Festo QSL-G1/8-4-100 (132048) Push-In L-Fitting
€2.28
Excl. 19% VAT , excl. Shipping Cost
Article
FES-132048
Manufacturer Nr.
QSL-G1/8-4-100
Push-In L-Fitting
Festo QSL-G1/8-4-100 (132048) Push-In L-Fitting is available to buy in increments of 100
Frequently Bought Together
- This Item: €2.28Excl. 19% VAT , excl. Shipping Cost
- Festo QS-G3/4-22 (8040613) Push-In Fitting €13.38Excl. 19% VAT , excl. Shipping Cost
- Festo QST-8-4 (130613) Push-In T-Connector €6.90Excl. 19% VAT , excl. Shipping Cost
Total price
| size | Standard |
| Nominal width [mm] | 2,8 |
| Seal type on stud | gasket |
| installation position | arbitrary |
| Packing size | 100 |
| Construction set up | Push-pull principle |
| Operating pressure complete temperature range [bar] | -0.95 to 6 |
| Temperature depending operating pressure [bar] | -0.95 to 14 |
| Maritime classification | see Certificate |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] Water according to manufacturer declaration at www.festo.com |
| Information about operating and control medium | Oiled operation possible |
| Corrosion resistant class KBK | 1 - low corrosion stress |
| ambient temperature [°C] | -10 to 80 |
| Product weight [g] | 13,0 |
| Pneumatic connection 1 | Male thread G1/8 |
| Pneumatic connection 2 | For hose exterior diameter 4 mm |
| Sleeve colour | blue |
| Material information | RoHs compliant |
| Housing material | PBT |
| Sleeve material | POM |
| Tube seal, hose seal material | NBR |
| Hose clamping segment material | High-alloyed stainless steels |
| Nominal tightening torque [Nm] | 7,00 |
| Tolerance to nominal tightening torque | ± 20 % |
| Manufacturer Nr. | QSL-G1/8-4-100 |
|---|---|
| Manufacturer | Festo |
| EAN | 4052568027001 |
| Weight | 0.012000 |
| HS-Code | 74122000 |
Customers Who Bought This Item Also Bought
