Reeco ESD workstation systems

3D Configurator

Premium & ClassicAccessories & lightingEN 61340-5-1

Work chairs

Reeco workstations

A chair inside an EPA is part of the path to ground. Seat shell, gas lift, base and castors all have to be dissipative, otherwise the operator breaks exactly the connection that is meant to protect them the moment they sit down. Reeco chairs are therefore antistatic throughout, not only in the upholstery.

The range covers four models. SOLO 10A with a multi-layer hardwood plywood seat and fabric cover, SOLO 20E with wipeable polyurethane for areas with solvents, COMFORT-C with a synchronised mechanism and 150 kg capacity, and PREMIUM-S with armrests as standard. Stools, foot rings, armrests and glides complete the range.

⚡ Dissipative throughout - seat, mechanism, base and castors as a closed path to ground

↕ Seat heights 410 to 550 mm - depending on model, foot ring for standing-height benches

✦ Capacity up to 150 kg - COMFORT-C with a synchronised mechanism from one lever

💡 Upholstery by environment - fabric for dry areas, polyurethane for solvents and cleanrooms

⚙ Castors or glides - antistatic non-marking castors as standard, glides as an alternative

Model	Seat height	Seat	Upholstery	Armrests
SOLO 10A	465 to 550 mm	480 x 460 mm	antistatic fabric	optional
SOLO 20E	420 to 550 mm	420 x 460 mm	polyurethane	optional
COMFORT-C	-	490 x 460 mm	fabric, navy or grey	at extra cost
PREMIUM-S	-	500 x 480 mm	fabric, navy blue	standard
Stool 20A	410 to 540 mm	330 mm diameter	polyurethane	-

Typical applications: Full-time workstations in electronics manufacturing, microscope and inspection benches with long seated periods, laboratory positions with solvents and cleaning chemicals, setup stations with frequent switching between sitting and standing, and training rooms inside the protected area.

✓ Closed path to grounddissipative from the seat shell to the castor

⚡ IEC 61340-5-1version for EPA workstations