Nickel-plated brass |
| Foil material | Polyester |
| Operation-readiness display | LED green |
| Switching status indicator | LED yellow |
| Status display | LED red |
| Setting options | IO-Link Button |
| Ambient temperature for moving cable placements [°C] | -20 to 70 |
| Protection category | IP65 IP68 |
| Manufacturer Nr. | SDAT-MHS-M80-1L-SA-E-0.3-M8 |
|---|---|
| Manufacturer | Festo |
| EAN | 4052568238087 |
| Weight | 0.080000 |
| HS-Code | 90318020 |
Customers Who Bought This Item Also Bought
Festo SRBS-Q12-25-E270-EP-1-S-M8 (2393548) Position Sensor
€104.56
Excl. 19% VAT , excl. Shipping Cost
Festo SRBS-Q12-32-E270-EP-1-S-M8 (2393549) Position Sensor
€111.62
Excl. 19% VAT , excl. Shipping Cost
Festo SDAT-MHS-M100-1L-SA-E-0.3-M8 (1531267) Position Transmitter
€301.21
Excl. 19% VAT , excl. Shipping Cost
Festo SRBS-Q1-10-E270-EP-1-S-M8 (2412001) Position Sensor
€89.02
Excl. 19% VAT , excl. Shipping Cost